Anarchy Performance SR20DET Bug Eye WRX Build - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

anarchyperf · 03-01-2011, 11:11 PM

Anarchy Performance 02 WRX Drift Build

I recently got my hands on a 02 Subaru WRX with no engine or trans so I am going to do something a little different with it. I have been wanting to build a RWD WRX for a while so I'm going to make it happen. I just happen to have a spare SR20DET engine and trans laying around the garage so I'm going to drop it in.

Some of you are going to love this and other will choose to hate. This is for those of you who choose to hate.

Now why you ask?
1) I have a Subaru with no engine or trans and a spare SR20DET engine and trans laying around
2) The cost to build a Subaru engine and trans that can take the kind of beating drifting puts on a car is just ridiculous.
3) The SR20DET comes with a pretty solid trans and is cheap to replace. Maybe I'll drop in a Z32 trans down the road. We'll see what happens
4) How many 240sx's do you see out on the drift track? How many SR20DET swapped WRX's do you see running around? Nough Said

The way it sat the day I picked it up

Old Pics from a previous life

Progress Photos

I don't have any current photos but I assure you the engine sits much lower

Current Engine Configuration
SR20DET swap
Microtech LT-10s
Isis RS3871 Turbo
FiveO 750cc Injectors
Greddy Profec B spec 2 Boost Controller
Exedy Stage 2 Clutch Kit
Isis aluminum radiator
Isis silicone radiator hoses
Isis dual fans
Isis lightweight pulleys
Isis oil pan
Isis short shifter
Isis turbo outlet
Isis downpipe
Isis aluminum radiator shroud
Isis FMIC
Walbro 255 fuel pump
ssqv bov
Nismo Thermostat

ILoveMyRHS13 · 03-01-2011, 11:27 PM

I wanna come down and check this out sometime.

Good luck guys, it's going to be awesome when done.

HyperTek · 03-02-2011, 12:08 AM

pretty cool.

I think a rotary would have been cool too, low cg like suby motor, but less torque lol

no slide · 03-02-2011, 01:12 AM

I coulda swore I saw someone else start this thread. Cool none the less. I wanna see it slide

anarchyperf · 03-02-2011, 02:45 PM

Quote:

Originally Posted by no slide

I coulda swore I saw someone else start this thread. Cool none the less. I wanna see it slide

There is a SR20DET GC impreza build as well on this site

no slide · 03-02-2011, 03:13 PM

No I'm pretty sure it's the same car. Silver wrx with a Subaru sticker on the windshield and an sr with a gold valve cover

anarchyperf · 03-02-2011, 03:23 PM

Quote:

Originally Posted by no slide

No I'm pretty sure it's the same car. Silver wrx with a Subaru sticker on the windshield and an sr with a gold valve cover

It is on several other sites as well so maybe you've seen it there. If you come across it on here send me the link.

no slide · 03-05-2011, 03:04 PM

http://zilvia.net/f/off-topic-chat/3...hat-where.html

I hope I did that right. Thats the link

shiftdrift · 03-05-2011, 03:08 PM

i'm guessing that's his friend and those were just teaser pics.

anarchyperf · 03-06-2011, 01:01 AM

Quote:

Originally Posted by shiftdrift

i'm guessing that's his friend and those were just teaser pics.

Haha yeah... Didn't know he posted it on here though.

Modified Subaru crossmember bolts up. This is just a mock up

BustedS13 · 03-06-2011, 01:07 AM

this is boring/it would be better if it were this car with that engine with this body kit/not gonna happen/random negativity

oh wait, that's the other thread about the same car.

looking good!

angeldunk707 · 03-06-2011, 11:24 AM

nice work. i'm the guy with the sr20/GC. what are you going to do about your rearend? the power of the SR will snap your axles like no tomorrow. i'm currently designing a setup for my car where i can use the whole S13/14 rear subframe and since i'm making a custom tubular crossmember i will also be using all S14 tension rods, tie rods, spindles etc.

Good work. keep it up

*DALAZ_68* · 03-06-2011, 12:28 PM

i would figure a Z motor would have been a bit more intresting, stock 300hp NA...

but this is interesting too

anarchyperf · 03-06-2011, 12:36 PM

Quote:

Originally Posted by angeldunk707

nice work. i'm the guy with the sr20/GC. what are you going to do about your rearend? the power of the SR will snap your axles like no tomorrow. i'm currently designing a setup for my car where i can use the whole S13/14 rear subframe and since i'm making a custom tubular crossmember i will also be using all S14 tension rods, tie rods, spindles etc.

