Subframe Bushing Install Problem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SuperBlackS14 · 02-28-2012, 08:08 PM

It's easier if the walls buckle... Which, unless you've removed some rubber, probably won't happen. I was able to knock it out using the method I described, but you probably couldn't have used the sleeve over again... I skipped the cutting cuz it took too much time, then again, my subframe was bare because I did all the bushings, and it was easier to finagle empty obviously... Sorry you're not having the same luck.

02-28-2012, 08:08 PM	#30
SuperBlackS14 Zilvia Junkie Join Date: Sep 2011 Location: Albany, NY Age: 33 Posts: 381 Trader Rating: (4) Feedback Score: 4 reviews	It's easier if the walls buckle... Which, unless you've removed some rubber, probably won't happen. I was able to knock it out using the method I described, but you probably couldn't have used the sleeve over again... I skipped the cutting cuz it took too much time, then again, my subframe was bare because I did all the bushings, and it was easier to finagle empty obviously... Sorry you're not having the same luck. __________________ "Power Is Nothing Without Control"