CA RB25 OEM Parts Clearout - take a look! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

blakeZX · 01-03-2012, 10:32 PM

Hey guys-

Just wrapped up a turbo upgrade and have a lot of leftover OEM RB25 stuff that I took off. Obviously, everything for sale is known good and in excellent condition unless otherwise noted. Here's what I have:

RB25DET Stock Turbo - SOLD!
In immaculate condition, removed from a running motor that had less than 30K on it, never saw more than stock boost. The pictures really speak for themselves, this thing is CLEAN.

RB25DET -6AN Coolant Feed & Return Banjo Fittings for OEM turbo - SOLD!
Brand new, never used. Use these to run -6AN stainless braided coolant feed and return lines on your OEM turbo. Includes copper washers, and I have extra ones as well if you need them.

RB25DET Series II ECU - SOLD!
Marked with "G8" and P/N 23710-13U01. From a 5 speed R33 GTS-T.

RB25DET Series II E60 MAF - SOLD!

RB25DET Turbo Inlet Pipe with recirculation and breather lines - SOLD!

RB25DET OEM Crossover Pipe - $25
Includes OEM coupler that attaches it to the throttle body

RB25DET OEM Turbo Recirculation Valve - $25

RB25DET OEM Fuel Rail with 370cc Injectors - SOLD!

RB25DET OEM Fuel Pressure Regulator - $25 each
Have two, both in excellent working order.

RB25DET Series II OEM Injector Connectors - SOLD!
Someone might be looking for these, I dunno. Swapped them out for Denso plugs when I upgraded to bigger injectors.

RB25DET OEM Oil Cooler / Filter Block - SOLD!
Great condition, removed to install an aftermarket cooler.

1/8" BSPT to 1/8" NPT Oil Pressure Sensor Adapter - $12 shipped (via regular mail)
You need this to run your factory 1/8" BSPT oil pressure sensor in any standard 1/8" NPT aftermarket oil filter relocation or oil cooler block adapter. Useful if you want your 'idiot light' to remain functional as a backup to your aftermarket pressure gauge, or if you are not running an aftermarket gauge at all. This was hard to find.

RB25DET OEM Exhaust Cam Gear - $25

RB25DET/RB20DET OEM Flywheel Bolts x6 - $20
Excellent condition, I upgraded to an R32 RB26DETT flywheel which uses a different length bolt.

RB25DET Cometic Intake Collector Gasket - $15
Brand new never used. Made out of 0.60" thick Cometic "AFM" material, recommended when running more than stock boost. For OEM crossover style manifold.

RB25DET/RB20DET OEM turbo compressor elbow gasket 3-bolt (new) - SOLD!
RB25DET/RB20DET OEM turbo outlet gasket 6-bolt (new) - SOLD!
RB25DET/RB20DET OEM turbo outlet gasket 6-bolt (used 200 mi) - SOLD!

Took off the used outlet gasket after using it only a couple hundred miles, because I installed a new V-band turbo. Only has slight discoloration, it is the one pictured on the right. Don't have a picture of the new one, it is still in the packaging though. FRSport wants $30+tax and shipping for a new one! :|

RB25DET OEM turbo lock washers - SOLD!
Brand new still in the packaging.

RB25DET OEM misc turbo oil/coolant line stuff - $5 for any piece
Just some random turbo lines/stuff that I have left over. There is an oil feed hardline, a coolant feed hardline, half of the coolant return line (turbo side banjo fitting is cut off, rear section is there) and a used oil drain hose with clamps. Make me an offer for all of it? I switched to stainless braided lines.

RB25DET/VG30DE(TT) OEM Thermostat - $10
Works great, removed to install colder Nismo unit. Includes free Permatex thermostat housing gasket maker.

I am willing to ship any of this stuff, if you need a shipping quote I should be able to get you one within a couple days. I have a scale here and I just get quotes directly from the courier's website. I ship FedEx or USPS with tracking number provided the same day I ship. I ship everything from San Diego, 92101. Local pickup available.

I accept PayPal on the condition that you add the usual 3% of the total cost to cover fees.

Please post here or PM me with any questions. Thanks for looking!

S-Nation S13 · 01-03-2012, 10:48 PM

Free bump for you lol..

living4surf · 01-04-2012, 07:15 AM

$300 for the ecu injectors and maf shipped to 33458

blakeZX · 01-04-2012, 07:46 PM

Quote:

Originally Posted by living4surf

$300 for the ecu injectors and maf shipped to 33458

Sent you a PM. Also forgot to mention I have a really clean stock turbo, I saw you were looking for one. I will list it when I have pics of it.

blakeZX · 01-12-2012, 08:38 PM

Added OEM turbo, gaskets, lock washers, and some random lines to listing, see photos above. Thanks!