Good work. keep it up

Thanks man. I love that GC of yours.

Right now I'm doing a Frankenstein S13/WRX crossmember setup maintaining the WRX suspension and utilizing the s13 power steering rack. I am going tubular as well down the road and haven't determined weather or not I'm going to utilize the WRX or S13 Chassis components.

As for the rear I am planning on going tubular and using the R200 Diff and 240 axles as well.

anarchyperf · 03-06-2011, 12:41 PM

Quote:

Originally Posted by DALAZ_68

i would figure a Z motor would have been a bit more intresting, stock 300hp NA...

but this is interesting too

The WRX chassis's weight distribution is already horrible enough with the stock engine without dropping a heavier and more expensive 6cyl in there. I thought about doing a KA-T but I want to get the weight distribution as close to 50/50 as possible.

angeldunk707 · 03-06-2011, 12:59 PM

Quote:

Originally Posted by anarchyperf

Thanks man. I love that GC of yours.

Right now I'm doing a Frankenstein S13/WRX crossmember setup maintaining the WRX suspension and utilizing the s13 power steering rack. I am going tubular as well down the road and haven't determined weather or not I'm going to utilize the WRX or S13 Chassis components.

As for the rear I am planning on going tubular and using the R200 Diff and 240 axles as well.

yeah i thought it would be pretty damn cool to utilize the s14 chassis steering components on the GC the steering angle should be pretty damn impressive. good luck with your build. i'll be sure to check in every once in a while to see where its at. Mine is currently in paint thats why i havent updated in a while.

howyfeltersnatch · 03-06-2011, 10:16 PM

lol... heyy i didnt think you'd create a thread on here. dont ask why i didnt think you would...for some reason i actually thought you did work at your job haha

there's too much bs on the other anyway so im glad it got pushed a few pages back. oh wait you updated it like a tard

anarchyperf · 03-15-2011, 07:14 PM

S13 power steering rack

Need to move brackets back 1/2 inch to put power steering rack in stock location

Nissan Hard Body Pickup

conrad_s13.5 · 03-16-2011, 04:43 PM

fuck it,..sr everything

TheRealSy90 · 03-16-2011, 04:51 PM

That's what i've always said!

kiyoshi25 · 03-16-2011, 07:57 PM

I'm digging it, can't wait to see it evolve.

anarchyperf · 03-22-2011, 12:19 AM

The engine is now bolted in place under it's own will power without the help of a jack or engine hoist.

Agency Power Clutch Line

Need to lengthen tie rods yet but S13 power steering rack in place

angeldunk707 · 03-22-2011, 10:30 AM

nice work.

*exitspeed* · 03-22-2011, 10:39 AM

Small request...can you do a wagon instead?

lol

statickx991 · 03-22-2011, 10:50 AM

that is awesome, i wanted to do that when i had my suby

anarchyperf · 03-22-2011, 02:47 PM

Quote:

Originally Posted by exitspeed

Small request...can you do a wagon instead?

lol

Haha... Drift Wagon... I like it

tr4c3 · 03-22-2011, 02:55 PM

Cool idea but I think it's retarded to put an sr into it. Then again I wouldn't put an sr into a 240sx so that's just me.

no slide · 03-22-2011, 03:36 PM

Quote:

Originally Posted by exitspeed

Small request...can you do a wagon instead?

lol

^^^THIS! you just gave me an idea...

anarchyperf · 03-31-2011, 08:09 PM

Made a lot of progress over the last week

- Put wrx steering rack back in due to reverse steering from the 240
- Radiator mounts fabricated and s14 rad installed
- Modified steering linkage
- Routed intercooler piping. Currently using S14 intercooler.
- Wired in Microtech Standalone
- Installed custom driveshaft
- Stripped interior and removed sound deadening
- Started Engine for the first time since November

anarchyperf · 04-04-2011, 10:23 AM

Click me for startup video!

