|
The injector wizard is a multiplier. VE is absolutely based on your injector data because of this. VE is a multiplied caluclation based on all sorts of information in your setup wizard. The numbers in each cell simply represent these mulitiplied caluclations in a predicted condition. Obviously different cams, compression, etc can change everything to a degree and that's why VE needs to be adjusted but you say you are doubling values because you input the wrong information which is absolutely the wrong way to go about it.
Don't worry about a discrepency in the injector manufacturer's info vs. the wizard. If your injectors are in the wizard (actual ID1000 NOT ID1050x) select them in the wizard. If you have ID1050x you will need to manually input the info from ID's website into the injector table since they are pretty different from ID1000.
Go back to ID1000 in the wizard and won't have to be doubling your values in the VE Table as a bandaid because the EMS thinks you're getting roughly half of the fuel you actually are...
|