NY Full KA-T swap (testing waters)

[1989RHS13]

Alright guys, I'm getting rid of my KA-T. I decided i want to go RB.

Rebuilt KA:
CP pistons .20 over bored
Eagle Rods
Clevite77 rod bearings
OEM Nissan main bearings
ARP Head studs and main studs
Cometic 90mm MLS headgasket
All Gaskets replaced
All Machine work done at a reputable shop here in Buffalo, NY, North East Machine (have the receipt for all the work done)

The turbo setup:
GT2871R .64 A/R (has FRsport turbo inlet adaptor for 3in coupler)
Aftermarket wastegate actuator for 14psi
SSAutochrome Turbo manifold
Megan Turbo Elbow
Oil Sandwhich plate
JGS turbo feed oil line
Oil pan Tapped for oil return
Custom HMIC Setup
4 layer couplers with t-bolt clamps
Synapse BOV with recirc fitting and anti-stall fittings
Z32 TT MAFS
Silicone blue rad hoses (upper hose cut in half for aftermarket temp sensor)

Drivetrain:
5 Speed trans with about 90k miles
ACT 6 puck HD unsprung clutch
New clutch slave cylinder
ER spec Steel 15lb one piece driveshaft

Electronics/fuel:
EFI Specialists ROM tuned ECU
Deatchworks 740cc injectors
Isis FPR
Engine wiring harness (which comes with the harness for an Apexi SAFC neo soldered on, and the harness has been stripped of all unneeded plugs)

Theres more little things that i'm forgetting. Sort of testing waters with this one. Looking to get 5k for a pretty much turn key KA-T set up.
Really the only things not included are my turbo intake tubes (but a Z32 MAF and filter ARE included), and the Rad and rad fans.

HELP ME ACQUIRE AN RB!!!

I need to get new pics, but heres what i have for now:

BOV not recirc'd in this pic



Feel free to ask questions, I have all the answers! Really NOT looking to part out either.

[toolbox27]

What kinda numbers were you putting down with this setup?

[1989RHS13]

Originally Posted by toolbox27

What kinda numbers were you putting down with this setup?

To be perfectly honest, i do not have a clue. Never dyno'd it.

[pignose90]

i sold my ka-t and got an rb GLWS bumps

[souljaseth33]

If you decide to part it out I'm interested in the HMIC. I'll come pick it up, I am in Albany. Feel free to text/call me at 518-618-8677 if you do part out.

[91_S13_240]

would u be intersted in selling just the motor

[1989RHS13]

Originally Posted by 91_S13_240

would u be intersted in selling just the motor

not unless i decide to part it out.

[KA-Life86]

Bump for a clean car an ka-t setup

[NJs13_1993]

if u wanna part i want the driveshaft

[onepiece]

if you can hold out bro i might have a rb for you but its just a long block

[1989RHS13]

Originally Posted by onepiece

if you can hold out bro i might have a rb for you but its just a long block

Thanks, but i'd be looking more towards a full rb swap or something along those lines.

[Mitsubayati]

No one's gonna buy you out. I tried selling my setup, now I have an RB25 and KA-T setup both in my garage lol.

Legit KA-t though. glws man. RB25s are the shit!

[1989RHS13]

Originally Posted by Mitsubayati

No one's gonna buy you out. I tried selling my setup, now I have an RB25 and KA-T setup both in my garage lol.

Legit KA-t though. glws man. RB25s are the shit!

Yeah I have the feeling its not all gonna go at once, if i cant get rid of it..i'll prolly just keep it for another year.

[1989RHS13]

Bumpin' it up!

[brian420sx]

Would you sell just the motor?