03-01-2011, 11:11 PM	#1
anarchyperf Zilvia Member Join Date: Dec 2010 Location: Nazareth, Pa Age: 39 Posts: 194 Trader Rating: (1) Feedback Score: 1 reviews	Anarchy Performance SR20DET Bug Eye WRX Build Anarchy Performance 02 WRX Drift Build I recently got my hands on a 02 Subaru WRX with no engine or trans so I am going to do something a little different with it. I have been wanting to build a RWD WRX for a while so I'm going to make it happen. I just happen to have a spare SR20DET engine and trans laying around the garage so I'm going to drop it in. Some of you are going to love this and other will choose to hate. This is for those of you who choose to hate. Now why you ask? 1) I have a Subaru with no engine or trans and a spare SR20DET engine and trans laying around 2) The cost to build a Subaru engine and trans that can take the kind of beating drifting puts on a car is just ridiculous. 3) The SR20DET comes with a pretty solid trans and is cheap to replace. Maybe I'll drop in a Z32 trans down the road. We'll see what happens 4) How many 240sx's do you see out on the drift track? How many SR20DET swapped WRX's do you see running around? Nough Said The way it sat the day I picked it up Old Pics from a previous life Progress Photos I don't have any current photos but I assure you the engine sits much lower Current Engine Configuration SR20DET swap Microtech LT-10s Isis RS3871 Turbo FiveO 750cc Injectors Greddy Profec B spec 2 Boost Controller Exedy Stage 2 Clutch Kit Isis aluminum radiator Isis silicone radiator hoses Isis dual fans Isis lightweight pulleys Isis oil pan Isis short shifter Isis turbo outlet Isis downpipe Isis aluminum radiator shroud Isis FMIC Walbro 255 fuel pump ssqv bov Nismo Thermostat __________________ www.anarchyperformance.com - Your source for 240sx Performance! https://www.facebook.com/anarchyperformance - Like us on facebook Email: [email protected]

03-02-2011, 12:08 AM	#3
HyperTek Post Whore! Join Date: Mar 2003 Location: Cali Posts: 13,224 Trader Rating: (3) Feedback Score: 3 reviews	pretty cool. I think a rotary would have been cool too, low cg like suby motor, but less torque lol __________________ Keep it Classy

03-05-2011, 03:08 PM	#9
shiftdrift Nissanaholic! Join Date: Nov 2009 Location: indiana Age: 33 Posts: 2,242 Trader Rating: (42) Feedback Score: 42 reviews	i'm guessing that's his friend and those were just teaser pics. __________________ SW Fab

03-06-2011, 01:07 AM	#11
BustedS13 Post Whore! Join Date: Jan 2004 Location: Phoenix AZ Age: 39 Posts: 10,287 Trader Rating: (0) Feedback Score: 0 reviews	this is boring/it would be better if it were this car with that engine with this body kit/not gonna happen/random negativity oh wait, that's the other thread about the same car. looking good! __________________

03-06-2011, 11:24 AM	#12
angeldunk707 Zilvia Member Join Date: Oct 2008 Location: S.F. Bay Area, CA Age: 34 Posts: 258 Trader Rating: (8) Feedback Score: 8 reviews	nice work. i'm the guy with the sr20/GC. what are you going to do about your rearend? the power of the SR will snap your axles like no tomorrow. i'm currently designing a setup for my car where i can use the whole S13/14 rear subframe and since i'm making a custom tubular crossmember i will also be using all S14 tension rods, tie rods, spindles etc. Good work. keep it up __________________ PowerPlenty RWD SR20DET/Impreza GC8 Build:http://imgur.com/a/7KDa1#0

03-02-2011, 01:12 AM	#4
no slide Zilvia Member Join Date: Mar 2007 Location: rancho Age: 41 Posts: 246 Trader Rating: (1) Feedback Score: 1 reviews	I coulda swore I saw someone else start this thread. Cool none the less. I wanna see it slide

03-02-2011, 03:13 PM	#6
no slide Zilvia Member Join Date: Mar 2007 Location: rancho Age: 41 Posts: 246 Trader Rating: (1) Feedback Score: 1 reviews	No I'm pretty sure it's the same car. Silver wrx with a Subaru sticker on the windshield and an sr with a gold valve cover

03-05-2011, 03:04 PM	#8
no slide Zilvia Member Join Date: Mar 2007 Location: rancho Age: 41 Posts: 246 Trader Rating: (1) Feedback Score: 1 reviews	http://zilvia.net/f/off-topic-chat/3...hat-where.html I hope I did that right. Thats the link

