Emance Rom Tune Answers

[jerryscherry]

Jason did my tune yesterday, i drove all the way down and it was well worth the price he gave me.

I have a KA-T t3/t4, n60 MAF, 370 injectors. He re soldered my ecu because it seem some pins weren't touching, found out my timing was advanced causing detonation :O! were having problems with my apexi safc sending wrong signals to the ecu and fixed that too turns out i was running the wrong input output the whole time for my MAF! We did 3 pulls and were golden. he burned me 3 tunes just in case cus i wasn't sure of what kind of fuel pump i have, (previous owner claimed walbro 255, Its definatly not a walbro). he is a very careful person, making sure to double check and triple check everything, i've never had any experience with him through his online rom tunes side, but as a person and a tuner he is very reliable, knowledgable and focused. (i got to his house at like 9Pm LOL, and he had already tuned a bunch of cars that day.)

i would definately go back to him later on when i upgrade injectors etc. for a tune on the dyno.

For the price jason charged me, i wouldn't even be able to take that money to buy a entalpy tune. LOL. and keep in mind it included the street tuning tailored to my setup,resoldering my ecu, daughterboard install, troubleshooting my vehicle, plus 3 extra tunes.

I'd say if your local, don't hesitate to drive down to San diego for a street tune, or pay a tiny bit more and get a dyno tune if your setup is more aggresive. He's very good at what he does, also he tunes subaru's also , so all you subaru people that want a alternative to COBB xP.

And for people who can't reach him, he just got back in town like two days ago, so you should email him if you have any problems.

[Frankiegamer]

Hey guys I bought a chip off this guy a couple months ago and I just finished installing my KA-t set up like 3 weeks ago. The car turned on and would idle at 1000-1200 rpm and is running really rich.. The tune is for stock Maf 370cc injectors and a t25.. So I figured it would be ok to drive and as I drive down the street the car doesn't spool up and I get a check engine light. After an hour of diagnosing I take off the ECU and open it up and I see the chip doesn't want to stay connected to the board. So I've been emailing him for the past 2 weeks and have got no replys.. If anyone has had any issues like this please let me know so I can try and fix my problem thanks.. I would not buy from him again..

[240sxNUB]

I accually just recieved a reply answering all my questions he said he was on vacation so try and email him again so it's fresh

[jerryscherry]

Originally Posted by Frankiegamer

Hey guys I bought a chip off this guy a couple months ago and I just finished installing my KA-t set up like 3 weeks ago. The car turned on and would idle at 1000-1200 rpm and is running really rich.. The tune is for stock Maf 370cc injectors and a t25.. So I figured it would be ok to drive and as I drive down the street the car doesn't spool up and I get a check engine light. After an hour of diagnosing I take off the ECU and open it up and I see the chip doesn't want to stay connected to the board. So I've been emailing him for the past 2 weeks and have got no replys.. If anyone has had any issues like this please let me know so I can try and fix my problem thanks.. I would not buy from him again..

Email, PM, call and leave message, thats how he got back to me LOL.
he just got back in town so maybe u should try again. and are u talking about the whole daughterboard not wanting to stick to the ecu or just the small chip?

[haxoraxe]

hmm :/ he sended me a sr20 ecu with an sr20 motherboard when i ordered a ka24de e-mance tuned ecu for 265 $ in January lol, never got it running cause it burned because i thought it was a ka24de ecu since it had no sticker, but then realized the code was of a sr20 ecu (A12 001 b57 [4]) then tranfered my motherboard to my ka24de ecu and changed cj1 to cj2 and it wouldn't rev up and engine check light was on :/ maybe a confusion but he's a good seller, hard to contact about that tho, i wanted to know if there is a way to fix this... he wanted to send me a tuned performance chip for 65$ but would this solve my problem? how would i install it?? replace it on motherboard? its not cool since i paid 265 for something that didn't worked


just trying to get help about it jason, not asking refund, but would be awesome if you could send me something to make it work since 265 is pretty much a lot of money...
thanks

[jerryscherry]

Welcome to E~Mance Custom Tunes!

their website is back up, if anybody needs contact info

[Frankiegamer]

Originally Posted by jerryscherry

Email, PM, call and leave message, thats how he got back to me LOL.
he just got back in town so maybe u should try again. and are u talking about the whole daughterboard not wanting to stick to the ecu or just the small chip?

ive tried to get a hold of him already...
i ordered an entire ka24de ecu with the chip i wanted..
when i got it in the mail the chip was of the board so i opened it and put it on...
now whenever i drive my car and i hit like a messed up road or a speedbump the chip comes loose... also im having really strange issues with my check engine light now (started doing this today) its on when im at idle and turns off when i hit 1500 rpm and then turns back on after that and it seems to turn on and off when i step on the gas.. ive never seen anything like this.. if anyone can help me out i would really appreciate it thanks

[AdamR]

LOL at you guys still buying this stuff.

[PowerDrifter]

you guys are paying money to blow your engine! seriously go dyno tune and quit letting someone with a bad reputation guess what your setup should be. Dyno tune will be the most accurate in keeping your motor healthy and maxing out your mods hp

[jerryscherry]

Originally Posted by PowerDrifter

you guys are paying money to blow your engine! seriously go dyno tune and quit letting someone with a bad reputation guess what your setup should be. Dyno tune will be the most accurate in keeping your motor healthy and maxing out your mods hp

well for all you socal ppl he does do street tunes or dyno tunes for locals, im happy with my street tune for my 5psi basic setup. if i were to up the boost and get bigger injectors definitely a dyno tune

[Breitling]

Jason, sent you a couple emails in the past 3 days, please reply.

