|
For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
|
Thread Tools | Display Modes |
10-13-2015, 09:58 PM | #1 |
Leaky Injector
|
Tein tire rods, SPL outers, lug nuts, injectors, ruca
LOCATION: Collierville, TN
BEST CONTACT METHOD: PM PAYMENT OPTIONS: Cash or Paypal SHIPPING: At Buyers expense ITEM: SPL S13/S14 outer tie rods DESCRIPTION: only used for about 8K miles, switched to a different inner/outer tie rod setup for knuckles PRICE: $165($175 shipped) SOLD ITEM: Inner Tie Rods DESCRIPTION: Z33 Tein inner tie rods, only used for about 8k miles, needed longer tie rods because I got different knuckles. In very good condition. PRICE:$60 ($70 shipped) SOLD ITEM: OEM S15 480cc injectors, with S15 fuel rail and FPR DESCRIPTION: Good condition, working injectors pulled from a S15 SR20 PRICE: $100 ($115 shipped) ITEM: OEM S14 SR20 370cc injectors DESCRIPTION:working injectors pulled from a S14 SR20, some of the tips on the end are cracked/ missing the little tabs. Connectors pictured but not included. PRICE: $80 ($90 shipped) ITEM: 2.5" I.D. springs 2x Eibach 7" long 275lb (0700.250.0275) 2x GC/Eibach 5" long, ~430 lbs (GC125.64.75) 2x GC/Eibach 8" long, ~380lbs (GC200.64.67) PRICE: $70 shipped per pair ITEM: S13 Rear Upper control arms DESCRIPTION: Used, old RUCA. Will need new rod ends. PRICE: $10 ($20 shipped) ITEM: Lug nuts DESCRIPTION: Muteki Lug nuts, Neo chrome, being used for a while and the coating is chipping off but threads are perfect. Only have 17 so it would only work for 4 lug cars PRICE:$20 ($30 shipped) SOLD ITEM: FLCA DESCRIPTION: Godspeed FLCA. I started modifying these for roll center correction based on this write up: http://www.nissanroadracing.com/showthread.php?t=1407 I have already reamed out the bearing hole and pressed in the ABI-12T bearings. Will also include the 3/4" bolt, lock nuts, and the godspeed rod ends. I don't have the misalignment spacers for the rod ends. ( the bearings and hardware cost ~$50. PRICE:$100 ($120 shipped) ITEM: Stock S13 front spindles Price: $60 ($80 shipped) Last edited by zainracer; 12-14-2020 at 02:43 PM.. Reason: Prices updated! |
Sponsored Links |
10-14-2015, 11:15 PM | #4 |
Leaky Injector
|
I believe that the Z33 tie rods are a little shorter than the stock S13. The SPL outers give you extra length but I think the Z33 inner+ SPL outer might not give you a safe amount of thread engagement if you are adding 25mm to the flca. Using S14 inners with SPL outers would probably be a better option. |
Bookmarks |
Tags |
lug nuts, s13, spl, tein, tie rods |
|
|