those door lock screws !! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

R3cK · 10-22-2014, 08:40 AM

hey guys,

want to remove the door lock..
those screws drivin me nuts. any trick how to get those open?
dont want to mess them up at after the first unsuccessful tries...

teddyjr · 10-29-2014, 11:12 AM

Best to use the proper sized screwdriver. I use a Snap-On #3 Phillips which has an integrated hex boss at the base of the handle so I can use a hex wrench to assist leverage. Most importantly, make sure the handle is not misaligned. Finally, apply pressure into the screw by bearing down on it as you slowly apply turning pressure.

Remember to be careful and don't hurry; once those soft screws are boogered up you may as well get out the drill.

blkvrtswp · 10-29-2014, 11:18 AM

Use this with a ratchet or impact gun. Lean into it. Zip - done.

10-22-2014, 08:40 AM	#1
R3cK Zilvia Member Join Date: Nov 2011 Location: bavaria Posts: 159 Trader Rating: (0) Feedback Score: 0 reviews	those door lock screws !! hey guys, want to remove the door lock.. those screws drivin me nuts. any trick how to get those open? dont want to mess them up at after the first unsuccessful tries...

10-29-2014, 11:12 AM	#2
teddyjr Zilvia Junkie Join Date: May 2012 Location: St Petersburg, FL Posts: 306 Trader Rating: (13) Feedback Score: 13 reviews	Best to use the proper sized screwdriver. I use a Snap-On #3 Phillips which has an integrated hex boss at the base of the handle so I can use a hex wrench to assist leverage. Most importantly, make sure the handle is not misaligned. Finally, apply pressure into the screw by bearing down on it as you slowly apply turning pressure. Remember to be careful and don't hurry; once those soft screws are boogered up you may as well get out the drill.

10-29-2014, 11:18 AM	#3
blkvrtswp Zilvia Addict Join Date: Oct 2012 Location: NY Posts: 691 Trader Rating: (9) Feedback Score: 9 reviews	Use this with a ratchet or impact gun. Lean into it. Zip - done.