RB25det GURUS HELP!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

MR_GUTTI · 03-15-2016, 01:59 PM

I have been searching for a while already with no luck. I'm building a rb25det neo. I'm reusing the stock piston. I know that this pistons head are different from rb26 and r33 rb25 but my questions is! Can I use r33 rb25det rings in the NEOs pistons? I already bought a set of r33s a few months back without knowing the r34 where "different". I was planning to use them anyways so I grind the rings to the correct gap and install on the piston (pistons are not install on the cylinder yet) everything seem to be fine but I don't want to mess it up! Have someone done this before.
Any advise is welcome
Thanks

03-15-2016, 01:59 PM	#1
MR_GUTTI Zilvia Junkie Join Date: Nov 2009 Location: Houston Posts: 324 Trader Rating: (9) Feedback Score: 9 reviews	RB25det GURUS HELP!! I have been searching for a while already with no luck. I'm building a rb25det neo. I'm reusing the stock piston. I know that this pistons head are different from rb26 and r33 rb25 but my questions is! Can I use r33 rb25det rings in the NEOs pistons? I already bought a set of r33s a few months back without knowing the r34 where "different". I was planning to use them anyways so I grind the rings to the correct gap and install on the piston (pistons are not install on the cylinder yet) everything seem to be fine but I don't want to mess it up! Have someone done this before. Any advise is welcome Thanks