This is the interior thread - Page 204 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Nessaholiclover1 · 01-20-2013, 10:34 PM

Hey how did you hook up your horn to work and the steering wheel to work with the turn signal clicks as you twist the steering wheel? I have a '90 240sx SE with cruise control. The USDM 240sx steering wheel has two vertical plastic trims at the rear cover of the steering wheel that is used to cancel the turn signal switch when the driver is done turning. But this Momo wheel does not have that rear trim and it does not have the ground clock spring located on the USDM steering wheels. Do you cancel your own turn signal switch manually when done turning? I am for the meanwhile, thanks

***FaLKoN240*** · 01-20-2013, 11:39 PM

Quote:

Originally Posted by Nessaholiclover1

Hey how did you hook up your horn to work and the steering wheel to work with the turn signal clicks as you twist the steering wheel? I have a '90 240sx SE with cruise control. The USDM 240sx steering wheel has two vertical plastic trims at the rear cover of the steering wheel that is used to cancel the turn signal switch when the driver is done turning. But this Momo wheel does not have that rear trim and it does not have the ground clock spring located on the USDM steering wheels. Do you cancel your own turn signal switch manually when done turning? I am for the meanwhile, thanks

A good hub has little pegs that you place like this : between the two white signal cancelers. That way when you turn the wheel and they're like this - -between the cancelers, and when you resume normal position they have activated and cancelled the turn signal. I don't have any pics for reference.

Nessaholiclover1 · 01-21-2013, 10:26 AM

Thanks for the reply, but I think you misunderstood my question. I'm not speaking of an aftermarket Momo steering wheel, which I'm pretty sure they have hubs with pegs as you mentioned. I'm speaking of the Nissan Momo type x optional steering wheel. I installed it yesterday and noticed that is does not match with pegs for the turn signals, nor does it have a clock spring like our USDM wheels. So s13 owners that have this wheel, I was wondering what they did to make the horn work, and have the ease with canceling the turn signals, because I am doing them manually right now.

***FaLKoN240*** · 01-21-2013, 11:28 PM

Is that Type X wheel off a HICAS model car? Because HICAS is totally different from non-HICAS

RainbowMilk · 01-24-2013, 01:29 AM

so i did this today (car is in storage, sorry for the dirt everywhere, i cant wait for spring to clean her all up)

zeta 3 on buddy club rails (lower than stock by a lot but not mind blowing, im going to be playing with them a lot and finding out how to get lowest.)

nardi 350mm in silver

I need dmax floor mats!!! red or grey, so badly.

need to get all the sensors for my digital climate control so i can get that installed also.

blueshark123 · 01-24-2013, 10:11 AM

Damn ur pic looks like from the earlier 90's

Pinggg · 01-24-2013, 11:47 AM

Quote:

Originally Posted by Tom N

Can you tell me where you got the shift boot?

honestly i got it from a friend who got it off a MR2 forum groupbuy. Cost me $20 lol.

S_13_Sr. · 01-24-2013, 05:02 PM

Quote:

Originally Posted by Fracture

question to anyone that's used Rust-oleum Fabric and Vinyl spray. how stiff and crust do the fibers get afterwards and is there any way to soften it?

i was curious and had some left over from my headliner so i sprayed an extra rear seat i had. its honestly not bad. I actually decided to just do the entire rear seat and ordered some more paint from amazon to finish the rest of it.

it is stiffer but not much more and it looks decent. so until i reupholster my back seats they're gonna be sprayed.

i was running low on paint but you get the idea

S_13_Sr. · 01-24-2013, 05:13 PM

also got new seats. anyone know anything about them? the drivers side slides forward so possibly JDM?

new

old

nardi soon

also anyone have a defroster button they would like to sell

KA240SX808 · 01-24-2013, 07:11 PM

The new seats you got look like 96 Base Model 14 seats. Dark outside Grey inside.

S_13_Sr. · 01-24-2013, 07:16 PM

Quote:

Originally Posted by KA240SX808

The new seats you got look like 96 Base Model 14 seats. Dark outside Grey inside.

maybe Japanese base model?

i don't understand why the driver seat slides forward and not the passenger.

Chigga · 01-24-2013, 07:25 PM

Quote:

Originally Posted by S_13_Sr.

maybe Japanese base model?

i don't understand why the driver seat slides forward and not the passenger.

I have the same seats too and KA240SX808 is right.

S_13_Sr. · 01-24-2013, 07:40 PM

Quote:

Originally Posted by Chigga

I have the same seats too and KA240SX808 is right.

