Quote:
Originally Posted by MrTalmus
Well, lack of knowlage might be the answer to why I'm making it harder.
I don't really see how I could drill and tap a new hole as the line adapter would need a flat surface to let the copper ring make a seal. If I had the tool's to do it I would have considered it, but I don't really see how as I got a very limited amount of tools and resources.. Using a bigger drill bit after tapping wouldn't make a flat surface either.
For the vacuum line, knowing what to do is one thing. Knowing why is another. And altough I appreciate your reply, do you have an explenation on what those line's do and what purpose they have?
Thanks!
|
Throw the banjo fitting in the trash. Drill and tap for an AN fitting of adequate size. You do not need a flat surface for this. My recommendation, find a larger thread than the current thread in the neck and utilize that size for the AN fitting.