help on turbo timer install!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SignalAutodrifter_D · 05-05-2005, 07:57 AM

ok i just bought a blitz DCII turbo timer....and i dint know that i needed to buy a harness so i ordered that and i got it all here...i hooked most of it up just need to find.....12V wire under the steering wheel to splice into..and a ignition wire to hook it up to....so if anyone knows what they may look like help me out...(tell me if its green with a yellow line or what not)

then i have that vacumm line that i need to hook up for boost reads..they say it goes to the throttle body but where..there is a spot on the lower left hand side that i can use but is that correct...please help

drew935 · 05-05-2005, 11:33 AM

I'm going off a S13 wire diagram.
B/R- ign 12v
B/W - 12v constant

As for the boost hose, tap it off you wastegate. You need a t- tap hose connector. Does the kit you bought have the connectors and the manual>?

Anyway, it should be straight forward from there.

SignalAutodrifter_D · 05-05-2005, 04:02 PM

koo that sounds good from there....!! have you done it before or you jus going of the wire diagram...??

drew935 · 05-05-2005, 04:46 PM

I haven't done it on any 240s. Just subies, evos, a civic, and one other car...

05-05-2005, 07:57 AM	#1
SignalAutodrifter_D Zilvia Member Join Date: Jul 2004 Location: Minnesota Posts: 195 Trader Rating: (1) Feedback Score: 1 reviews	help on turbo timer install!! ok i just bought a blitz DCII turbo timer....and i dint know that i needed to buy a harness so i ordered that and i got it all here...i hooked most of it up just need to find.....12V wire under the steering wheel to splice into..and a ignition wire to hook it up to....so if anyone knows what they may look like help me out...(tell me if its green with a yellow line or what not) then i have that vacumm line that i need to hook up for boost reads..they say it goes to the throttle body but where..there is a spot on the lower left hand side that i can use but is that correct...please help

05-05-2005, 11:33 AM	#2
drew935 Zilvia Addict Join Date: Nov 2003 Location: Silver Creek - San Jose Posts: 996 Trader Rating: (0) Feedback Score: 0 reviews	I'm going off a S13 wire diagram. B/R- ign 12v B/W - 12v constant As for the boost hose, tap it off you wastegate. You need a t- tap hose connector. Does the kit you bought have the connectors and the manual>? Anyway, it should be straight forward from there. __________________ I'm driving fast -drew

05-05-2005, 04:46 PM	#4
drew935 Zilvia Addict Join Date: Nov 2003 Location: Silver Creek - San Jose Posts: 996 Trader Rating: (0) Feedback Score: 0 reviews	I haven't done it on any 240s. Just subies, evos, a civic, and one other car... __________________ I'm driving fast -drew

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-05-2005, 04:02 PM	#3
SignalAutodrifter_D Zilvia Member Join Date: Jul 2004 Location: Minnesota Posts: 195 Trader Rating: (1) Feedback Score: 1 reviews	koo that sounds good from there....!! have you done it before or you jus going of the wire diagram...??