![]() |
|
Builds (and builds only) Got a build thread? It goes here, build threads anywhere else on the forum will be locked and never moved. |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Zilvia Member
![]() |
NJ RB25 240sx Build up...
Wassup guys been on here for a while figured i'd share my Rb25 build...
Ok so i have a S13 Hatch that's being built for Time Attack/Drag and some Autox... The original plan was to build a KA but i've been through my share so i figured i'd go a diff route... " Motor Swap " thought about and chose the Rb... Ok now to so Pics... How the car sat with the KA still in... ![]() Untitled by 89jdm240sx, on Flickr I brought a daily so now it was time to get cracking... Pulling out the Old faithful... ![]() Untitled by 89jdm240sx, on Flickr The next week i got cracking on stripping and cleaning the bay for paint... ![]() Untitled by 89jdm240sx, on Flickr After grinding and sanding here's the final result of the bay... ( Rustoleum Metallic ) ![]() Untitled by 89jdm240sx, on Flickr ![]() Untitled by 89jdm240sx, on Flickr With the bay finished for now i turn my focus to the inside of the car... Doing a little weight reduction... ![]() Untitled by 89jdm240sx, on Flickr ![]() Untitled by 89jdm240sx, on Flickr Sound deading removal... ![]() Untitled by 89jdm240sx, on Flickr Since i had to move the from my driveway i took it to my shop for some lift time... ![]() Untitled by 89jdm240sx, on Flickr ![]() Untitled by 89jdm240sx, on Flickr Next i started stripping off all the undercoat for chassis welding and repaint... ![]() Untitled by 89jdm240sx, on Flickr Motor specs: Rb25det Series 2 The goal is to make the most power possible without a stroker kit... the Block was bored .40 over hot tanked, honed, Crank knife edged ( stock) I ordered my pistons and Rods... Mahle Pistons .40 and Manley Turbo Tuff Rods and ACL bearings... ![]() Untitled by 89jdm240sx, on Flickr Ordered Greddy Intake Mani... ![]() Untitled by 89jdm240sx, on Flickr ![]() Untitled by 89jdm240sx, on Flickr The Head: ![]() Untitled by 89jdm240sx, on Flickr The head recieved a full race port n polish and angle job... All parts for the head are Tomei Tomei Oil galley Orifice 1.5 Tomei In/Ex Valves Tomei Dual valve springs Tomei Poncams 265 Tomei valve guides Will have pics soon R33 Diff i picked up: ![]() Untitled by 89jdm240sx, on Flickr Got the block back from Machine shop... ![]() Untitled by 89jdm240sx, on Flickr I got my valve covers and brakes powdercoated... R32 GTR brakes ![]() Untitled by 89jdm240sx, on Flickr Greddy Mani after port n Polish... ![]() Untitled by 89jdm240sx, on Flickr ![]() Untitled by 89jdm240sx, on Flickr Other parts i have brought: 5 lug conversion Wiring specialities harness N1 waterpump N1 Oil pump with spool gear Cometic Head gasket Full OEM gaskit kit Skyo Mount kit Have a lot of work at my shop will get more pics up later... ![]() Untitled by 89jdm240sx, on Flickr
__________________
Boost makes me sooooooo happy! |
![]() |
![]() |
Sponsored Links |
![]() |
Bookmarks |
|
|