Your drivers side slides forward too?

mcnaughty · 01-24-2013, 11:50 PM

Quote:

Originally Posted by S_13_Sr.

Your drivers side slides forward too?

there designed to be in a lhd car so its usualy the pass side that slides forward to let people in the back but you fave monted them in a rhd so switched

David48 · 01-25-2013, 12:01 AM

Definitely just 96 base model. But still the nicest looking s14 seats imo

qwerth · 01-25-2013, 12:04 AM

Yupp my 96 base came with those

*Wake* · 01-25-2013, 01:02 AM

Quote:

Originally Posted by mcnaughty

there designed to be in a lhd car so its usualy the pass side that slides forward to let people in the back but you fave monted them in a rhd so switched

Do you know you right from your left?

S_13_Sr. · 01-25-2013, 01:55 AM

hmm my only guess is jdm 96 base s14 came with them as well??

i was under the impression that they were usdm but my buddy swore they were JDM. he purchased them form RRR garage way back when they were still around. they use to import used jap parts believe they had something to do with up garage.

any way they are spotless foam is good and they make my car look way better.

mantas · 01-25-2013, 01:57 AM

I got the same seats and both of mine slide and open up to let passengers in the back idk wtf is wrong with yours lol. And those are definitely my favorite s14 seats, might be also because mine are in mint condution.

S_13_Sr. · 01-25-2013, 02:02 AM

Quote:

Originally Posted by mantas

I got the same seats and both of mine slide and open up to let passengers in the back idk wtf is wrong with yours lol. And those are definitely my favorite s14 seats, might be also because mine are in mint condution.

nothing is wrong with my seats. yes both my seats slide and they both lean forward to let passengers in but like most usdm two door cars the passenger seat should do both lean forward and slide with just pulling the reclining lever.

in japan passenger seat is our drivers side so my drivers seat does this

living4surf · 01-25-2013, 05:50 AM

Both of mine did it in my s14 if I remember correctly

e5s4y · 01-25-2013, 09:43 AM

Quote:

Originally Posted by Pinggg

New PBM knob.

Pinggg, details on your dash?

that pbm knob looks awesome in black. I have an older one in copper, and the copper is starting to flake off >_<

Nessaholiclover1 · 01-25-2013, 10:07 AM

No, it was for either or

Pinggg · 01-25-2013, 02:45 PM

Quote:

Originally Posted by e5s4y

Pinggg, details on your dash?

that pbm knob looks awesome in black. I have an older one in copper, and the copper is starting to flake off >_<

Leather stich that a buddy of mine did for me. Only maybe seen 1-2 other 240's that has it.

tricky_ab · 01-25-2013, 10:28 PM

SaNTi · 01-26-2013, 12:17 AM

S15. My next car. Couple more years!!

tricky_ab · 01-26-2013, 08:07 AM

Quote:

Originally Posted by SaNTi

S15. My next car. Couple more years!!

S15...next year

I can't freakin' wait!

Corbic · 01-26-2013, 08:37 AM

Quote:

Originally Posted by tricky_ab

S15...next year

I can't freakin' wait!

Fuck Canada

VAs13 · 01-26-2013, 09:10 AM

Having S15 interior in my new car will suffice for me selling my S15 a while back.

wh0aitznic0 · 01-26-2013, 04:28 PM

Quote:

Originally Posted by tricky_ab

the fact that there's no real legal way to daily drive an S15 in new jersey...

01-25-2013, 12:01 AM	#6105
David48 Zilvia Addict Join Date: Jun 2009 Location: Tampa, Fl Age: 30 Posts: 991 Trader Rating: (11) Feedback Score: 11 reviews	Definitely just 96 base model. But still the nicest looking s14 seats imo __________________

01-25-2013, 12:04 AM	#6106
qwerth Nissanaholic! Join Date: Feb 2011 Location: あなたのお母さんの家 Southern Cali Posts: 1,619 Trader Rating: (25) Feedback Score: 25 reviews	Yupp my 96 base came with those __________________ DarkMagician Instagram

01-20-2013, 10:34 PM	#6091
Nessaholiclover1 Zilvia Junkie Join Date: Jul 2009 Location: California Age: 33 Posts: 554 Trader Rating: (17) Feedback Score: 17 reviews	Hey how did you hook up your horn to work and the steering wheel to work with the turn signal clicks as you twist the steering wheel? I have a '90 240sx SE with cruise control. The USDM 240sx steering wheel has two vertical plastic trims at the rear cover of the steering wheel that is used to cancel the turn signal switch when the driver is done turning. But this Momo wheel does not have that rear trim and it does not have the ground clock spring located on the USDM steering wheels. Do you cancel your own turn signal switch manually when done turning? I am for the meanwhile, thanks

