CA 1995 240sx 5 speed clean title ! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jinesz32 · 03-06-2010, 08:48 PM

MOST RECENT PICTURE !

Up for sale / trade, 1995 Base model s14, Clean title.
POSSIBLE PART OUT.

I'm gonna tell you straight up what's wrong with it.

-The car is currently NOT running. The cams valves fell off and put in the
wrong order by someone ..It did start and ran, but the cams were hitting the
valves, I did not leave it running for a very long time, just enough to hear
what was going on, removed the front cover, valve cover etc, did alot of
measuring, put everything back together, and it's still hitting. so, this car is
gonna need some work, i have a spare head that has been rebuilt and a pair
of 91 cam's that can go with the car. This is the only reason why the car is
not running. The motor itself has about 10,000 miles, When taken apart due
to blown head gasket, I decided to just replace some parts with new parts,
Replaced Supertech pistons rings with new ones, new Clevite bearings rod,
and main. new OEM head gasket, and other MISC gaskets, intake etc. All this
car needs to be running is someone who knows how to adjust valves or bring
it to a machine shop.

-The heater core is currently busted, No heater or A/C.

other than that, i don't think anything is wrong with it.

INFO
the car has about 170,000 miles.
It used to be automatic, converted to 5 speed.
the MPH does work, s13 transmission with s14 speedsensor
i am the 4th owner of the vehicle.
it is a clean title.
it has a custom radio trim.
s14 5 lug conversion
has 5 spook rims
gold line springs (drops 2")
battle version adj tension rod
Q45 Front Brakes upgrade
AEM Short Ram intake with C.A.R.B
R&D Factory One Piece steel driveshaft
Stock Flywheel
Unknown Clutch
OPEN DIFF
Oil Changed every 3K Miles
HID low beams
"Q's"badges
18x7.5 Concept 5 all around, 245/40/18 all around, Dunlop up front and federals in the back bald. sprayed black.
Stock exhaust or i have a custom 2.5" cat-delete exhaust.

Bought / Not installed / Including
s14 OEM front bumper USED [black primer]. due to my gold bumper is chewed up on the driver side from zipties snapping. it was rubbing on tires.
s14 OEM front lip, cracked in the middle not all the way tru.

Removing
All 4 Speakers
Head unit

UPDATES
new 2010 tags.
5 lug conversion.
new brake pads.
alignment.
6000k HID, ONE new h4 bulbs.
5 speed shift trim/boot.
climate control switch.
wiper blades ;p
new OEM tie rod ends. will include inner[not installed]

BLOCK
-Engine was bore'd .20 over.
[RODS AND PISTONS AND CRANK ARE BALANCED]
-Supertech Pistons w/ rings, 9.1CR with .20
-Eagle Rods
-ARP Main Studs, Head Studs, Rod Bolts
-Clevite Main/Main Bearings
-OEM Headgasket with valvestem seals and valve cover gasket
-Mr. Gasket Copper Exhaust Gasket
-Cometic Full Engine Gasket Set

HEAD
-Basic rebuild to stock

MISC
new water pump
new oil pump
new thermo
new freeze plugs
new ngk spark plugs

it's a fresh motor motor basically.

My KA build thread
www.ka-t.org :: View topic - Jin's Gold S14 Built KA-T

PICTURES

OLD pics, interior still the same, no more gauges.

Engine

Album, some more pics
ImageShack Album - 11 images

Album, some pics at night
ImageShack Album - 15 images

ANYONE THAT IS INTERESTED, SERIOUS BUYER ONLY.

interested in trades of any kind let me know what you have, interested in cash, also possible might just part out.

email me [email protected]
or
text me is the easiest way. or you can try to call me if i dont answer please leave a message.

(eight zero five) 824-2867

or you can message me on zilvia.

Thanks, Jin.

limited240 · 03-06-2010, 10:55 PM

was that the rebuilt ka that got busted. . . ?

jinesz32 · 03-06-2010, 11:15 PM

what do you mean that got busted?

