WA FS: BNR34 Vspec Brembo, bolt onto any skylines and 240sx - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

C-unit · 12-04-2015, 01:32 PM

These brakes came off my 1999 Skyline GTR V-spec. I am upgrading so these are up for sale.

There are minor chips and i would get new stickers for them. They come with Project Mu front rotors. Pads has 80% left.

Front rotors are 324mm and rear rotors are 296mm. They will bolt onto any skyline and 240sx.

The brakes are still on my car right now and will be removed next week. They are located in Vancouver BC. I am willing to shipped and please check out the price below.

*note, I will not separate the package. It will have to go as a whole set up.

I am asking $1800USD OBO. shipping will be $100 across the states. I can also meet in blaine WA.

octanejockey · 12-04-2015, 01:50 PM

I'm assuming conversion lines are necessary to run these in a 240? And is there any chance that they'll clear 17" wheels? I have R33 17x9...

C-unit · 12-04-2015, 01:57 PM

I will give you all the lines needed since the bbk comes with its own line. Your r33 wheel will clear them no problem.

octanejockey · 12-04-2015, 02:08 PM

What size master cyl is needed?

octanejockey · 12-04-2015, 02:17 PM

And man that front caliper looks super close to your 18"... Can you shoot a pic of the gap?
Sorry if I'm a pita, I'm seriously contemplating this. I've already contacted GKTech to see if I can use the rear on their drop spindle assembly... It's getting serious, lol

rains14 · 12-04-2015, 03:19 PM

I need the rear ones for my GT-R

C-unit · 12-04-2015, 03:27 PM

Its running 17/16 bmc.

I can put a 17 wheel on it and show you the clearence. Will pm you this weekend.

Juan@Fontananissan · 12-04-2015, 03:41 PM

These brakes are rad, I have these on my Z32 with Endless MX-RS pads and i love them. they clear R33 wheels no problem, CRKai Ultimates and other wheels of the kind shouldn't be an issue. good luck with sale sir!

octanejockey · 12-04-2015, 03:45 PM

Rains14 - if you're serious about wanting the rears, this may work better for me... Would solve my current dilemma of wanting to run a dual caliper setup, as I'm sure finding another set of these would be a MF. PM me on what you think the rear setup is worth to you and maybe we can split the set.

rains14 · 12-04-2015, 06:21 PM

Quote:

Originally Posted by octanejockey

Rains14 - if you're serious about wanting the rears, this may work better for me... Would solve my current dilemma of wanting to run a dual caliper setup, as I'm sure finding another set of these would be a MF. PM me on what you think the rear setup is worth to you and maybe we can split the set.

Does anyone know if I have to do any work to get these to work on my R32 GTR?

GenkiZenki808 · 12-04-2015, 06:29 PM

Sweet set up. Wish I had the cash for these.

octanejockey · 12-04-2015, 07:05 PM

Plug and play for skyline and Silvia chassis

rains14 · 12-04-2015, 07:18 PM

What Pads and rotors are on the rear ?

C-unit · 12-04-2015, 07:30 PM

They are OEM rear. I forgot what pads. I will double check this weekend.

C-unit · 12-07-2015, 11:05 AM

Here is how the caliper sit with 17" wheel.

Kaifd3s · 12-07-2015, 01:44 PM

Dont you have to drill out the spindle for the bolts?

C-unit · 12-07-2015, 08:54 PM

No you dont have to. Only 350z/G35 will need the drilling.

C-unit · 12-10-2015, 12:07 AM

Bump bump bump

C-unit · 12-13-2015, 07:53 PM

Bump Bump Bump

12-04-2015, 01:32 PM	#1
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 39 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	FS: BNR34 Vspec Brembo, bolt onto any skylines and 240sx These brakes came off my 1999 Skyline GTR V-spec. I am upgrading so these are up for sale. There are minor chips and i would get new stickers for them. They come with Project Mu front rotors. Pads has 80% left. Front rotors are 324mm and rear rotors are 296mm. They will bolt onto any skyline and 240sx. The brakes are still on my car right now and will be removed next week. They are located in Vancouver BC. I am willing to shipped and please check out the price below. *note, I will not separate the package. It will have to go as a whole set up. I am asking $1800USD OBO. shipping will be $100 across the states. I can also meet in blaine WA.