01-21-2013, 10:26 AM	#6093
Nessaholiclover1 Zilvia Junkie Join Date: Jul 2009 Location: California Age: 33 Posts: 554 Trader Rating: (17) Feedback Score: 17 reviews	Thanks for the reply, but I think you misunderstood my question. I'm not speaking of an aftermarket Momo steering wheel, which I'm pretty sure they have hubs with pegs as you mentioned. I'm speaking of the Nissan Momo type x optional steering wheel. I installed it yesterday and noticed that is does not match with pegs for the turn signals, nor does it have a clock spring like our USDM wheels. So s13 owners that have this wheel, I was wondering what they did to make the horn work, and have the ease with canceling the turn signals, because I am doing them manually right now.

01-21-2013, 11:28 PM	#6094
*FaLKoN240* Super Moderator Join Date: Jun 2004 Location: SoCal Temecula Posts: 16,885 Trader Rating: (73) Feedback Score: 73 reviews	Is that Type X wheel off a HICAS model car? Because HICAS is totally different from non-HICAS

01-24-2013, 01:29 AM	#6095
RainbowMilk Leaky Injector Join Date: Jan 2013 Location: Kamloops, BC Age: 31 Posts: 55 Trader Rating: (1) Feedback Score: 1 reviews	so i did this today (car is in storage, sorry for the dirt everywhere, i cant wait for spring to clean her all up) zeta 3 on buddy club rails (lower than stock by a lot but not mind blowing, im going to be playing with them a lot and finding out how to get lowest.) nardi 350mm in silver I need dmax floor mats!!! red or grey, so badly. need to get all the sensors for my digital climate control so i can get that installed also.

01-24-2013, 10:11 AM	#6096
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	Damn ur pic looks like from the earlier 90's

01-24-2013, 05:13 PM	#6099
S_13_Sr. Zilvia Junkie Join Date: Sep 2008 Location: SoCal Age: 35 Posts: 385 Trader Rating: (10) Feedback Score: 10 reviews	also got new seats. anyone know anything about them? the drivers side slides forward so possibly JDM? new old nardi soon also anyone have a defroster button they would like to sell

01-25-2013, 01:55 AM	#6108
S_13_Sr. Zilvia Junkie Join Date: Sep 2008 Location: SoCal Age: 35 Posts: 385 Trader Rating: (10) Feedback Score: 10 reviews	hmm my only guess is jdm 96 base s14 came with them as well?? i was under the impression that they were usdm but my buddy swore they were JDM. he purchased them form RRR garage way back when they were still around. they use to import used jap parts believe they had something to do with up garage. any way they are spotless foam is good and they make my car look way better.

01-25-2013, 01:57 AM	#6109
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	I got the same seats and both of mine slide and open up to let passengers in the back idk wtf is wrong with yours lol. And those are definitely my favorite s14 seats, might be also because mine are in mint condution.

01-25-2013, 05:50 AM	#6111
living4surf Nissanaholic! Join Date: Apr 2008 Location: jupiter Age: 38 Posts: 1,701 Trader Rating: (52) Feedback Score: 52 reviews	Both of mine did it in my s14 if I remember correctly

01-25-2013, 10:07 AM	#6113
Nessaholiclover1 Zilvia Junkie Join Date: Jul 2009 Location: California Age: 33 Posts: 554 Trader Rating: (17) Feedback Score: 17 reviews	No, it was for either or

01-25-2013, 10:28 PM	#6115
tricky_ab Post Whore! Join Date: Sep 2008 Location: It's dark, and hell is hot! Posts: 9,414 Trader Rating: (23) Feedback Score: 23 reviews

01-26-2013, 12:17 AM	#6116
SaNTi Zilvia Addict Join Date: Aug 2009 Location: Toronto Posts: 690 Trader Rating: (0) Feedback Score: 0 reviews	S15. My next car. Couple more years!!

01-26-2013, 09:10 AM	#6119
VAs13 Nissanaholic! Join Date: Nov 2006 Location: Tampa, FL Posts: 2,099 Trader Rating: (28) Feedback Score: 28 reviews	Having S15 interior in my new car will suffice for me selling my S15 a while back.