OutToWinPAHC · 01-18-2012, 04:54 PM

How much for just the oil pressure sender shipped?

rbeast · 01-19-2012, 08:49 PM

i need the turbo elbow gasket! the one with 6 bolt holes

trickey1991 · 01-19-2012, 10:08 PM

turbo looks unbelievably great man, great price too GLWS

swanney24 · 01-22-2012, 09:12 PM

you have just been pm'd

Detroit.Tee.Tee · 01-22-2012, 10:04 PM

Blake is a very honest guy. Great seller. Bump for you.

Bernie (NoVA) · 01-31-2012, 09:05 AM

Can you do a bit better on the injectors?

RVA Grassroots dub · 01-31-2012, 01:52 PM

still have that RB25DET OEM Oil Cooler / Filter Block?

blakeZX · 01-31-2012, 02:18 PM

Quote:

Originally Posted by RVA Grassroots dub

still have that RB25DET OEM Oil Cooler / Filter Block?

Yes I do! I updated the thread with everything that is sold, so if it has a price that means I've still got it.

WhipsGoneWild.net · 02-01-2012, 08:32 AM

ill take those injector connectors off your hand damn does that turbo look clean

ch1873857 · 02-01-2012, 08:53 AM

need slave cylinder
idle air control valve

i will take those injector clips for sure.

blakeZX · 02-01-2012, 07:34 PM

Quote:

Originally Posted by ch1873857

need slave cylinder
idle air control valve

i will take those injector clips for sure.

I don't have anything for sale apart from what is listed in my ads.. And the injector connectors are sold, sorry.

Bernie (NoVA) · 02-02-2012, 12:33 PM

Quote:

Originally Posted by ch1873857

need slave cylinder
idle air control valve

i will take those injector clips for sure.

If you need injector connectors - I have new and used ones available.
Sent you a PM.

Bernie (NoVA) · 02-02-2012, 12:34 PM

Quote:

Originally Posted by blakeZX

I don't have anything for sale apart from what is listed in my ads.. And the injector connectors are sold, sorry.

Sent you a PP for the injectors/rail. Thanks.

seeyas14 · 02-11-2012, 03:41 PM

hey do you still have the intake with lines?

Phats · 02-22-2012, 05:45 PM

Interested in the Stock Turbo. Still available?

whchua · 02-22-2012, 07:08 PM

i am interest in the banjo to an fitting, email me at [email protected]

elkaghar · 03-05-2012, 04:23 PM

Hello, i wanted to know can you ship the Crossover pipe up to Québec Canada, i'll pay the shipping i dont care, i need one!

Please answer quick gotta find one quick to finish m build!
Thanks!

blakeZX · 03-05-2012, 06:00 PM

Quote:

Originally Posted by elkaghar

Hello, i wanted to know can you ship the Crossover pipe up to Québec Canada, i'll pay the shipping i dont care, i need one!

Please answer quick gotta find one quick to finish m build!
Thanks!

That's not a problem, please PM me your postal code so we can figure out how much it will cost to get it to you. Thanks!

elkaghar · 03-06-2012, 03:04 PM

I'm new to this, don't know how to PM xD.

My postal code is G3E 1N8 (yes its letter + numbers here in canada haha)

Thanks a lot

sexcii-zenki · 04-15-2012, 08:50 PM

interested in flywheel bolts...will u do 20 shipped 07107?

ch1873857 · 04-16-2012, 06:20 AM

kinda old. anyway. you realise they are just KA24 flywheel bolts right?

sexcii-zenki · 04-16-2012, 06:28 AM

Quote:

Originally Posted by ch1873857

kinda old. anyway. you realise they are just KA24 flywheel bolts right?

Ka bolts are the same?