12-04-2015, 03:41 PM	#8
Juan@Fontananissan Zilvia Member Join Date: Dec 2013 Location: Fontana, Ca Age: 34 Posts: 282 Trader Rating: (0) Feedback Score: 0 reviews	These brakes are rad, I have these on my Z32 with Endless MX-RS pads and i love them. they clear R33 wheels no problem, CRKai Ultimates and other wheels of the kind shouldn't be an issue. good luck with sale sir! __________________ Competition Engines & Dyno Tuning. (951)708-1648 \| [email protected]

12-07-2015, 01:44 PM	#16
Kaifd3s Zilvia Addict Join Date: Feb 2008 Location: Tamarac, Florida Age: 38 Posts: 694 Trader Rating: (16) Feedback Score: 16 reviews	Dont you have to drill out the spindle for the bolts? __________________

12-04-2015, 01:50 PM	#2
octanejockey Leaky Injector Join Date: Jul 2015 Location: Safety Harbor, FL Posts: 117 Trader Rating: (5) Feedback Score: 5 reviews	I'm assuming conversion lines are necessary to run these in a 240? And is there any chance that they'll clear 17" wheels? I have R33 17x9...

12-04-2015, 01:57 PM	#3
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 39 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	I will give you all the lines needed since the bbk comes with its own line. Your r33 wheel will clear them no problem.

12-04-2015, 02:08 PM	#4
octanejockey Leaky Injector Join Date: Jul 2015 Location: Safety Harbor, FL Posts: 117 Trader Rating: (5) Feedback Score: 5 reviews	What size master cyl is needed?

12-04-2015, 02:17 PM	#5
octanejockey Leaky Injector Join Date: Jul 2015 Location: Safety Harbor, FL Posts: 117 Trader Rating: (5) Feedback Score: 5 reviews	And man that front caliper looks super close to your 18"... Can you shoot a pic of the gap? Sorry if I'm a pita, I'm seriously contemplating this. I've already contacted GKTech to see if I can use the rear on their drop spindle assembly... It's getting serious, lol

12-04-2015, 03:19 PM	#6
rains14 Zilvia Addict Join Date: Dec 2007 Location: OC CA Posts: 704 Trader Rating: (6) Feedback Score: 6 reviews	I need the rear ones for my GT-R

12-04-2015, 03:27 PM	#7
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 39 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	Its running 17/16 bmc. I can put a 17 wheel on it and show you the clearence. Will pm you this weekend.

12-04-2015, 03:45 PM	#9
octanejockey Leaky Injector Join Date: Jul 2015 Location: Safety Harbor, FL Posts: 117 Trader Rating: (5) Feedback Score: 5 reviews	Rains14 - if you're serious about wanting the rears, this may work better for me... Would solve my current dilemma of wanting to run a dual caliper setup, as I'm sure finding another set of these would be a MF. PM me on what you think the rear setup is worth to you and maybe we can split the set.

12-04-2015, 06:29 PM	#11
GenkiZenki808 Zilvia Junkie Join Date: Jun 2012 Location: Hawaii Posts: 477 Trader Rating: (13) Feedback Score: 13 reviews	Sweet set up. Wish I had the cash for these.

12-04-2015, 07:05 PM	#12
octanejockey Leaky Injector Join Date: Jul 2015 Location: Safety Harbor, FL Posts: 117 Trader Rating: (5) Feedback Score: 5 reviews	Plug and play for skyline and Silvia chassis

12-04-2015, 07:18 PM	#13
rains14 Zilvia Addict Join Date: Dec 2007 Location: OC CA Posts: 704 Trader Rating: (6) Feedback Score: 6 reviews	What Pads and rotors are on the rear ?

12-04-2015, 07:30 PM	#14
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 39 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	They are OEM rear. I forgot what pads. I will double check this weekend.

12-07-2015, 11:05 AM	#15
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 39 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	Here is how the caliper sit with 17" wheel.

12-07-2015, 08:54 PM	#17
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 39 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	No you dont have to. Only 350z/G35 will need the drilling.

12-10-2015, 12:07 AM	#18
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 39 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	Bump bump bump

12-13-2015, 07:53 PM	#19
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 39 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	Bump Bump Bump