[mgramata]

Originally Posted by Breitling

Jason, sent you a couple emails in the past 3 days, please reply.

He won't lol

[Breitling]

Has he goen underground? I bought a tuned ECU from him last year abotu this time and he was very active in communication, what happened?

[haxoraxe]

he wont answer lol, he owes so much to so much people he just disappeared.. he never sended me the right ecu and i still paid 265$...

[S14DB]

Originally Posted by jerryscherry

well for all you socal ppl he does do street tunes or dyno tunes for locals, im happy with my street tune for my 5psi basic setup. if i were to up the boost and get bigger injectors definitely a dyno tune

Or a bigger fuel pump...

[jerryscherry]

Originally Posted by S14DB

Or a bigger fuel pump...

whoops forgot to type that, yes "AND" a bigger fuel pump walbro 255

[haxoraxe]

hmm, i was an angry customer, but Jason is making its best, he got a new guy and a new website (www.ecutunerguy.com)n and just helped me with a problem i had with his tune, hope this time everything goes well, but now, he's with good communication

[nosajton]

Originally Posted by haxoraxe

hmm, i was an angry customer, but Jason is making its best, he got a new guy and a new website (www.ecutunerguy.com) and just helped me with a problem i had with his tune, hope this time everything goes well, but now, he's with good communication

Thanks bud, trying one customer at a time.. new site.. hired a new guy ([email protected]) who does just customer service for me so I can focus on running the dyno and tuning.

[Howlermonkey]

Stop taking in new business until you have your current customers take care of?

[nosajton]

Originally Posted by Howlermonkey

Stop taking in new business until you have your current customers take care of?

I've hired a few people and am now taking in new business.

-J

[subtle_driver]

Originally Posted by nosajton

I've hired a few people and am now taking in new business.

-J

I have started working with ECU Tuner Guy to help with the huge mountain of backlogged emails, calls, and messages that come in every day as well as R & D, Diagnostics and sales. But my Main purpose is to take care of customers and leave more time for Jason to do his job and lower stress levels.

I am very knowledgeable and carry years of first hand experience as I have worked with him on-and off for many years and witnessed the birth of his company. I fabricated his exhaust, downpipe, installed parts configured and dialed in many of his own projects including the 700rwhp s14 street car and many, many others. If you wish to know what other projects we have done just ask.

here is my contact information if you have trouble contacting Jason, We are both busy and I am a full time mechanic and race director But I love taking care of customers and I talk a lot!

[email protected]
text, and I'll call back 760-315-2372 Keep in mind I have a full time day job so be patient

Breitling, please resend the emails, it may have gotten lost as Jason is changing some settings in the email software.

[haxoraxe]

++++ props to jason and justin, got my ecu chip in 3 days from usa to peru, didnt worked when i installed it and jason helped me and responded my emails within 5 mins, finally we figured out it was the dizzy and it had to be timed. Its working awsome and rev limiter is orgasm @7200. thanks bud

[nosajton]

Originally Posted by haxoraxe

++++ props to jason and justin, got my ecu chip in 3 days from usa to peru, didnt worked when i installed it and jason helped me and responded my emails within 5 mins, finally we figured out it was the dizzy and it had to be timed. Its working awsome and rev limiter is orgasm @7200. thanks bud

Glad it worked out my friend, this just goes to show you that a tune is only as good as the hardware and mechanics behind it.


glad its working buddy enjoy your ride!

Jason

[dabeetereater]

Originally Posted by nosajton

I've hired a few people and am now taking in new business.

-J

well since u can do that can i get my 110 bucks back for the bogus chips u burned for me over a year ago !!!!!!

[Anhell_ito]

Anyone know if they're still doing these?

[dabeetereater]

i would not fuck with this dude hes a big scammer and will screw you out of money !!!!!!

[nosajton]

I'm a scammer? LOL says the guy with 10 posts.

Yes I am still in business and if you are local to san diego, I can either do a street or dyno tune for you.

PM me if you are interested with your setup.

-J

[dabeetereater]

only fucking reason im on here dude is to bash you, you deliberately sent me 2 blank chips for my vw well over a year ago, and proceded to tell me to fuck off cause they did not work and took my fucking money,

whoever does business with this asshole is just asking for it i would STAY AWAY

[jerryscherry]

Originally Posted by nosajton

I'm a scammer? LOL says the guy with 10 posts.

Yes I am still in business and if you are local to san diego, I can either do a street or dyno tune for you.

PM me if you are interested with your setup.

-J

vouch for that , still continued to answer my questions few months after the tune. I will def take my car back to him for a tune when I get my gt2871r setup on my sr

Originally Posted by dabeetereater

only fucking reason im on here dude is to bash you, you deliberately sent me 2 blank chips for my vw well over a year ago, and proceded to tell me to fuck off cause they did not work and took my fucking money,

whoever does business with this asshole is just asking for it i would STAY AWAY

I've never had a problem with him, but then again, I've only dealt with him in person. cool guy, detected and fixed all my problems before tuning my car.

[dabeetereater]

yeah in person maybe but over the internet hes a bad ass, and takes peoples money and im not the only one if you read back though this thread.
dude still point blank peroid took my money and gave me shit in return but 2 .50 cent blank chips for my car, and would not do anything about it. quit returning emails and everything