Small Questions Thread (SEARCH FIRST! Use this instead of making NEW threads) - Page 236 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

towlie · 07-29-2011, 01:51 PM

Quote:

Originally Posted by dopplganger1

NissanParts.cc - Your #1 Source for OEM Parts and Accessories
scroll down a little $1.50 its in olympia so its like a 2 hour drive or if you order it and ship it Ive always gotten stuff the day after they ship it just call up and ask for russell great guy

I know Russell lol. It's out of stock currently

But thanks

Quote:

Originally Posted by codyace

No, get the gasket. Sentra SE-R at a local dealer should have it.

Okay, will do.

Express shipping from FRsport, already ordered

Thanks Ace!

axiomatik · 07-29-2011, 02:10 PM

Quote:

Originally Posted by codyace

I was under the impression S13 Balljoints didn't press into s14 LCA

I assumed that he was referring to the fronts, though I see now that he didn't specify.....

S14 balljoints press into s13 FLCAs. Don't know why the opposite wouldn't be true.

codyace · 07-29-2011, 03:06 PM

Quote:

Originally Posted by WakeBHR

you have both diameters where it presses listed at 41mm. why wouldnt that work?

Oh DERP

Ace is a

here!

Quote:

Originally Posted by POSmiata

The question isn't of price, if I have to get one I will. I have two jobs, one for bills, one for play. I'll give searching another shot, but I came up with all these thread that didn't seem relevant to the answer I'm searching for.

No need to defend yourself, was just saying that it's 99% true, or swaps end up being haggard.

There are plenty of RB guides out there, heck I've read a few and wouldn't ever go RB in 100 years. Neat engines, but too exclusive for me.

Quote:

Originally Posted by axiomatik

I assumed that he was referring to the fronts, though I see now that he didn't specify.....

S14 balljoints press into s13 FLCAs. Don't know why the opposite wouldn't be true.

I was an idiot and didn't read/know 100%

*Wake* · 07-29-2011, 03:15 PM

Quote:

Originally Posted by Circuit-180sx

What front lip is this?

That is a Bings.ca lip Or replica from ebay.
They even stole bings pic fortheir ad. Unless Bings is also selling them on ebay.

Hes a member here. Support him before ebay.
Besides, that lip and CDTRL's are the only reason to keep a chuki bumper IMO

Hanzi · 07-29-2011, 05:11 PM

Thinking about buying a wink mirror. Are there any tools that I need in order to install?
thanks.

I drive a s13 btw.

codyace · 07-29-2011, 05:50 PM

Quote:

Originally Posted by Hanzi

Thinking about buying a wink mirror. Are there any tools that I need in order to install?
thanks.

I drive a s13 btw.

A roll cage. Spend the money elsewhere. Poser track cars really irritate car guys.

POSmiata · 07-29-2011, 06:11 PM

T

Quote:

Originally Posted by codyace

Oh DERP

Ace is a

here!

No need to defend yourself, was just saying that it's 99% true, or swaps end up being haggard.

There are plenty of RB guides out there, heck I've read a few and wouldn't ever go RB in 100 years. Neat engines, but too exclusive for me.

I was an idiot and didn't read/know 100%

Can you share the links? Only semihelpful rb site I've found was skylinaustraila or w.e the name is.

soreballz · 07-29-2011, 06:18 PM

Does anybody know of a Nissan dealer that has online parts catalog that doesn't suck dick, and is willing to ship things? WestCo Nissan's site doesn't have shipping options, the Nissanparts.cc website has a fucked search function and doesn't list any of the basic shit I need, and Russ (from Nissan.cc) hasn't replied to the PM I sent him yesterday.

And no, my local dealership isn't an option. They're double the price of most others, EVERYTHING needs to be special ordered, and they take forevvvvvver to get the special ordered parts in.

codyace · 07-29-2011, 06:19 PM

www.courtesynissan.com/parts

Utilizes an FSM style approach to parts

POSmiata · 07-29-2011, 06:22 PM

Thanks man

*Wake* · 07-29-2011, 06:30 PM

Quote:

Originally Posted by codyace

www.courtesynissan.com/parts

Utilizes an FSM style approach to parts

Second this. Like the most reliable place for OEM shit i have ever found. Basically if they dont have it, its discontinued.

toplevel · 07-29-2011, 06:55 PM

Quote:

Originally Posted by sukimoto

What is this? Its between the driver side (u.s. passenger side) shock tower and the firewall.

s13 silvia k's
sr20det
1992

i'm trying to figure out what this is

soreballz · 07-29-2011, 07:15 PM

Quote:

Originally Posted by codyace

www.courtesynissan.com/parts

Utilizes an FSM style approach to parts

Quote:

Originally Posted by WakeBHR

Second this. Like the most reliable place for OEM shit i have ever found. Basically if they dont have it, its discontinued.

