![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
![]() hello all! i had an idea to put these wiseco forged pistons for a dual cam into a single cam. i have searched around and have only found info about swapping single cam pistons into dual cam motors to raise the compression. the piston specs are 89.5 bore and 9.0:1 compression ratio. how would this affect the compression ratio in a single cam motor? if this is a possibility i would go turbo.
my car is an 89. not sure if it is 8.6:1 or 9.1:1. i can check manufacture date next time i drive it. any feedback on this is appreciated! |
|
![]() |
![]() |
Sponsored Links |
![]() |
#3 |
![]() |
![]() |
![]() |
#4 |
Zilvia FREAK!
![]() Join Date: Jan 2010
Location: SoCal/Ft Worth TX
Age: 30
Posts: 1,563
Trader Rating: (5)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 5 reviews
|
A 7:1 CR motor would be the laziest thing you'd ever drive in your life. Why not just put single cam pistons in it and run 9:1 comp? With a good tune that's not dangerous or anything, even on 91..
__________________
|
![]() |
![]() |
![]() |
#5 |
gotchya. i was curious about it because i already have the pistons for a dual cam but decided to go another route and build up a single cam. i will just list them for sale online and get single cam pistons. appreciate the responses guys. thanks a bunch!!
|
|
![]() |
![]() |
![]() |
#7 | |
Quote:
89.5 so .5 over stock and 9:1 comp. came out to about 600 including tax and shipping. lmk if you want them! |
||
![]() |
![]() |
![]() |
Bookmarks |
Tags |
240sx, ka-t, ka24de, ka24e, pistons |
Thread Tools | |
Display Modes | |
|
|