KY KA-T engine and setup complete - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

andyv316 · 07-03-2011, 09:06 AM

Engine mods:
Rebuilt KA
new main and rod bearings
balanced rotating assembly
CP pistons .20 over
Eagle rods
Built head
Virrea Valves
JWT 272 cams with adjustable cam gears
BC titanium springs and retainers
Just pulled the head on it to find out what caused a lost in compression on one and two. Turns out the people that built the head didnt put the right shims on the intake valves causing them to tape the pistons. I took the head to a machine shop to check everything, no bent valves. So in other words it needs to be re shimmed with the right timing and should be good.

Turbo Kit:
JGS log manifold
rb t28 turbo
550 injectors
z32 maf
Tomei fpr
walbro 255
FMIC
BRand new HKS BOV

Drive-train:
Fidanza lightwieght flywheel
Spec stage 3 6 pluck
Short throw
tranny is bad, no 5th nor reverse, but will include a good one

Tuning:
Full Nistune with license and cables
type 4 board

Asking
enigne---1500 because of what is listed above
turbo kit---1200 shipped without nistune
nistune----500 shipped with cables and license to tune it with

OBO

07-03-2011, 09:06 AM	#1
andyv316 Zilvia Member Join Date: Feb 2008 Location: ky Age: 35 Posts: 227 Trader Rating: (6) Feedback Score: 6 reviews	KA-T engine and setup complete Engine mods: Rebuilt KA new main and rod bearings balanced rotating assembly CP pistons .20 over Eagle rods Built head Virrea Valves JWT 272 cams with adjustable cam gears BC titanium springs and retainers Just pulled the head on it to find out what caused a lost in compression on one and two. Turns out the people that built the head didnt put the right shims on the intake valves causing them to tape the pistons. I took the head to a machine shop to check everything, no bent valves. So in other words it needs to be re shimmed with the right timing and should be good. Turbo Kit: JGS log manifold rb t28 turbo 550 injectors z32 maf Tomei fpr walbro 255 FMIC BRand new HKS BOV Drive-train: Fidanza lightwieght flywheel Spec stage 3 6 pluck Short throw tranny is bad, no 5th nor reverse, but will include a good one Tuning: Full Nistune with license and cables type 4 board Asking enigne---1500 because of what is listed above turbo kit---1200 shipped without nistune nistune----500 shipped with cables and license to tune it with OBO Last edited by andyv316; 07-03-2011 at 09:55 AM..