Enjuku Racing - Pro-Am R32 Skyline Build - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Tank240sxT · 07-14-2014, 06:49 AM

So what is new with this project? Has a decision been made on what motor to go with?

Enjuku Racing · 07-16-2014, 02:27 PM

Hey guys sorry for the late response, I just got back on Sunday from the Third round of SWD at VIR and have been playing catch up on work and sleep.

We ended up going with a RB25 engine that we built the bottom end with CP pistons and Manley Rods. We also went with a Garrett GTX3071r turbo and had a RS Enthalpy Rom tune to run 110oct race gas. The car will be dyno'd this coming weekend to see where it is for power but the Rom tune was mailed into us as we didnt have enough time to get it on they dyno before the event.

Here is some pictures of the car from the event.

Over all the event went really well, I was able to qualify 13th in my First pro am event. But was knocked out in my first round by Sean Morgan. The car performed well but needs a few tweaks done before the next event and I personally need more seat time sliding a RHD car to get more comfortable and aggressive with it.

Ill check back in after this weekend after we Dyno the car and after I drive it again at this local event down in South Florida that I will be driving the car at Three Palms Speed way.

-Hachi

sleeper108 · 08-20-2014, 11:30 AM

are you guys using the ISIS KA radiator?

abcdefg123 · 08-20-2014, 11:38 AM

You selling the rb20 now?

Enjuku Racing · 08-20-2014, 02:39 PM

Hello,

Yes we were running the ISIS KA Radiator for S13 chassis.

also no sorry we are not selling the RB20 one of the employees will be using it for his S30.

geoffs13 · 11-06-2014, 08:34 AM

Those fiveO injectors actually any good? Was thinking about getting a set but a little iffy about it.

Enjuku Racing · 11-06-2014, 08:47 AM

FiveO injectors are great! We've ran them on many of our racecars here and a few of us here have them on our personal cars. We well a ton of them too.

Tank240sxT · 11-06-2014, 01:21 PM

They are good injectors as I had them on my KA-T project. RS Enthapy will also do tunes with these injectors. I would say if you need injectors these can be trusted.

geoffs13 · 11-06-2014, 03:19 PM

Sweet. Thanks fellas

07-16-2014, 02:27 PM	#32
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 40 Posts: 3,049 Trader Rating: (29) Feedback Score: 29 reviews	Hey guys sorry for the late response, I just got back on Sunday from the Third round of SWD at VIR and have been playing catch up on work and sleep. We ended up going with a RB25 engine that we built the bottom end with CP pistons and Manley Rods. We also went with a Garrett GTX3071r turbo and had a RS Enthalpy Rom tune to run 110oct race gas. The car will be dyno'd this coming weekend to see where it is for power but the Rom tune was mailed into us as we didnt have enough time to get it on they dyno before the event. Here is some pictures of the car from the event. Over all the event went really well, I was able to qualify 13th in my First pro am event. But was knocked out in my first round by Sean Morgan. The car performed well but needs a few tweaks done before the next event and I personally need more seat time sliding a RHD car to get more comfortable and aggressive with it. Ill check back in after this weekend after we Dyno the car and after I drive it again at this local event down in South Florida that I will be driving the car at Three Palms Speed way. -Hachi __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

08-20-2014, 02:39 PM	#35
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 40 Posts: 3,049 Trader Rating: (29) Feedback Score: 29 reviews	Hello, Yes we were running the ISIS KA Radiator for S13 chassis. also no sorry we are not selling the RB20 one of the employees will be using it for his S30. __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

11-06-2014, 08:34 AM	#36
geoffs13 Leaky Injector Join Date: Sep 2014 Location: georgia Age: 31 Posts: 92 Trader Rating: (5) Feedback Score: 5 reviews	Those fiveO injectors actually any good? Was thinking about getting a set but a little iffy about it. __________________

11-06-2014, 08:47 AM	#37
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 40 Posts: 3,049 Trader Rating: (29) Feedback Score: 29 reviews	FiveO injectors are great! We've ran them on many of our racecars here and a few of us here have them on our personal cars. We well a ton of them too. __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

11-06-2014, 03:19 PM	#39
geoffs13 Leaky Injector Join Date: Sep 2014 Location: georgia Age: 31 Posts: 92 Trader Rating: (5) Feedback Score: 5 reviews	Sweet. Thanks fellas __________________

07-14-2014, 06:49 AM	#31
Tank240sxT Join Date: Nov 2011 Location: Georgia Posts: 31 Trader Rating: (0) Feedback Score: 0 reviews	So what is new with this project? Has a decision been made on what motor to go with?

08-20-2014, 11:30 AM	#33
sleeper108 Zilvia Junkie Join Date: Dec 2008 Location: Albuquerque, NM Age: 34 Posts: 511 Trader Rating: (7) Feedback Score: 7 reviews	are you guys using the ISIS KA radiator?

08-20-2014, 11:38 AM	#34
abcdefg123 Leaky Injector Join Date: Aug 2014 Location: downtown Posts: 133 Trader Rating: (0) Feedback Score: 0 reviews	You selling the rb20 now?

11-06-2014, 01:21 PM	#38
Tank240sxT Join Date: Nov 2011 Location: Georgia Posts: 31 Trader Rating: (0) Feedback Score: 0 reviews	They are good injectors as I had them on my KA-T project. RS Enthapy will also do tunes with these injectors. I would say if you need injectors these can be trusted.