cluster issue please help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

S13cl9kid · 02-26-2012, 11:25 PM

ok here is the thing i pulled my gauge cluster out the other day to replace the plastic cover when i put everything back together and started the car the tach does not work the gas gauge went above full and the coolant temp does not read. all of this stuff was working before i pulled it out. i did notice that when i put the headlights on the gauge cluster flashes on and off. i checked all the fuses and all relays i think. i also put another gauge cluster in the car and it still does the same thing. i have even tried pulling the connectors out of the gauge cluster part way to see if that helped but it didnt. i really need someone to tell me what to check next

thanks

Sent from my PG86100 using Tapatalk

S13cl9kid · 02-28-2012, 02:01 AM

Anyone ????

Sent from my PG86100 using Tapatalk

S13cl9kid · 03-07-2012, 01:36 AM

Bump.need help

Sent from my PG86100 using Tapatalk

KiLLeR2001 · 03-07-2012, 11:32 AM

Sounds like you blew a fuse. Check all of your fuses under the kick panel.

S13cl9kid · 03-07-2012, 12:14 PM

I check all fuses and none are blown

Sent from my PG86100 using Tapatalk

S13cl9kid · 03-08-2012, 07:23 PM

So just change cluster new cluster hasness and TCU box

Sent from my PG86100 using Tapatalk

02-26-2012, 11:25 PM	#1
S13cl9kid Zilvia FREAK! Join Date: Nov 2007 Location: San Bernardino Age: 36 Posts: 1,275 Trader Rating: (9) Feedback Score: 9 reviews	cluster issue please help ok here is the thing i pulled my gauge cluster out the other day to replace the plastic cover when i put everything back together and started the car the tach does not work the gas gauge went above full and the coolant temp does not read. all of this stuff was working before i pulled it out. i did notice that when i put the headlights on the gauge cluster flashes on and off. i checked all the fuses and all relays i think. i also put another gauge cluster in the car and it still does the same thing. i have even tried pulling the connectors out of the gauge cluster part way to see if that helped but it didnt. i really need someone to tell me what to check next thanks Sent from my PG86100 using Tapatalk __________________ Last edited by S13cl9kid; 02-28-2012 at 02:01 AM..

02-28-2012, 02:01 AM	#2
S13cl9kid Zilvia FREAK! Join Date: Nov 2007 Location: San Bernardino Age: 36 Posts: 1,275 Trader Rating: (9) Feedback Score: 9 reviews	Anyone ???? Sent from my PG86100 using Tapatalk __________________

03-07-2012, 01:36 AM	#3
S13cl9kid Zilvia FREAK! Join Date: Nov 2007 Location: San Bernardino Age: 36 Posts: 1,275 Trader Rating: (9) Feedback Score: 9 reviews	Bump.need help Sent from my PG86100 using Tapatalk __________________

03-07-2012, 11:32 AM	#4
KiLLeR2001 Post Whore! Join Date: Jun 2007 Location: オーランドフロリダ Posts: 7,955 Trader Rating: (46) Feedback Score: 46 reviews	Sounds like you blew a fuse. Check all of your fuses under the kick panel. __________________

03-07-2012, 12:14 PM	#5
S13cl9kid Zilvia FREAK! Join Date: Nov 2007 Location: San Bernardino Age: 36 Posts: 1,275 Trader Rating: (9) Feedback Score: 9 reviews	I check all fuses and none are blown Sent from my PG86100 using Tapatalk __________________

03-08-2012, 07:23 PM	#6
S13cl9kid Zilvia FREAK! Join Date: Nov 2007 Location: San Bernardino Age: 36 Posts: 1,275 Trader Rating: (9) Feedback Score: 9 reviews	So just change cluster new cluster hasness and TCU box Sent from my PG86100 using Tapatalk __________________