PA F/S 1991 240sx preped, caged, painted, suspension..wheels, etc drift ready car - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JTunedMotorsports · 03-30-2011, 04:28 PM

Here for sale is my personal project/drift car…All it really needs is corner lights..and paint.I have a COMPLETE paint set for the car,clear, reducer, hardener, primer, paint, urethane activator, sealer,.revits and stainless mounting hardware for a ll body panel/kit..its not much to paint the car just light prep and spray.All paint is Dupont. Basically just paint exterior install lights and glass and its done!

I will give the cusomer the option of if they buy the car I will drop an sr20det in it if they provide engine or help them put most of it together..I am selling bc I have other cars and no time to drive it..Id like to see a buyer put it back together and race it..

91 couple base model...red clear title NO RUST. Never beat on or drifted etc..Was a street car..

Any ?’s plz pm or call Jim 4846148595
Car has a clear Pa title..in hand
Yes its still legal..can be driven on the street.

For the right price I will throw in a z32 trans in it.

Im gonna say 11,500k obo. or 13k painted .b/c i have to put a price up..but all reasonable offers considered..No trades plz

Here is the WHOLE album of the build..

Shop car prep pictures from cars photos on webshots

Parts

all parts are new
Bride zeta 3 seat gradiation
Nams super low seat double locking rail
all subframes cleaned and new bolts installed
Energy Suspension master busing kit
Solid S13 SPL alum sub frame bushings
8 point cage tig welded..miged floor plates
OEM dash bar tied in-dash fits back in..no cutting
.120 wall 1.75 mild steel cage material-corner gussets
Custom hydro ebrake kit with braded lines
Rebuilt and blasted z32 calipers..new seals etc
Z32 ferrodo ds2500 brake pads f-r
Agency power z32 braided conversion lines f+r
Brembo blank rotors all around
16/17 new z32 master cylinder
New abs booster s13
Nismo power brace s13
Kazama tension rods
S14 tein inner tie rods with spacer
Spl tie rod ends with bump steer adjustment
Spl full rear arms. ruca, tension, toe, traction
Spl steering rack bushings
R32 steering wheel
Walbro fuel pump kit installed..
2x Nams tow hook bars
Inside,cage and bay were sealed, primed and painted with oem -2008 nissan gtr red…then clear coated..I have extra paint etc.
30mm ichiba wheels spacers
25mm ichiba wheels spacers
Kryokugen lug nuts with 2 keys
17x9 rpf1 front 5x114.3 wheels
18.9.5 rpf1 rear 5x114.3 wheels
4x falken azenis tires 235/40/17 245.40/18
Aerocatch lockeing hood pins
New Brick Silvia headlights with halogen bulbs and corner light sockets...!

Complete set of paint, primer, sealer, etc 3k worth of paint supplies

rebuilt rear oem 4.08 r200 diff..Welded properly..pre heated
ma-motorsports steering angle knuckle kit. gusset flca'a with energy suspension bushing kit installed
moog ball joints
ichiba 5 lug hub conversion

I have all doors, glass, windows, moldings, orig working guagle cluster, driver dash parts with buttons, wiring harneses,climate controll,vents, every bolt, bracket etc for the car..in boxes labeled
2 keys, title, dash..all vins on the car etc...many new bolts for the car were installed,.

New Body kit Version Select IV Kit
front 20 mm single vent fender type 2
Tatakidashi Rear Fender (50mm)
Origin s13 silvia vented type 2 hood..(Rare)

CAR FEATURE>> THE RESURRECTION OF THE ZOMBIE CAR - Speedhunters

Same kit as this car...but less blister of rear fenders

JTunedMotorsports · 03-30-2011, 07:52 PM

this car has to go..or at least get some quick paint..then drop a engine it in...im willing to work with anyone interested..

Jtuned_andy · 03-30-2011, 08:50 PM

waa waa wee waa

JTunedMotorsports · 04-04-2011, 10:54 AM

car has to go..i can def work out prices with someone..im more then generous about it....i can get it painted or leave as is...im open to many options

krisdeezy · 04-04-2011, 01:35 PM

WOW ! This is pretty cheap ! someone should pick this up ! considering all the work it has done...

GLWS !

JTunedMotorsports · 04-05-2011, 10:49 AM

yea 10k...and its anyones.....also if anyone needs a motor il can get then one cheap

JTunedMotorsports · 07-13-2014, 11:28 PM

car sold lock thread.