03-06-2011, 12:28 PM	#13
DALAZ_68 not giving a fuck Join Date: Apr 2007 Location: Los angeles Age: 37 Posts: 15,077 Trader Rating: (104) Feedback Score: 104 reviews	i would figure a Z motor would have been a bit more intresting, stock 300hp NA... but this is interesting too __________________ LOL 240... whats better than 1? 5 1's ...lol PSN & XBL GT : Wh0pp3r68 CLUB LEXUS : Wh0pp3r

03-06-2011, 10:16 PM	#17
howyfeltersnatch Leaky Injector Join Date: Sep 2010 Location: Easton, Pa Age: 38 Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	lol... heyy i didnt think you'd create a thread on here. dont ask why i didnt think you would...for some reason i actually thought you did work at your job haha there's too much bs on the other anyway so im glad it got pushed a few pages back. oh wait you updated it like a tard __________________

03-15-2011, 07:14 PM	#18
anarchyperf Zilvia Member Join Date: Dec 2010 Location: Nazareth, Pa Age: 39 Posts: 194 Trader Rating: (1) Feedback Score: 1 reviews	S13 power steering rack Need to move brackets back 1/2 inch to put power steering rack in stock location Nissan Hard Body Pickup __________________ www.anarchyperformance.com - Your source for 240sx Performance! https://www.facebook.com/anarchyperformance - Like us on facebook Email: [email protected]

03-16-2011, 04:43 PM	#19
conrad_s13.5 Zilvia FREAK! Join Date: Jan 2009 Location: STL Age: 36 Posts: 1,533 Trader Rating: (6) Feedback Score: 6 reviews	fuck it,..sr everything __________________ cONtRol FReAkS

03-16-2011, 07:57 PM	#21
kiyoshi25 Join Date: Oct 2010 Location: Kent, WA Posts: 22 Trader Rating: (5) Feedback Score: 5 reviews	I'm digging it, can't wait to see it evolve.

03-22-2011, 12:19 AM	#22
anarchyperf Zilvia Member Join Date: Dec 2010 Location: Nazareth, Pa Age: 39 Posts: 194 Trader Rating: (1) Feedback Score: 1 reviews	The engine is now bolted in place under it's own will power without the help of a jack or engine hoist. Agency Power Clutch Line Need to lengthen tie rods yet but S13 power steering rack in place __________________ www.anarchyperformance.com - Your source for 240sx Performance! https://www.facebook.com/anarchyperformance - Like us on facebook Email: [email protected]

03-22-2011, 10:30 AM	#23
angeldunk707 Zilvia Member Join Date: Oct 2008 Location: S.F. Bay Area, CA Age: 34 Posts: 258 Trader Rating: (8) Feedback Score: 8 reviews	nice work. __________________ PowerPlenty RWD SR20DET/Impreza GC8 Build:http://imgur.com/a/7KDa1#0

03-22-2011, 10:39 AM	#24
exitspeed aWingThing.com Join Date: Mar 2003 Location: Milwaukee, WI Age: 44 Posts: 20,900 Trader Rating: (1) Feedback Score: 1 reviews	Small request...can you do a wagon instead? lol __________________ What I do for a living...www.mhrussell.com

03-22-2011, 10:50 AM	#25
statickx991 Zilvia Member Join Date: Jan 2008 Location: Pa Posts: 210 Trader Rating: (0) Feedback Score: 0 reviews	that is awesome, i wanted to do that when i had my suby __________________ im a f18 bro

03-31-2011, 08:09 PM	#29
anarchyperf Zilvia Member Join Date: Dec 2010 Location: Nazareth, Pa Age: 39 Posts: 194 Trader Rating: (1) Feedback Score: 1 reviews	Made a lot of progress over the last week - Put wrx steering rack back in due to reverse steering from the 240 - Radiator mounts fabricated and s14 rad installed - Modified steering linkage - Routed intercooler piping. Currently using S14 intercooler. - Wired in Microtech Standalone - Installed custom driveshaft - Stripped interior and removed sound deadening - Started Engine for the first time since November __________________ www.anarchyperformance.com - Your source for 240sx Performance! https://www.facebook.com/anarchyperformance - Like us on facebook Email: [email protected]

04-04-2011, 10:23 AM	#30
anarchyperf Zilvia Member Join Date: Dec 2010 Location: Nazareth, Pa Age: 39 Posts: 194 Trader Rating: (1) Feedback Score: 1 reviews	Click me for startup video! __________________ www.anarchyperformance.com - Your source for 240sx Performance! https://www.facebook.com/anarchyperformance - Like us on facebook Email: [email protected]