Rb25det to s14 M63 plug wiring help!

[CharCharXD]

Everyones saying this wiring is cake no no no I understand that the KA engine harness has a f3 plug which is the same as the rb25det m63 plug but with different pin locations. Ive been referring to the diagrams in Sileighty_85's "Project RB (How To)" thread. Pictures are kind of blurry and I can only use some information on those diagrams because of this.

I found another guide that shows how to wire the rb25det M63 to the 200sx s14 f4 plug (sr20det). This guide is found here. I also found a guide that helps you figure out how to refer to the sr20det f4 plug to find to orientation on the Ka f3 plug. ---> Here

So what I have in front of me is an rb25det series 1 harness and a 97 ka24de harness. Both guides say to cut off the ka/sr f3 plug. But this guide says towards the end that all you have to do is repin the M63 plug. So does that mean I dont use the Ka f3 plug or?? Which plug do I use? The Ka f3 or the rb m63? I know that I have to take some pins from the ecu and put them into the f3 plug. I cant find any clear resolution pinouts for the rb25det m63 plug.

I'm kind of lost right now guys! All these wires are overwhelming me. Maybe I'm over thinking it but I just need some help. Please! Thanks guys. lol