ID S14 sr20det koni greddy aem z32 brakes 300zx turbo garrett

[Jfornachon]

Please read listing for updates. Prices are listed so please don't ask what I want for them. You can make a reasonable offer though. If it is not listed then I don't have it however I may find more parts later down the line. Please text/call me on my cell at 3one074077one6. These prices are NOT shipped unless we work a deal.

Engine parts:
$3600 S14 sr20det NA ecu, Wiring solutions Upper and Lower harness for s14 NA ECU into s13 chassis, ACT streetlight flywheel, and stage 1 clutch, Nismo thermostat, Circuit sports engine pullys, alt and ps pump, 8mo old water pump and Nismo thermostat, factory NA ecu, igniter, maf and FR sport inline fuel pressure gauge, S15 turbo Garrett (very lightly used maybe 1k miles if that much) W/SS lines(new). It will need to be reclocked. I will explain if interested) has not been installed on to motor, 97 g20 throttle body.
$400 Factory gasket kit minus v/c gasket NEW, Factory timing chain kit NEW, Factory Oil pump NEW

Suspension Parts:
$60 Circuit sports tension rods.

Electronic parts:
$1750 Aem 30-6600 standalone with patch harness pre wired with AEM map, o2, iat, Factory clutch switch (W/sensors and gauges) and MAC EBC not wired in yet.

Exhaust Parts
$100 greddy down pipe. Has scratches and a slight dent. Its small so I cant imagine that it really affects performance much if at all and Megan 3in test pipe
$60 New ps rack in the last year with new outer tie rods lines and resavor
$100 Greddy turbo outlet pipe/ o2 housing NEW

Brake Parts
$300 300xz brakes front calipers DIF SS lines and rotors. Iron calipers.
$300 300zx brakes Rear dif ss lines (w/parking brake cables, backing plates, and components included) Aluminum calipers.

Drivetrain Parts:
$300 Ichiba Hubs FT and RR w/extended arp speed tip studs 20 19mm aluminum lug nuts, extra spare studs.
$600 S15 Torsen HLSD with flanges. New side bearing were installed when installed into my car. About 5k on the bearings. Also comes with new pinion seal and new bearing.

Interior Parts:
$40 duel gauge pod mounted on steering column clam shell. Comes with upper and lower parts of clam shell.
$20 Sun visor aftermarket
$50 Autometer 3 gauge a pillar pod
$40 Both manual window regulators with cranks

Jared

[jtimcort]

is the dif fan controller still available? if so which model is it?

[Jfornachon]

Originally Posted by jtimcort

is the dif fan controller still available? if so which model is it?

Yes, it is. I don't know the exact model it is. I just know it operated both fans independently. Sorry for the late reply. I didn't get a notification. I have changed my settings. LMK.

Have a great day,
Jared

[Jfornachon]

I have lowered my prices.

Have a great day,
Jared

[lilbnort93]

damn im having trouble selling a complete s14 sr swap that's fully built for 3500 lol

[208s14.5]

willing to sell just the conversion lines for the z32 brakes? i can pick up.

[jtimcort]

I'll definitely take the fan controller off your hands. do you happen to have any install instructions? If not I am sure I can find them somewhere. Thank you.

[Jfornachon]

Originally Posted by jtimcort

I'll definitely take the fan controller off your hands. do you happen to have any install instructions? If not I am sure I can find them somewhere. Thank you.

You can find them online.

Have a great day,
Jared

[Jfornachon]

konis sold thank you.

Have a great day,
Jared

[CaliforniaMayhem]

Jared, are these aluminum or iron calipers? Also do you have the complete ebrake assembly with shroud?

Sent from my XT907 using Tapatalk

[Jfornachon]

Originally Posted by CaliforniaMayhem

Jared, are these aluminum or iron calipers? Also do you have the complete ebrake assembly with shroud?

Sent from my XT907 using Tapatalk

I am going to assume that you are only referring to the rears. I think they are iron but I will have to check before I can give you a accurate answer. Yes the ebrake assembly is complete.

Have a great day,
Jared

[Jfornachon]

Originally Posted by CaliforniaMayhem

Jared, are these aluminum or iron calipers? Also do you have the complete ebrake assembly with shroud?

Sent from my XT907 using Tapatalk

They are aluminum calipers.

Have a great day,
Jared

[Jfornachon]

Sold parts went out today. Thank you. Also updated caliper info.

Have a great day,
Jared

[Jfornachon]

UPDATED. Adjusted prices.

I will be driving from boise Id. to San Francisco to Los Angeles for Christmas and New Years. I can bring parts with me with a non refundable deposit. Let me know as I have to dig parts out of storage.

Have a great day,
Jared

[Jfornachon]

I will be leaving on Monday to head towards San Francisco. If you want parts let me know ASAP so I can dig them out of storage.

Have a great day,
Jared

[Jfornachon]

Adjusted prices.

Have a great day,
Jared

[Jfornachon]

Updated listing.

Have a great day,
Jared

[Jfornachon]

Removed sold items and added S15 diff.

Have a great day,
Jared

[looneys14]

Need the 300z parking breaks how much??


Sent from my iPhone using Tapatalk

[nextproject]

PM sent on the S15 HLSD.

[Backintoans13]

What all would be needed to install the s15 diff on an s13??


Sent from my iPhone using Tapatalk

[Jfornachon]

If you have a diff in your car then you have every thing that is needed. You remove your diff and install thins one. Then reinstall it into your car. Do a search on it. It is very easy if you know how to work on cars.

Have a great day,
Jared

[Jfornachon]

All parts are still for sale.

Have a great day,
Jared

[Jfornachon]

Parts still for sale.

Have a great day,
Jared

[wslugantz]

I would be interested in the s15 diff just let me know what your thinking on it

[Jfornachon]

It is out of the housing. It will come with the flanges and a new pinion seal and bearing. I am off tomorrow so I can take it to get a shipping quote. Lmk.

Have a great day,
Jared

[wslugantz]

Ok sounds good, just let me know

[Jfornachon]

Originally Posted by wslugantz

Ok sounds good, just let me know

I need you sexy in order to get a price.

Have a great day,
Jared

[wslugantz]

1059 s broadway
Lexington ky 40504

[wslugantz]

Originally Posted by Jfornachon

I need you sexy in order to get a price.

Have a great day,
Jared

I'm confused, don't know what your talking about