MD 500+hp Built S13 SR Swap

[j-scrilla]

Well im done with this motor as i am going 2jz now so no need to finish this setup! Below is a list of the parts that i am selling with the swap and hopefully i can find a good home for these parts without getting raped by ppl on prices getting lowballed.. All Machine work done by AHM in Maryland and if anyone knows this shop is the best when it come to SR20 motors and the only machince shop that Mid Atlantic Motorsports uses...Looking to sell together but if i can sell the motor and trans i will part the rest out!!!!

Motor: S13 Sr20det Redtop
Bottom End: AHM MACHINE SHOP
-Eagle Rods with CP Pistons and all the things that go along with being built i.e. decking,honing,etc...ran this for about 400 miles before getting head built.
-Cosworth head gasket

Top End: AHM MACHINE SHOP
-Head stage II Port Job by AHM Machine Shop
-BC Valves, Valve Springs, Retainers, BC 264/264 Cams Jun Racing Cam gears and Supertech Seals with new oil galleys and journals. New EVERYTHING !!!completely cleaned and NEVER FIRED UP!
-Isis rocker arm stoppers with OEM NISSAN ROCKERS.
-2 Valve covers with Carbon fiber coilpack cover Cleaned by AHM

Transmission: (1)
-New OEM Throw out bearing as well as bearings inside trans
Transmission: (2) CONNECTED TO MOTOR
-Exedy stage II Clutch
-Lightened Flywheel

ASKING PRICE: $3500 for Motor+Trans(x2) Assembled WILL NOT SHIP

I KNOW IM FORGETTING SOMETHING BUT BELIEVE ME ITS ALL QUALITY AND I SPENT A TON FOR THE BOTTOM END AND HEAD NOT INCLUDING PARTS!!!! ON TO THE REST
-Enthalpy Tuned Ecu
-Enjuku racing 50 trim Turbo with Garret Internals (NEVER FIRED)
-Isis Top Mount Log Manifold (Mounted Never RAN)
-Tial 38mm Wastegate (Mounted Never Heated) AUTHENTIC!!!
-Isis Intake Manifold Polished
-Isis Oil Pan
-Greddy RS BOV (AUTHENTIC)
-Greddy FMIC (AUTHENTIC) With Cold side/Hot side piping but hot side needs to be cut and rewelded for the top mount setup
-Splitfire Coilpacks w/Amplifier
-Z32 MAF
-370cc Injectors
-Greddy EBC
-Carbon Fiber Cooling Plate for S14
-(x2) CAS
I know Im forgetting alot of shit probably like i said before but hey if its not listed just ask. call or text 202 341 8119 for prices on the rest of this stuff, and for the best and fastest response!

[Jybfan04]

I think some pics of the longblock itself would help with getting it sold!

[didderson]

Is that the band clamp style Tial wastegate?

[dreek93sr20]

is this engine still for sale??

[Pinggg]

Originally Posted by dreek93sr20

is this engine still for sale??

instead of bringing up a old thread, you should of pm the OP.

[igottas13]

pls pm for price of head w/out cams, very interested. thanks.

[BadazzSr20]

For the right price ill take the whole long block ill need a leak down test done and a conpression test as well




Just seen this isba year old lol ok nvm im sure its sold who was the smart guy to bring this back from the dead lol