Rebuilt KA24DE Crank, but won't turn over -_- - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

solomonanfree · 12-02-2008, 05:47 PM

OKay i have a 1990 240sx HB and i just rebuilt a KA24DE with new supertech pistons,Eagle rods,valve job, BC stage 3 cams, With supertech valve and BC Springs. installed everything and checked all wires and fuses everything seems to be in order. The car Cranks and it gives spark and fuel, but it doesnt seem to turn over. Before installed it rotated smoothly. timing cams set up as the JWT way.

really learning as i go, really need some help.

If someone can give me some helpfull information it would be most appreciated ^^

Thank You

12-02-2008, 05:47 PM	#1
solomonanfree Leaky Injector Join Date: Jul 2005 Location: California, 562 Posts: 108 Trader Rating: (3) Feedback Score: 3 reviews	Rebuilt KA24DE Crank, but won't turn over -_- OKay i have a 1990 240sx HB and i just rebuilt a KA24DE with new supertech pistons,Eagle rods,valve job, BC stage 3 cams, With supertech valve and BC Springs. installed everything and checked all wires and fuses everything seems to be in order. The car Cranks and it gives spark and fuel, but it doesnt seem to turn over. Before installed it rotated smoothly. timing cams set up as the JWT way. really learning as i go, really need some help. If someone can give me some helpfull information it would be most appreciated ^^ Thank You __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode