TrustS13 hatch build - Kouki 180sx edition

[TrustS13]

What's up Zilvia. Danny here.

I had a complete build of my old S13 coupe on Zilvia.



You can read that here if you'd like: http://zilvia.net/f/chat/365793-trus...ld-thread.html

This thread kinda starts at the end, but I am going to try and show what I did document on this one. I didn't document nearly as well as my coupe, mainly because I didn't have a camera to do so with (minus my iPhone). I documented the last one with my brothers D40. I now have a decent camera myself so expect better pics!

So let's begin the story of my new hatch. I picked it up off a fellow out in Concord for a good deal. Came as a bare shell. No engine, trans, seats, but it had an uncracked dash and was a DOHC power model. It did turn out to have rust, but I got that cleared up.



Steam cleaned the bay
New parts - ISIS suspension package (Thanks BG @ EnjukuRacing.com)
SS 1 piece clutch line
88 Rotors 5 lug rotors + new pads

5 lug conversion hubs
New heart - S14 SR20DET + Wiring Specialties Plug-n-Play harness





Let's get to work!





You can see the rust spot on the driver side quarter. Turns out the whole entire quarter panel had been replaced and it had bondo rusted through. Luckily paint and body cleaned this up..

Prepped and painted the engine bay


In goes the SR


Skip a bunch of other stuff. Had a bunch of little issues come up here and there (with my clutch). Got that sorted out, got the car painted, got rid of the p45r's, got a BN type 2 body kit, got a decent camera (Rebel T3i) and here we go:


after I installed the D2's

Drift car rake


Painted

New wheels:


and blam


Got my new camera: (low quality facebook uploads for now)








So here's where I am now.. I need a diff, and all new aero. I sold the BN type 2 kit and am going full 180sx kouki aero. I am about to source a bumper and side skirts.. Anyone want to help? I have my OEM rear, and just bought 3 piece valences. Also need to source a Kouki wing. Thanks for checking my car out.

Parts List I can think of so far

- 1991 Nissan 240SX Shell
- ISIS Suspension Package
- ISIS Pulley package
- CX Racing FMIC
- 3" turbo back exhaust
- 1 piece "Cobra" downpipe
- Aluminum radiator
- Spec Stage 3 6 puck clutch
- 5 lug conversion
- JDM Kouki tail lights
- BN Type 2 body kit
lots of other cool stuff

[andrew600]

looking really good! i have never been a fan of aero at all but it doesnt look bad.

[dreamin240sx]

Originally Posted by andrew600

looking really good! i have never been a fan of aero at all but it doesnt look bad.

i agree with this guy but still looks awesome

[Pinggg]

Looks good, can't wait to see it done.

[STL240SXDRIFT]

Don't get stuck this time dude...LOL

Jus joking...looks good!

What's on for the next build?

[MrFairlady]

Ok...I'm in.
Sucks doing it twice,but a "kouki'd 180sx" should be fun!

lets see some proper Aero for this model...though BN is nice too.
You seem to know where to get the bumper (chesapeake) But Lip will be tough to find unless Crimson's lip will work for you.

[TrustS13]

Nice!

I really would probably be fine with a Crimson lip, but we will see. Any tips on sides, hood, or turn signals. Did you get rid of your old hood for the KP hood? Also, I notice we are both in NC, but don't think we have met. I'm in Greensboro. I think I may have seen your car at the Wrong Fitment Crew meet years ago, but I could be wrong.

[KravingAKouki]

why would you go to a sohc shell? nice build keep it up

[MrFairlady]

Originally Posted by KravingAKouki

why would you go to a sohc shell?

No engine, trans, seats, but it had an uncracked dash and was a DOHC power model.

Did you get rid of your old hood for the KP hood? Also, I notice we are both in NC, but don't think we have met. I'm in Greensboro. I think I may have seen your car at the Wrong Fitment Crew meet years ago, but I could be wrong.

yUP...sold the Dmax.

My friend drove my car out to that Meet that day back when I was on Brota 17/18 P45's also and (funny you mention that)My car made a Sneek peek in a Mag too that i saw too.Wasn't Crazy "wrong Fitment" by any means but It was in Clean up mode at that Time.

Like the way your build is going and will def be tuning in.
I'd go for the "Koguchi Cut" Hood myself with stock SE spoiler:

everything else Full Kouki.

Classy!!!
can't go wrong with The Kouki spoiler of course.

Do your Thing man.....should turn out nicely either way.

[va240dude]

I've got a near perfect oem lip for you but you'll have to wait till I get back from Japan next year! Great build btw!

Fairlady I'll need to make the drive down and see your car as well if I'm in the area!

[Ka24Power]

Are those the 18x10 +20 Boost 2's up front?

[TrustS13]

They are 18x9.5 +20 Boost 2's all around!

[violak90]

frickin sweet!

[TrustS13]

I need to update this more often! Purchased 3 piece rear valences, sold the BN kit, Bought 2 RED BRIDE Vios III LowMax's with silver glitter backs, working on sourcing skirts and front bumper (lip is gonna be my death). In the mean time, buying a HKS adjustable wastegate for the stock t28, and about to get my valve cover/engine bits powder coated. Any ideas??

Here is a pic I took with my new camera of the hatch. Also dyed my carpet black with RIT dye, came out GREAT, but... my hands are black now, haha.

[S-Nation S13]

damn another nice car..loved the coupe more lol none the less both cars came out beautiful.

[ncspotlight]

never fails man you always build awesome cars!!!

[yomisiu]

damn thats good lookin

[mwes24]

What type of wheels are those?

[blksylv]

Originally Posted by mwes24

What type of wheels are those?

Originally Posted by TrustS13

They are 18x9.5 +20 Boost 2's all around!

this..msglngth

[riprodder]

Your Boost 2's are Freaking Sweet!!!!! I just wished they made them in 17's. I would get a set too. And by the way, the white looks really nice up against your black car. Nice build!

[TrustS13]

Thanks.. Here is a new pic. Seats are installed:



New MOMO Mod 78 wheel - 350mm. Love this thing.

I also have now in my possession some OEM Kouki 3 piece rear valences.. I really need to source a front bumper and some skirts. Suggestions?

[kyles1988]

I feel like Matt (va240dude) has some Kouki skirts

[MrFairlady]

nissanofchesapeake
For the Bumper Sir. Super Cheap Shipped

[Pinggg]

It's always fun trying to keep red seats clean, haha bump for you man. Can't wait to see it with all the type x stuff.

[va240dude]

Looking clean man! How do you like those vios'? I cant decide between those or Zetas. Oh and I have two different sets of Kouki skirts in great shape available in Richmond VA.

[TrustS13]

I am liking them a lot! They are a big snug on me. I wouldn't get them if you are over 32 waist. I am 5'9 180lbs with a 32 waist but I have pretty broad shoulders (I weight train) and they almost stick out past the shoulder pads. Might have to get a picture for reference.

Please PM me a price on those skirts! Richmond isn't too far from me, well.. 4 hours I think.

[taran!]

Do you have a picture of the car with a regular bumper on, and not your kit? i want to see how low you are up front with the 18's.

[TrustS13]

I don't, I sold the OEM bumper when I got the shell.

[taran!]

Originally Posted by TrustS13

I don't, I sold the OEM bumper when I got the shell.

Guess ill just have to wait till your type x! Darn

[s13silvia_R]

The car is looking good, glad you are going full Type X.
Are you planning to run the Type X wing?