IL RB, Apex'i, DAFT - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BspeedIL82 · 06-15-2014, 05:10 PM

I have finally started upgrading my RB setup. In doing so, I no longer need the following:

CXRacing RB25 FMIC Piping kit (for Greddy style/Q45 TB setup). This has a SSQV1 blow off valve with it. Comes with clamps and necessary hardware $old

24x12x4 FMIC. Has 3" end tanks. Supports 550 hp. Put 5k miles on it. $150

RB25 S1 turbo. Good turbo. Pulls strong. $175

RB25 S2 turbo. Has shaft play. No Wastegate. $75

Syko 1 pc elbow/downpipe. Has bungs for stock o2 and wideband. Clears LHD steering rack with ease (I had the McKinney mounts). $old

RB25 S2 AFM. Pink label. $60

RB25 s2 engine harness. Wired for S13. Will need to extend the chassis power plugs (I had shortened them and located under the dash near the ECU). The 02 and MAF connections may need extended as well, to fit LHD setups. $275

RB25 factory intake manifold $50
RB25 factory Throttle body w TPS $75
RB25 factory turbo elbow $25
RB25 factory exhaust manifold $50
McKinney engine/trans OEM style mounts with hardware $25 each pair
Daft Innovations sway bar spacers $50

I also have an Apex'i PFC with controller. It currently needs some repair, as the ECCS part of the board shorted out. Am waiting on Apexi to send me the RMA information to have it repaired. Would be willing to let go of it if someone was interested.

Thanks for looking.

xARxxImPoRtx · 06-15-2014, 08:48 PM

How much for the PFC with boost control kit thanks

Nateline · 06-16-2014, 12:14 AM

I'd be interested in PFC, maybe... Pm me

BspeedIL82 · 06-16-2014, 04:35 AM

PMs have been sent ^^

RBPOWERED240 · 06-17-2014, 12:22 AM

Bump for this guy, GLWS Bro

mosmboost · 06-17-2014, 05:23 PM

I'll take the elbow 20$

RSD
Shoot First Media

RB25GUY · 06-17-2014, 05:38 PM

do you have the hand commander if so is it a FCC NT? i have a brand new FCC3 NT reason im asking is bc the one i have isnt compitable with my first gen pfc!

BspeedIL82 · 06-17-2014, 06:37 PM

Quote:

Originally Posted by RB25GUY

do you have the hand commander if so is it a FCC NT? i have a brand new FCC3 NT reason im asking is bc the one i have isnt compitable with my first gen pfc!

I would have to look at what version I have. But yes, I have the correct controller that goes with the PFC.

BspeedIL82 · 06-17-2014, 06:41 PM

Quote:

Originally Posted by mosmboost

I'll take the elbow 20$

Add shipping and that would work.

R34 GTT · 06-19-2014, 08:43 PM

Ill take that Front mount kit if still available?

BspeedIL82 · 10-11-2014, 09:42 AM

Items have been updated. Still have items available.

06-15-2014, 05:10 PM	#1
BspeedIL82 Zilvia Member Join Date: Jun 2009 Location: Bloomington, IL Age: 41 Posts: 186 Trader Rating: (4) Feedback Score: 4 reviews	RB, Apex'i, DAFT I have finally started upgrading my RB setup. In doing so, I no longer need the following: CXRacing RB25 FMIC Piping kit (for Greddy style/Q45 TB setup). This has a SSQV1 blow off valve with it. Comes with clamps and necessary hardware $old 24x12x4 FMIC. Has 3" end tanks. Supports 550 hp. Put 5k miles on it. $150 RB25 S1 turbo. Good turbo. Pulls strong. $175 RB25 S2 turbo. Has shaft play. No Wastegate. $75 Syko 1 pc elbow/downpipe. Has bungs for stock o2 and wideband. Clears LHD steering rack with ease (I had the McKinney mounts). $old RB25 S2 AFM. Pink label. $60 RB25 s2 engine harness. Wired for S13. Will need to extend the chassis power plugs (I had shortened them and located under the dash near the ECU). The 02 and MAF connections may need extended as well, to fit LHD setups. $275 RB25 factory intake manifold $50 RB25 factory Throttle body w TPS $75 RB25 factory turbo elbow $25 RB25 factory exhaust manifold $50 McKinney engine/trans OEM style mounts with hardware $25 each pair Daft Innovations sway bar spacers $50 I also have an Apex'i PFC with controller. It currently needs some repair, as the ECCS part of the board shorted out. Am waiting on Apexi to send me the RMA information to have it repaired. Would be willing to let go of it if someone was interested. Thanks for looking. Last edited by BspeedIL82; 10-11-2014 at 09:40 AM.. Reason: update for sold items

06-15-2014, 08:48 PM	#2
xARxxImPoRtx Leaky Injector Join Date: May 2014 Location: FT.Drum NY Age: 33 Posts: 58 Trader Rating: (1) Feedback Score: 1 reviews	How much for the PFC with boost control kit thanks

06-16-2014, 12:14 AM	#3
Nateline Leaky Injector Join Date: May 2014 Location: Victoria bc Age: 34 Posts: 77 Trader Rating: (1) Feedback Score: 1 reviews	I'd be interested in PFC, maybe... Pm me

06-16-2014, 04:35 AM	#4
BspeedIL82 Zilvia Member Join Date: Jun 2009 Location: Bloomington, IL Age: 41 Posts: 186 Trader Rating: (4) Feedback Score: 4 reviews	PMs have been sent ^^

06-17-2014, 12:22 AM	#5
RBPOWERED240 Zilvia FREAK! Join Date: Jun 2011 Location: WINDY CITY Age: 36 Posts: 1,527 Trader Rating: (38) Feedback Score: 38 reviews	Bump for this guy, GLWS Bro

06-17-2014, 05:23 PM	#6
mosmboost Join Date: Nov 2013 Location: Florida Age: 29 Posts: 25 Trader Rating: (1) Feedback Score: 1 reviews	I'll take the elbow 20$ RSD Shoot First Media

06-17-2014, 05:38 PM	#7
RB25GUY Nissanaholic! Join Date: Feb 2013 Location: NY Age: 35 Posts: 2,033 Trader Rating: (9) Feedback Score: 9 reviews	do you have the hand commander if so is it a FCC NT? i have a brand new FCC3 NT reason im asking is bc the one i have isnt compitable with my first gen pfc!

06-19-2014, 08:43 PM	#10
R34 GTT Join Date: Jun 2014 Location: Tampa, FL Age: 30 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	Ill take that Front mount kit if still available?

10-11-2014, 09:42 AM	#11
BspeedIL82 Zilvia Member Join Date: Jun 2009 Location: Bloomington, IL Age: 41 Posts: 186 Trader Rating: (4) Feedback Score: 4 reviews	Items have been updated. Still have items available.