Slammed Assassin · 03-07-2010, 02:53 AM

hey jin sell me the driveshaft,aem intake,and maybe 5lug conv!!

sickstatus · 03-07-2010, 04:31 AM

nah man, if anything im taking those first ahaha.

limited240 · 03-07-2010, 06:04 AM

Quote:

Originally Posted by jinesz32

what do you mean that got busted?

I read your build thread of ur ka. Is this the same motor. Cause that would really suck.

sickstatus · 03-07-2010, 06:58 AM

its been rebuilt. didnt u read?

jinesz32 · 03-07-2010, 07:16 AM

Ohh, you mean the old motor, yes it's the same motor that was busted.

lost compression, probably headgasket or rings or something.

rebuilt it, which is what that whole rebuild thread was about.

block was bore'd out .20 over.

head was rebuilt.

all new parts installed.

so i don't understand how it can still be busted.

needa get this car outta here, no where to work on my car now..

@ tory and reggie

if i part out i'll give locals dibs. thats for sure.

s14-365 · 03-07-2010, 08:31 PM

ill give you $2 bucks

jinesz32 · 03-07-2010, 09:10 PM

sickstatus · 03-08-2010, 11:52 AM

Quote:

Originally Posted by s14-365

ill give you $2 bucks

rofllll.

JRwerks · 03-09-2010, 09:32 AM

ill give u $1000 for everything

sickstatus · 03-09-2010, 11:24 AM

jesse u low ballar. ahaha.

silverkouki · 03-09-2010, 12:00 PM

Hey didn't realize you were selling the whole car (I was looking at your old FS thread (here) , but If you do plan to part out, and nobody jumps on your S14 ABS driveshaft, I call dibs .... PM sent... lmk

sickstatus · 03-12-2010, 02:52 AM

damn this car is still not gone?

Slammed Assassin · 03-13-2010, 12:35 AM

ready for that part out yet jin?

imcunner · 03-14-2010, 11:06 PM

how much for the shell only? pm me

diomedes · 03-15-2010, 12:14 PM

Parting this bad boy out yet?

240sxvaj · 03-15-2010, 12:35 PM

Give us a start off price for the whole car. Or else i'll start one and its gonna be low.

slamn240 · 03-15-2010, 03:31 PM

how much for just the rolling shell?

jinesz32 · 03-17-2010, 08:19 AM

well if you're gonna offer one thats low, then i guess im gonna have to get it running then repost =]. closed.