01-03-2012, 10:32 PM	#1
blakeZX Zilvia Junkie Join Date: Jun 2008 Location: Seattle, WA Age: 38 Posts: 412 Trader Rating: (16) Feedback Score: 16 reviews	RB25 OEM Parts Clearout - take a look! Hey guys- Just wrapped up a turbo upgrade and have a lot of leftover OEM RB25 stuff that I took off. Obviously, everything for sale is known good and in excellent condition unless otherwise noted. Here's what I have: RB25DET Stock Turbo - SOLD! In immaculate condition, removed from a running motor that had less than 30K on it, never saw more than stock boost. The pictures really speak for themselves, this thing is CLEAN. RB25DET -6AN Coolant Feed & Return Banjo Fittings for OEM turbo - SOLD! Brand new, never used. Use these to run -6AN stainless braided coolant feed and return lines on your OEM turbo. Includes copper washers, and I have extra ones as well if you need them. RB25DET Series II ECU - SOLD! Marked with "G8" and P/N 23710-13U01. From a 5 speed R33 GTS-T. RB25DET Series II E60 MAF - SOLD! RB25DET Turbo Inlet Pipe with recirculation and breather lines - SOLD! RB25DET OEM Crossover Pipe - $25 Includes OEM coupler that attaches it to the throttle body RB25DET OEM Turbo Recirculation Valve - $25 RB25DET OEM Fuel Rail with 370cc Injectors - SOLD! RB25DET OEM Fuel Pressure Regulator - $25 each Have two, both in excellent working order. RB25DET Series II OEM Injector Connectors - SOLD! Someone might be looking for these, I dunno. Swapped them out for Denso plugs when I upgraded to bigger injectors. RB25DET OEM Oil Cooler / Filter Block - SOLD! Great condition, removed to install an aftermarket cooler. 1/8" BSPT to 1/8" NPT Oil Pressure Sensor Adapter - $12 shipped (via regular mail) You need this to run your factory 1/8" BSPT oil pressure sensor in any standard 1/8" NPT aftermarket oil filter relocation or oil cooler block adapter. Useful if you want your 'idiot light' to remain functional as a backup to your aftermarket pressure gauge, or if you are not running an aftermarket gauge at all. This was hard to find. RB25DET OEM Exhaust Cam Gear - $25 RB25DET/RB20DET OEM Flywheel Bolts x6 - $20 Excellent condition, I upgraded to an R32 RB26DETT flywheel which uses a different length bolt. RB25DET Cometic Intake Collector Gasket - $15 Brand new never used. Made out of 0.60" thick Cometic "AFM" material, recommended when running more than stock boost. For OEM crossover style manifold. RB25DET/RB20DET OEM turbo compressor elbow gasket 3-bolt (new) - SOLD! RB25DET/RB20DET OEM turbo outlet gasket 6-bolt (new) - SOLD! RB25DET/RB20DET OEM turbo outlet gasket 6-bolt (used 200 mi) - SOLD! Took off the used outlet gasket after using it only a couple hundred miles, because I installed a new V-band turbo. Only has slight discoloration, it is the one pictured on the right. Don't have a picture of the new one, it is still in the packaging though. FRSport wants $30+tax and shipping for a new one! :\| RB25DET OEM turbo lock washers - SOLD! Brand new still in the packaging. RB25DET OEM misc turbo oil/coolant line stuff - $5 for any piece Just some random turbo lines/stuff that I have left over. There is an oil feed hardline, a coolant feed hardline, half of the coolant return line (turbo side banjo fitting is cut off, rear section is there) and a used oil drain hose with clamps. Make me an offer for all of it? I switched to stainless braided lines. RB25DET/VG30DE(TT) OEM Thermostat - $10 Works great, removed to install colder Nismo unit. Includes free Permatex thermostat housing gasket maker. I am willing to ship any of this stuff, if you need a shipping quote I should be able to get you one within a couple days. I have a scale here and I just get quotes directly from the courier's website. I ship FedEx or USPS with tracking number provided the same day I ship. I ship everything from San Diego, 92101. Local pickup available. I accept PayPal on the condition that you add the usual 3% of the total cost to cover fees. Please post here or PM me with any questions. Thanks for looking! __________________ -blakeZX \| 1997 240SX SE (RB25DET), 2008 350Z Nismo Edition (VQ35HR) Last edited by blakeZX; 02-26-2012 at 08:13 PM.. Reason: Sold some stuff

01-12-2012, 08:38 PM	#5
blakeZX Zilvia Junkie Join Date: Jun 2008 Location: Seattle, WA Age: 38 Posts: 412 Trader Rating: (16) Feedback Score: 16 reviews	Added OEM turbo, gaskets, lock washers, and some random lines to listing, see photos above. Thanks! __________________ -blakeZX \| 1997 240SX SE (RB25DET), 2008 350Z Nismo Edition (VQ35HR) Last edited by blakeZX; 01-12-2012 at 09:45 PM..

01-19-2012, 10:08 PM	#8
trickey1991 Zilvia Junkie Join Date: Oct 2011 Location: Kanada Age: 32 Posts: 518 Trader Rating: (2) Feedback Score: 2 reviews	turbo looks unbelievably great man, great price too GLWS __________________ 92' R32 GTS-T 355whp

01-31-2012, 09:05 AM	#11
Bernie (NoVA) Post Whore! Join Date: Jul 2003 Location: Alexandria VA Posts: 5,979 Trader Rating: (363) Feedback Score: 363 reviews	Can you do a bit better on the injectors? Last edited by Bernie (NoVA); 02-02-2012 at 12:35 PM..

