S13 Sr into a S14

[yaba94070]

this is what im dealing with...
http://i145.photobucket.com/albums/r228/yaba94070/pic2-17.jpg
i spent the last day or two going through all my wirring and the last 4 - 5 hours looking for help on it with out asking for it... i found some good stuff and some help full sites but the more the merrier... so if any one has anything pics step by step process what ever you ahve... diagram anything please post it or let me know where i can get it. please make sure your links work before you post them because i have been through many link were they dn't work anymore. Thansk alot guy...

[jt1583]

http://mysite.verizon.net/nrgonline/s13sr_to_s14.htm

[yaba94070]

http://mysite.verizon.net/nrgonline/s13sr_to_s14.htm

final... thanks a lot man... i had ten diffrent sites all with a little info... i think that does the trick...
once again thanks a lot....

[homeslice]

wish i had that site when i had that trouble,good luck ;) i had to take mine to get worked on by rb-performance.net cause after 2 sets of wires it starts getting expensive!

[harangatang]

ya, thats the same site I used too!
Worked out just fine
I think I miss wired the igniter chip though.. that was my problem

[yaba94070]

wish i had that site when i had that trouble,good luck ;) i had to take mine to get worked on by rb-performance.net cause after 2 sets of wires it starts getting expensive!

i was about to take it to the guys that do the SR store just case i couldn't find shit for it really...

[yaba94070]

where did you guys get you rharness from???
some one told me go to
http://www.fjsports.com/
but the hole dam thing is in tawin or japanisse.. i dno i just cant read it... lol

[sTalnOut]

just wanted to ask if that site pin-out would it be the same for Auto to Manual ? cause im planning on taking my whole wiring and redoing it but don't know would it make a difference on the pin-out?

[Z U L8R]

mail me the harnesses

Dave @ Lethal Injection Motorsports (www.lethalinjectiontuning.com)

[yaba94070]

mail me the harnesses

Dave @ Lethal Injection Motorsports (www.lethalinjectiontuning.com) (http://www.lethalinjectiontuning.com))

????

i dn't get what your trying to say??

[jt1583]

I think he is offering to do it for you.
That site was my only resource for putting a CA into my S14. It works.
Also, as far as manual / auto ECU, the pinout will work for both.

Atleast CA-wise... I don't think it would be different for SR.

[ZX88]

http://www.frsport.com/sr20det-swap-engine-harness-wiring-guide-sr20-p-665.html

good write up not sure if its s13 to s13 or s14 though but they are similar enough

[Z U L8R]

if you would like your wiring done correctly pm me

Dave @ Lethal Injection Motorsports (www.lethalinjectiontuning.com)

[Steeles]

Lethal's good stuff. nice shop, everytime I think about it thoughi wanna put an RB in my 73 Z.... and the signature doesn't help that urge

[GSXRJJordan]

http://www.frsport.com/sr20det-swap-engine-harness-wiring-guide-sr20-p-665.html

good write up not sure if its s13 to s13 or s14 though but they are similar enough


This guide is for swapping an S13 SR motor into an S13 240SX chassis.

The original site posted is the best and only resource around for doing it, trust me, I've scoured everything. I believe Dave has fair pricing though, if you'd rather just mail it off :)

[Z U L8R]

thx fellas :D

Datsun + RB = teh sex :D

Dave =]