03-06-2010, 08:48 PM	#1
jinesz32 Zilvia FREAK! Join Date: Jul 2007 Location: SOCAL Age: 34 Posts: 1,074 Trader Rating: (10) Feedback Score: 10 reviews	1995 240sx 5 speed clean title ! MOST RECENT PICTURE ! Up for sale / trade, 1995 Base model s14, Clean title. POSSIBLE PART OUT. I'm gonna tell you straight up what's wrong with it. -The car is currently NOT running. The cams valves fell off and put in the wrong order by someone ..It did start and ran, but the cams were hitting the valves, I did not leave it running for a very long time, just enough to hear what was going on, removed the front cover, valve cover etc, did alot of measuring, put everything back together, and it's still hitting. so, this car is gonna need some work, i have a spare head that has been rebuilt and a pair of 91 cam's that can go with the car. This is the only reason why the car is not running. The motor itself has about 10,000 miles, When taken apart due to blown head gasket, I decided to just replace some parts with new parts, Replaced Supertech pistons rings with new ones, new Clevite bearings rod, and main. new OEM head gasket, and other MISC gaskets, intake etc. All this car needs to be running is someone who knows how to adjust valves or bring it to a machine shop. -The heater core is currently busted, No heater or A/C. other than that, i don't think anything is wrong with it. INFO the car has about 170,000 miles. It used to be automatic, converted to 5 speed. the MPH does work, s13 transmission with s14 speedsensor i am the 4th owner of the vehicle. it is a clean title. it has a custom radio trim. s14 5 lug conversion has 5 spook rims gold line springs (drops 2") battle version adj tension rod Q45 Front Brakes upgrade AEM Short Ram intake with C.A.R.B R&D Factory One Piece steel driveshaft Stock Flywheel Unknown Clutch OPEN DIFF Oil Changed every 3K Miles HID low beams "Q's"badges 18x7.5 Concept 5 all around, 245/40/18 all around, Dunlop up front and federals in the back bald. sprayed black. Stock exhaust or i have a custom 2.5" cat-delete exhaust. Bought / Not installed / Including s14 OEM front bumper USED [black primer]. due to my gold bumper is chewed up on the driver side from zipties snapping. it was rubbing on tires. s14 OEM front lip, cracked in the middle not all the way tru. Removing All 4 Speakers Head unit UPDATES new 2010 tags. 5 lug conversion. new brake pads. alignment. 6000k HID, ONE new h4 bulbs. 5 speed shift trim/boot. climate control switch. wiper blades ;p new OEM tie rod ends. will include inner[not installed] BLOCK -Engine was bore'd .20 over. [RODS AND PISTONS AND CRANK ARE BALANCED] -Supertech Pistons w/ rings, 9.1CR with .20 -Eagle Rods -ARP Main Studs, Head Studs, Rod Bolts -Clevite Main/Main Bearings -OEM Headgasket with valvestem seals and valve cover gasket -Mr. Gasket Copper Exhaust Gasket -Cometic Full Engine Gasket Set HEAD -Basic rebuild to stock MISC new water pump new oil pump new thermo new freeze plugs new ngk spark plugs it's a fresh motor motor basically. My KA build thread www.ka-t.org :: View topic - Jin's Gold S14 Built KA-T PICTURES OLD pics, interior still the same, no more gauges. Engine Album, some more pics ImageShack Album - 11 images Album, some pics at night ImageShack Album - 15 images ANYONE THAT IS INTERESTED, SERIOUS BUYER ONLY. interested in trades of any kind let me know what you have, interested in cash, also possible might just part out. email me [email protected] or text me is the easiest way. or you can try to call me if i dont answer please leave a message. (eight zero five) 824-2867 or you can message me on zilvia. Thanks, Jin.

03-06-2010, 10:55 PM	#2
limited240 Zilvia Addict Join Date: Dec 2008 Location: cencal Posts: 896 Trader Rating: (11) Feedback Score: 11 reviews	was that the rebuilt ka that got busted. . . ? __________________

03-07-2010, 02:53 AM	#4
Slammed Assassin Nissanaholic! Join Date: Feb 2007 Location: Oxnard/SV Posts: 2,065 Trader Rating: (34) Feedback Score: 34 reviews	hey jin sell me the driveshaft,aem intake,and maybe 5lug conv!! __________________

03-07-2010, 04:31 AM	#5
sickstatus Zilvia FREAK! Join Date: Sep 2009 Location: SoCal Age: 33 Posts: 1,539 Trader Rating: (15) Feedback Score: 15 reviews	nah man, if anything im taking those first ahaha. __________________ straights are for fast cars, corners are for fast drivers.

03-07-2010, 06:58 AM	#7
sickstatus Zilvia FREAK! Join Date: Sep 2009 Location: SoCal Age: 33 Posts: 1,539 Trader Rating: (15) Feedback Score: 15 reviews	its been rebuilt. didnt u read? __________________ straights are for fast cars, corners are for fast drivers.

03-06-2010, 11:15 PM	#3
jinesz32 Zilvia FREAK! Join Date: Jul 2007 Location: SOCAL Age: 34 Posts: 1,074 Trader Rating: (10) Feedback Score: 10 reviews	what do you mean that got busted?