02-01-2012, 08:32 AM	#14
WhipsGoneWild.net Zilvia Addict Join Date: Oct 2010 Location: PA Posts: 984 Trader Rating: (18) Feedback Score: 18 reviews	ill take those injector connectors off your hand damn does that turbo look clean __________________

01-03-2012, 10:48 PM	#2
S-Nation S13 Post Whore! Join Date: Jan 2008 Location: LAND of the LOST Posts: 4,083 Trader Rating: (92) Feedback Score: 92 reviews	Free bump for you lol..

01-04-2012, 07:15 AM	#3
living4surf Nissanaholic! Join Date: Apr 2008 Location: jupiter Age: 38 Posts: 1,701 Trader Rating: (52) Feedback Score: 52 reviews	$300 for the ecu injectors and maf shipped to 33458

01-18-2012, 04:54 PM	#6
OutToWinPAHC Zilvia Addict Join Date: May 2007 Location: Florida Posts: 746 Trader Rating: (6) Feedback Score: 6 reviews	How much for just the oil pressure sender shipped?

01-19-2012, 08:49 PM	#7
rbeast Leaky Injector Join Date: Nov 2011 Location: Jacksonville Age: 32 Posts: 142 Trader Rating: (6) Feedback Score: 6 reviews	i need the turbo elbow gasket! the one with 6 bolt holes

01-22-2012, 09:12 PM	#9
swanney24 Join Date: Jan 2012 Location: missouri Age: 33 Posts: 39 Trader Rating: (1) Feedback Score: 1 reviews	you have just been pm'd

01-22-2012, 10:04 PM	#10
Detroit.Tee.Tee Zilvia Junkie Join Date: Apr 2011 Location: Livonia, Michigan Age: 48 Posts: 324 Trader Rating: (10) Feedback Score: 10 reviews	Blake is a very honest guy. Great seller. Bump for you.

01-31-2012, 01:52 PM	#12
RVA Grassroots dub Leaky Injector Join Date: Dec 2011 Location: Richmond, VA Posts: 50 Trader Rating: (1) Feedback Score: 1 reviews	still have that RB25DET OEM Oil Cooler / Filter Block?

02-01-2012, 08:53 AM	#15
ch1873857 Nissanaholic! Join Date: Sep 2003 Location: Andrews Air Force Base Posts: 1,906 Trader Rating: (1) Feedback Score: 1 reviews	need slave cylinder idle air control valve i will take those injector clips for sure.

02-11-2012, 03:41 PM	#19
seeyas14 Join Date: Feb 2012 Location: medford Age: 32 Posts: 1 Trader Rating: (1) Feedback Score: 1 reviews	hey do you still have the intake with lines?

02-22-2012, 05:45 PM	#20
Phats Join Date: Jul 2005 Location: Grand Forks, ND Posts: 22 Trader Rating: (1) Feedback Score: 1 reviews	Interested in the Stock Turbo. Still available?

02-22-2012, 07:08 PM	#21
whchua Join Date: Apr 2009 Location: toledo oh Age: 43 Posts: 49 Trader Rating: (1) Feedback Score: 1 reviews	i am interest in the banjo to an fitting, email me at [email protected]

03-05-2012, 04:23 PM	#22
elkaghar Join Date: Mar 2012 Location: Quebec Age: 33 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	Hello, i wanted to know can you ship the Crossover pipe up to Québec Canada, i'll pay the shipping i dont care, i need one! Please answer quick gotta find one quick to finish m build! Thanks!

03-06-2012, 03:04 PM	#24
elkaghar Join Date: Mar 2012 Location: Quebec Age: 33 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	I'm new to this, don't know how to PM xD. My postal code is G3E 1N8 (yes its letter + numbers here in canada haha) Thanks a lot

04-15-2012, 08:50 PM	#25
sexcii-zenki Zilvia Junkie Join Date: May 2011 Location: neu joyzee Posts: 357 Trader Rating: (10) Feedback Score: 10 reviews	interested in flywheel bolts...will u do 20 shipped 07107?

04-16-2012, 06:20 AM	#26
ch1873857 Nissanaholic! Join Date: Sep 2003 Location: Andrews Air Force Base Posts: 1,906 Trader Rating: (1) Feedback Score: 1 reviews	kinda old. anyway. you realise they are just KA24 flywheel bolts right?