I just made a discovery after a few hours of research and I think I might of found a solution to our problem so let me know what you guys think. I found something that already exists that could be used instead of having something fabricated or instead of searching for decades for the elusive authentic do-luck part. It is called a " linear shaft support with removable top" and a few companies carry them... some don't have the removable top and some even have hinged tops that swing open. Now, these come in different diameter sizes, in different height mounting sizes and in different materials (alum, stainless, etc.). I will inquire more with my actual setup but if you have a RXB brace, all you need is the diameter size of the brace and the height it sits above your trans tunnel and voila! I hope this helps some of you and I will let you all know how it fits once I order one and install it... I will not give company names due to obvious reasons but you can do a little more research and easily find out the rest!
|