03-07-2010, 07:16 AM	#8
jinesz32 Zilvia FREAK! Join Date: Jul 2007 Location: SOCAL Age: 34 Posts: 1,074 Trader Rating: (10) Feedback Score: 10 reviews	Ohh, you mean the old motor, yes it's the same motor that was busted. lost compression, probably headgasket or rings or something. rebuilt it, which is what that whole rebuild thread was about. block was bore'd out .20 over. head was rebuilt. all new parts installed. so i don't understand how it can still be busted. needa get this car outta here, no where to work on my car now.. @ tory and reggie if i part out i'll give locals dibs. thats for sure.

03-07-2010, 08:31 PM	#9
s14-365 Zilvia Junkie Join Date: Sep 2009 Location: chino Posts: 519 Trader Rating: (3) Feedback Score: 3 reviews	ill give you $2 bucks

03-07-2010, 09:10 PM	#10
jinesz32 Zilvia FREAK! Join Date: Jul 2007 Location: SOCAL Age: 34 Posts: 1,074 Trader Rating: (10) Feedback Score: 10 reviews	ok

03-09-2010, 09:32 AM	#12
JRwerks Zilvia FREAK! Join Date: Mar 2007 Location: SOCAL Posts: 1,200 Trader Rating: (55) Feedback Score: 55 reviews	ill give u $1000 for everything

03-09-2010, 11:24 AM	#13
sickstatus Zilvia FREAK! Join Date: Sep 2009 Location: SoCal Age: 33 Posts: 1,539 Trader Rating: (15) Feedback Score: 15 reviews	jesse u low ballar. ahaha. __________________ straights are for fast cars, corners are for fast drivers.

03-09-2010, 12:00 PM	#14
silverkouki Leaky Injector Join Date: Mar 2007 Location: NJ Age: 38 Posts: 95 Trader Rating: (4) Feedback Score: 4 reviews	hey Hey didn't realize you were selling the whole car (I was looking at your old FS thread (here) , but If you do plan to part out, and nobody jumps on your S14 ABS driveshaft, I call dibs .... PM sent... lmk Last edited by silverkouki; 03-09-2010 at 10:24 PM..

03-12-2010, 02:52 AM	#15
sickstatus Zilvia FREAK! Join Date: Sep 2009 Location: SoCal Age: 33 Posts: 1,539 Trader Rating: (15) Feedback Score: 15 reviews	damn this car is still not gone? __________________ straights are for fast cars, corners are for fast drivers.

03-13-2010, 12:35 AM	#16
Slammed Assassin Nissanaholic! Join Date: Feb 2007 Location: Oxnard/SV Posts: 2,065 Trader Rating: (34) Feedback Score: 34 reviews	ready for that part out yet jin? __________________

03-14-2010, 11:06 PM	#17
imcunner Zilvia Junkie Join Date: Jan 2009 Location: :) Age: 35 Posts: 419 Trader Rating: (12) Feedback Score: 12 reviews	how much for the shell only? pm me

03-15-2010, 12:14 PM	#18
diomedes Zilvia Addict Join Date: Apr 2007 Location: Norcal Posts: 720 Trader Rating: (8) Feedback Score: 8 reviews	Parting this bad boy out yet?

03-15-2010, 12:35 PM	#19
240sxvaj Nissanaholic! Join Date: Dec 2007 Location: So-Cal! Age: 34 Posts: 2,192 Trader Rating: (38) Feedback Score: 38 reviews	Give us a start off price for the whole car. Or else i'll start one and its gonna be low.

03-15-2010, 03:31 PM	#20
slamn240 Zilvia Addict Join Date: Feb 2007 Location: SFV Age: 37 Posts: 856 Trader Rating: (23) Feedback Score: 23 reviews	how much for just the rolling shell?

03-17-2010, 08:19 AM	#21
jinesz32 Zilvia FREAK! Join Date: Jul 2007 Location: SOCAL Age: 34 Posts: 1,074 Trader Rating: (10) Feedback Score: 10 reviews	well if you're gonna offer one thats low, then i guess im gonna have to get it running then repost =]. closed.