Shit yeah, awesome. Thanks, fellas.

murdoc111210 · 07-30-2011, 12:14 AM

does anyone know if an se zenki sun roof assembly would just straight bolt on to a zenki roof?????
I have a zenki with a hatch like sun roof widow but its missing a bolt and has leaks so I was thinking If its possible to just bolt on the se sun roof assembly.
Thanks

jesse_s13 · 07-30-2011, 10:59 AM

95 s14 4lug.

Question: Bought a wheel bearing from autozone is the front bearing from a 4 lug hub and 5 lug hub the same?

***S14DB*** · 07-30-2011, 03:14 PM

Quote:

Originally Posted by jesse_s13

95 s14 4lug.

Question: Bought a wheel bearing from autozone is the front bearing from a 4 lug hub and 5 lug hub the same?

You bought an S13 bearing.

JDM SPUG · 07-30-2011, 03:58 PM

Could a 17X9 rim with a 25 offset fit with the stock struts without any problems?

with a 245/40-17

DriftN00b · 07-30-2011, 04:28 PM

I remember i was on a site that had tons of jdm parts, and even yahoo auction translated to english. If you paid through their site, they basically bought the part for you. any one remember what it was?

soreballz · 07-30-2011, 04:31 PM

Quote:

Originally Posted by JDM SPUG

Could a 17X9 rim with a 25 offset fit with the stock struts without any problems?

with a 245/40-17

I have 17x9 +28 rims with 235/40s and stock-style struts. The tire just barely hit the strut. I now have 7mm spacers, and it's still pretty close. I doubt yours will clear. Or if they do, it'll be close. I wouldn't be surprised if the sidewalls rub the strut under deflection during hard corners with your 245s.

JDM SPUG · 07-30-2011, 04:34 PM

^ Thanks good to know.

Mista Lee · 07-30-2011, 07:05 PM

Is there a way to distinguish between stock 270cc injectors and 740cc tomei/nismo injectors without a flowbench?
ie, numbers or markings on the injectors?

chrisjakcj · 07-30-2011, 07:24 PM

Does any one know how to install an equalizer on a 90 240sx.

DoobieS13 · 07-30-2011, 09:30 PM

Quote:

Originally Posted by DriftN00b

I remember i was on a site that had tons of jdm parts, and even yahoo auction translated to english. If you paid through their site, they basically bought the part for you. any one remember what it was?

its www.bidjdm.com

xBtony · 07-30-2011, 10:02 PM

Why would my brake lights stay on? Like one night there fine the next there stuck on. and sudgestions before i start tearing shit apart haha

Umbys · 07-31-2011, 01:17 AM

Will a s13 header fit on a s14 ?

leung · 07-31-2011, 02:37 AM

Can anyone tell me how to remove the dust collar on my sr tranny so i can fit my driveshaft in? Am i supposed to just pull it off? TIA.

travisty_ · 07-31-2011, 03:04 AM

Quote:

Originally Posted by xBtony

Why would my brake lights stay on? Like one night there fine the next there stuck on. and sudgestions before i start tearing shit apart haha

You need to adjust your brake light switch, or possibly replace the rubber stopper on the part of the pedal that contacts the switch.

soreballz · 07-31-2011, 07:30 AM

Quote:

Originally Posted by leung

Can anyone tell me how to remove the dust collar on my sr tranny so i can fit my driveshaft in? Am i supposed to just pull it off? TIA.

Knock it out with a hammer. It's pressed on there fairly lightly.

GL Chrillz · 07-31-2011, 09:51 AM

I've tried searching a bit for this, but can't seem to find any answers about removing it. Do you need the rear cd deck? Does it help with the rigidity of the shell at all? or is it just there to hold the speakers? If you don't need it, how would i go about removing it?

240sxowner · 07-31-2011, 10:57 AM

will an oem fuel pump work on an sr blacktop? My car is an s13 and i took off a walbro gss341. will the oem have enough fuel pressure?

