s13 uneven front camber - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

thom · 12-13-2020, 10:24 AM

So , i was just changing some settings before going to the alignment shop so the car will only need minimal adjustments.

I put the top knuckle bolts all the way in , and the camber plates were at the same position.

What i realized is that the driver's side (Left) has 1.5-2 more camber and wheel pokes out .

I later adjusted only the right side to hopefully bring it to the same camber but still big difference.

Car has :

Stock lca with new ball joints and pu bush
Daiyama coilovers
Driftworks tension rods
GK tech RCC

At the moment , in the attached photos with my camber tool i see:
Right : 4.5
Left: 5.5+ ( tool maxes at 5.5)

https://ibb.co/0hjcrvC

https://ibb.co/xfsjVJr

https://ibb.co/w7Rfgq5

12-13-2020, 10:24 AM	#1
thom Join Date: Jan 2018 Location: Greece Posts: 26 Trader Rating: (0) Feedback Score: 0 reviews	s13 uneven front camber So , i was just changing some settings before going to the alignment shop so the car will only need minimal adjustments. I put the top knuckle bolts all the way in , and the camber plates were at the same position. What i realized is that the driver's side (Left) has 1.5-2 more camber and wheel pokes out . I later adjusted only the right side to hopefully bring it to the same camber but still big difference. Car has : Stock lca with new ball joints and pu bush Daiyama coilovers Driftworks tension rods GK tech RCC At the moment , in the attached photos with my camber tool i see: Right : 4.5 Left: 5.5+ ( tool maxes at 5.5) https://ibb.co/0hjcrvC https://ibb.co/xfsjVJr https://ibb.co/w7Rfgq5 __________________