Help replacing BJ in S14 FLCA! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Gamepro56 · 10-04-2014, 09:34 PM

So I'm replacing the Balljoints in all of the control arms. I got the rear off easy but I ran into a lot of trouble replacing the fronts. I used heat (which made the rear ones come off like magic but It didn't really help in the front. The actual ball came out FML. My friend suggested I cut it but the blade on my dremel was a little too big to finish the job. Any ideas?

10-04-2014, 09:34 PM	#1
Gamepro56 Leaky Injector Join Date: Jan 2014 Location: FL Posts: 142 Trader Rating: (2) Feedback Score: 2 reviews	Help replacing BJ in S14 FLCA! So I'm replacing the Balljoints in all of the control arms. I got the rear off easy but I ran into a lot of trouble replacing the fronts. I used heat (which made the rear ones come off like magic but It didn't really help in the front. The actual ball came out FML. My friend suggested I cut it but the blade on my dremel was a little too big to finish the job. Any ideas?