Catch Can run to Exhaust - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

wileymotorsports · 12-24-2011, 03:07 PM

I was searching different ways to route the catch can and came across some guys running one line to their exhaust instead of the intake tube. I would rather route the catch can into the exhaust then back into the intake. So I made a super advanced drawing of what I would like to do. Will this work? The "T" fitting on the left side is replace with a 90 Degree elbow then routed to the catch can, the PCV will tee into that line and the crank breather line will tee into the line from the catch can to the exhaust.

Sr20det catch can.png

12-24-2011, 03:07 PM	#1
wileymotorsports Join Date: Dec 2011 Location: Arizona Age: 35 Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	Catch Can run to Exhaust I was searching different ways to route the catch can and came across some guys running one line to their exhaust instead of the intake tube. I would rather route the catch can into the exhaust then back into the intake. So I made a super advanced drawing of what I would like to do. Will this work? The "T" fitting on the left side is replace with a 90 Degree elbow then routed to the catch can, the PCV will tee into that line and the crank breather line will tee into the line from the catch can to the exhaust. Sr20det catch can.png