|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
08-27-2015, 02:21 PM | #1 |
Geomaster knuckle(sandwich)
Zilvia,
Looking for a little feedback. I'm running a geomaster front knuckle on an s14 and I'm not convinced that I've got the full potential out to them. I am thinking that my lca is extended a little too long. The tension rods fits to a point, but I think this is causing a little too much caster and an early lock-out on the control arm: Full lock to the left - driver side http://1drv.ms/1WVc0jS Full lock to the right - driver side http://1drv.ms/1WVc8zJ I did a quick measurement of roughly 16" +/- 1/8" from the center of the heim joint (subframe side) to the end of the lca. Also, my wheels do not rub the front of the fender. Before I start taking this all apart again, I am curious what others with similar configurations might be doing. Inputs appreciated, thanks in advance.
__________________
"If you can't fix it with a hammer, you've got an electrical problem" |
|
Sponsored Links |
Bookmarks |
Tags |
angle, geomaster, knuckle, steering |
|
|