03-30-2011, 04:28 PM	#1
JTunedMotorsports Zilvia.net GB Vendor Join Date: Apr 2006 Location: Philly Burbs Posts: 775 Trader Rating: (65) Feedback Score: 65 reviews	F/S 1991 240sx preped, caged, painted, suspension..wheels, etc drift ready car Here for sale is my personal project/drift car…All it really needs is corner lights..and paint.I have a COMPLETE paint set for the car,clear, reducer, hardener, primer, paint, urethane activator, sealer,.revits and stainless mounting hardware for a ll body panel/kit..its not much to paint the car just light prep and spray.All paint is Dupont. Basically just paint exterior install lights and glass and its done! I will give the cusomer the option of if they buy the car I will drop an sr20det in it if they provide engine or help them put most of it together..I am selling bc I have other cars and no time to drive it..Id like to see a buyer put it back together and race it.. 91 couple base model...red clear title NO RUST. Never beat on or drifted etc..Was a street car.. Any ?’s plz pm or call Jim 4846148595 Car has a clear Pa title..in hand Yes its still legal..can be driven on the street. For the right price I will throw in a z32 trans in it. Im gonna say 11,500k obo. or 13k painted .b/c i have to put a price up..but all reasonable offers considered..No trades plz Here is the WHOLE album of the build.. Shop car prep pictures from cars photos on webshots Parts all parts are new Bride zeta 3 seat gradiation Nams super low seat double locking rail all subframes cleaned and new bolts installed Energy Suspension master busing kit Solid S13 SPL alum sub frame bushings 8 point cage tig welded..miged floor plates OEM dash bar tied in-dash fits back in..no cutting .120 wall 1.75 mild steel cage material-corner gussets Custom hydro ebrake kit with braded lines Rebuilt and blasted z32 calipers..new seals etc Z32 ferrodo ds2500 brake pads f-r Agency power z32 braided conversion lines f+r Brembo blank rotors all around 16/17 new z32 master cylinder New abs booster s13 Nismo power brace s13 Kazama tension rods S14 tein inner tie rods with spacer Spl tie rod ends with bump steer adjustment Spl full rear arms. ruca, tension, toe, traction Spl steering rack bushings R32 steering wheel Walbro fuel pump kit installed.. 2x Nams tow hook bars Inside,cage and bay were sealed, primed and painted with oem -2008 nissan gtr red…then clear coated..I have extra paint etc. 30mm ichiba wheels spacers 25mm ichiba wheels spacers Kryokugen lug nuts with 2 keys 17x9 rpf1 front 5x114.3 wheels 18.9.5 rpf1 rear 5x114.3 wheels 4x falken azenis tires 235/40/17 245.40/18 Aerocatch lockeing hood pins New Brick Silvia headlights with halogen bulbs and corner light sockets...! Complete set of paint, primer, sealer, etc 3k worth of paint supplies rebuilt rear oem 4.08 r200 diff..Welded properly..pre heated ma-motorsports steering angle knuckle kit. gusset flca'a with energy suspension bushing kit installed moog ball joints ichiba 5 lug hub conversion I have all doors, glass, windows, moldings, orig working guagle cluster, driver dash parts with buttons, wiring harneses,climate controll,vents, every bolt, bracket etc for the car..in boxes labeled 2 keys, title, dash..all vins on the car etc...many new bolts for the car were installed,. New Body kit Version Select IV Kit front 20 mm single vent fender type 2 Tatakidashi Rear Fender (50mm) Origin s13 silvia vented type 2 hood..(Rare) CAR FEATURE>> THE RESURRECTION OF THE ZOMBIE CAR - Speedhunters Same kit as this car...but less blister of rear fenders Last edited by JTunedMotorsports; 04-05-2011 at 05:19 AM..

03-30-2011, 08:50 PM	#3
Jtuned_andy Zilvia FREAK! Join Date: Apr 2006 Location: East Coast Posts: 1,083 Trader Rating: (27) Rides Gallery: Jtuned_andy Feedback Score: 27 reviews	waa waa wee waa __________________

03-30-2011, 07:52 PM	#2
JTunedMotorsports Zilvia.net GB Vendor Join Date: Apr 2006 Location: Philly Burbs Posts: 775 Trader Rating: (65) Feedback Score: 65 reviews	this car has to go..or at least get some quick paint..then drop a engine it in...im willing to work with anyone interested..

04-04-2011, 10:54 AM	#4
JTunedMotorsports Zilvia.net GB Vendor Join Date: Apr 2006 Location: Philly Burbs Posts: 775 Trader Rating: (65) Feedback Score: 65 reviews	car has to go..i can def work out prices with someone..im more then generous about it....i can get it painted or leave as is...im open to many options

04-04-2011, 01:35 PM	#5
krisdeezy Zilvia Addict Join Date: Feb 2008 Location: three two three / The Rockk Age: 30 Posts: 913 Trader Rating: (17) Feedback Score: 17 reviews	WOW ! This is pretty cheap ! someone should pick this up ! considering all the work it has done... GLWS !

04-05-2011, 10:49 AM	#6
JTunedMotorsports Zilvia.net GB Vendor Join Date: Apr 2006 Location: Philly Burbs Posts: 775 Trader Rating: (65) Feedback Score: 65 reviews	yea 10k...and its anyones.....also if anyone needs a motor il can get then one cheap

07-13-2014, 11:28 PM	#7
JTunedMotorsports Zilvia.net GB Vendor Join Date: Apr 2006 Location: Philly Burbs Posts: 775 Trader Rating: (65) Feedback Score: 65 reviews	car sold lock thread.