Geomaster knuckle(sandwich) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

zac971 · 08-27-2015, 02:21 PM

Zilvia,

Looking for a little feedback. I'm running a geomaster front knuckle on an s14 and I'm not convinced that I've got the full potential out to them. I am thinking that my lca is extended a little too long. The tension rods fits to a point, but I think this is causing a little too much caster and an early lock-out on the control arm:

Full lock to the left - driver side
http://1drv.ms/1WVc0jS

Full lock to the right - driver side
http://1drv.ms/1WVc8zJ

I did a quick measurement of roughly 16" +/- 1/8" from the center of the heim joint (subframe side) to the end of the lca. Also, my wheels do not rub the front of the fender. Before I start taking this all apart again, I am curious what others with similar configurations might be doing.

Inputs appreciated, thanks in advance.

08-27-2015, 02:21 PM	#1
zac971 Join Date: Nov 2010 Location: Fargo, ND Posts: 43 Trader Rating: (0) Feedback Score: 0 reviews	Geomaster knuckle(sandwich) Zilvia, Looking for a little feedback. I'm running a geomaster front knuckle on an s14 and I'm not convinced that I've got the full potential out to them. I am thinking that my lca is extended a little too long. The tension rods fits to a point, but I think this is causing a little too much caster and an early lock-out on the control arm: Full lock to the left - driver side http://1drv.ms/1WVc0jS Full lock to the right - driver side http://1drv.ms/1WVc8zJ I did a quick measurement of roughly 16" +/- 1/8" from the center of the heim joint (subframe side) to the end of the lca. Also, my wheels do not rub the front of the fender. Before I start taking this all apart again, I am curious what others with similar configurations might be doing. Inputs appreciated, thanks in advance. __________________ "If you can't fix it with a hammer, you've got an electrical problem"