07-29-2011, 06:19 PM	#7059
codyace Post Whore! Join Date: Dec 2004 Location: Poconos, PA Age: 39 Posts: 8,030 Trader Rating: (58) Feedback Score: 58 reviews	www.courtesynissan.com/parts Utilizes an FSM style approach to parts __________________ *Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information! Quest Alternator Conversions for SR20!* Check my Group Buy! Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy

07-30-2011, 10:59 AM	#7065
jesse_s13 Nissanaholic! Join Date: Aug 2010 Location: Sacramento,CA/Fresno,CA/El Paso,Tx Posts: 1,829 Trader Rating: (5) Feedback Score: 5 reviews	95 s14 4lug. Question: Bought a wheel bearing from autozone is the front bearing from a 4 lug hub and 5 lug hub the same? __________________

07-30-2011, 07:05 PM	#7071
Mista Lee Zilvia FREAK! Join Date: May 2008 Location: Riverside, CA Age: 32 Posts: 1,003 Trader Rating: (26) Feedback Score: 26 reviews	Is there a way to distinguish between stock 270cc injectors and 740cc tomei/nismo injectors without a flowbench? ie, numbers or markings on the injectors? __________________

07-29-2011, 06:22 PM	#7060
POSmiata Join Date: Jul 2011 Location: Ft Myers, Fl Age: 33 Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	Thanks man

07-30-2011, 12:14 AM	#7064
murdoc111210 Join Date: Jul 2011 Location: OC Age: 34 Posts: 22 Trader Rating: (3) Feedback Score: 3 reviews	does anyone know if an se zenki sun roof assembly would just straight bolt on to a zenki roof????? I have a zenki with a hatch like sun roof widow but its missing a bolt and has leaks so I was thinking If its possible to just bolt on the se sun roof assembly. Thanks

07-30-2011, 03:58 PM	#7067
JDM SPUG Zilvia Junkie Join Date: Mar 2011 Location: NY Posts: 345 Trader Rating: (7) Feedback Score: 7 reviews	Could a 17X9 rim with a 25 offset fit with the stock struts without any problems? with a 245/40-17

07-30-2011, 04:28 PM	#7068
DriftN00b Zilvia Member Join Date: Apr 2011 Location: 626 Posts: 232 Trader Rating: (0) Feedback Score: 0 reviews	I remember i was on a site that had tons of jdm parts, and even yahoo auction translated to english. If you paid through their site, they basically bought the part for you. any one remember what it was?

07-30-2011, 04:34 PM	#7070
JDM SPUG Zilvia Junkie Join Date: Mar 2011 Location: NY Posts: 345 Trader Rating: (7) Feedback Score: 7 reviews	^ Thanks good to know.

07-30-2011, 07:24 PM	#7072
chrisjakcj Leaky Injector Join Date: May 2011 Location: norwalk ca Age: 31 Posts: 114 Trader Rating: (1) Feedback Score: 1 reviews	Does any one know how to install an equalizer on a 90 240sx.

07-31-2011, 01:17 AM	#7075
Umbys Zilvia Member Join Date: Jan 2011 Location: Connecticut Posts: 228 Trader Rating: (3) Feedback Score: 3 reviews	Will a s13 header fit on a s14 ?

07-31-2011, 02:37 AM	#7076
leung Zilvia FREAK! Join Date: May 2010 Location: NYC - HK Posts: 1,234 Trader Rating: (73) Feedback Score: 73 reviews	Can anyone tell me how to remove the dust collar on my sr tranny so i can fit my driveshaft in? Am i supposed to just pull it off? TIA.

07-31-2011, 09:51 AM	#7079
GL Chrillz Zilvia Junkie Join Date: May 2011 Location: ann arbor michigan Age: 33 Posts: 307 Trader Rating: (1) Feedback Score: 1 reviews	I've tried searching a bit for this, but can't seem to find any answers about removing it. Do you need the rear cd deck? Does it help with the rigidity of the shell at all? or is it just there to hold the speakers? If you don't need it, how would i go about removing it?

07-31-2011, 10:57 AM	#7080
240sxowner Leaky Injector Join Date: Jun 2011 Location: Indiana Age: 32 Posts: 89 Trader Rating: (2) Feedback Score: 2 reviews	will an oem fuel pump work on an sr blacktop? My car is an s13 and i took off a walbro gss341. will the oem have enough fuel pressure?