This is the interior thread

[wh0aitznic0]

Pink Slut just reminded me...

Do any of you bro's have pics of cageless harness mounting using either the RSTB or C Pillar bar for angle correction?

[Broadfield]

Originally Posted by living4surf

just throw a very thin layer of filler on there and sand it smooth and paint

Originally Posted by One_love_silvia

this is actually a pretty good idea. i might do it after i buy my new trim.

I wouldn't recommend the bondo idea.... bad idea and no need for it. You will actually create more work for yourself. Also, just like fiberglass resin, bondo does not like to bond to plastic as well as what paint does. So simply rough sand the pieces with 80 grit, then 120, 180 then use a filler primer. Prime the shit out of it... runs don't matter. Then sand that down with 240, then 300 wet and 400 wet. Should be butter smooth at this point and ready for paint.

I used the same process up to the 240 grit on the piece below, but this was getting textured, so I didn't bother with wet sanding. I just skipped to the texture coat after the 240 grit. Note: I actually used the texture coat as a filler primer since it's nice and thick.

[axiomatik]

Originally Posted by ILoveMyRHS13

Yep, ordered it brand new 4 years ago when I bought the car because the previous owner decided it would be a good idea to do something stupid with the wiring of the headlights, thus killing the original stalk. I just need a super minty windshield wiper stalk...

my stalks look the same. Bought a new signal/light stalk a few years ago because mine was worn out. Need to do the same for the wipers since it's all gray and chalky.

[Sugoi_Style]

My niece has the same pink rug in her room. I would like to see just how the final product will come out. I believe this is a first, ever.

It isn't my style, but I guess we'll have to wait and see...

[living4surf]

Filler primer is actually what I have used to do mine

[chiboy002]

Originally Posted by ILoveMyRHS13

nissanparts.cc has em for sale but i just gotta ask - wtf is the blue twist strip on the wiper stalk? I have no idea what it does on my car

[SaNTi]

Originally Posted by chiboy002

nissanparts.cc has em for sale but i just gotta ask - wtf is the blue twist strip on the wiper stalk? I have no idea what it does on my car

Changes how often your wipers work when you put it at the Intermittent? setting.

[Wake]

lol controls the speed of your wipers when on the lowest setting.

Full blue is fastest.

[Kuzumi]

Originally Posted by chiboy002

nissanparts.cc has em for sale but i just gotta ask - wtf is the blue twist strip on the wiper stalk? I have no idea what it does on my car

What's the part number since I can't seems to find it and they don't have any pictures? or just a link.

[chiboy002]

Originally Posted by SaNTi

Changes how often your wipers work when you put it at the Intermittent? setting.

Originally Posted by WakeBHR

lol controls the speed of your wipers when on the lowest setting.

Full blue is fastest.

thank you sirs, no wonder lol... i had no idea what they did and my lowest setting is slow as hell... i always thought it was like nozzle blast force or something

Originally Posted by Kuzumi

What's the part number since I can't seems to find it and they don't have any pictures? or just a link.

wiper part number : 25260-44F00
light part number : 25540-44F00

i'd give you a link to the shopping cart with em but it deletes the wiper one when i refresh lol

[BJManies]

Originally Posted by wh0aitznic0

Do any of you bro's have pics of cageless harness mounting using either the RSTB or C Pillar bar for angle correction?

This what your asking for?

[ILoveMyRHS13]

Great idea using cheap strut bars as the only thing holding you in.

He was asking if anyone used them to angle the harness to the correct angle while still bolting it to the floor.

[s14tan]

Originally Posted by ILoveMyRHS13

Great idea using cheap strut bars as the only thing holding you in.

That's sketch, I'd use my stock belt before that setup.

[Flicktitty]

Originally Posted by ILoveMyRHS13

Great idea using cheap strut bars as the only thing holding you in.

He was asking if anyone used them to angle the harness to the correct angle while still bolting it to the floor.

no shit, sounds dumb. wont pass tech anywhere. not to mention that is a pretty far pulled back and low for harness's imo.

[Flicktitty]

Teaser

[David48]

Workin on it. I'm trading my hud cluster for a woodgrain nardi so that'll be here soon. I need to keep working on the door panel though. I can't get the fabric to look good no matter what I try =/ Anyone have any tips?

[FLMadness]

if thats fosuede you need to get a material that actually stretches, other wise it will always look like garbage. also try to get an industrial fabric adhesive rather then 3m super 77 or 90. although super 90 will work

[Wake]

90 will work until it gets hot.

You need something industrial sprayed with a gun. and try to do small sections at a time and pull the fabric where it needs to go. And make sure you spray bothe the fabric and the door and wait for about 30secs until the glue sets a little bit.

[FLMadness]

^and that.. good tip..
if you cant get it perfect yourself you might want to take it to any interior shop.(the donk shops do it for nothing...lol)
they'll probably do it for 50 a side since its simple and small

[BJManies]

Originally Posted by ILoveMyRHS13

Great idea using cheap strut bars as the only thing holding you in.

He was asking if anyone used them to angle the harness to the correct angle while still bolting it to the floor.

A simple, "no thats not what he was asking" would have worked....but ok..

What makes bolting a harness to the thin floorboard any better?
Please explain. No sarcasm intended...

[FLMadness]

when it rips out you die faster

[drag113]

Originally Posted by David48

Workin on it. I'm trading my hud cluster for a woodgrain nardi so that'll be here soon. I need to keep working on the door panel though. I can't get the fabric to look good no matter what I try =/ Anyone have any tips?

Looks terrible

[Perfect Balance]

Originally Posted by BJManies

What makes bolting a harness to the thin floorboard any better?
Please explain. No sarcasm intended...

You don't bolt it to the thin floorboard. You bolt it to the factory seat belt locations for the rear.

The angle is still wrong though, but at least the belts won't tear off.

[Taniguchi_Is_#1]

god bless china.

[IIIXziuR]

Junyan Brand racing seat

[Jaescrub]

I have been wanting to sticker bomb something but wanted it to be lo key so I did this

[Wake]

That is honestly one of the first times I have thought stickerbombing was cool.

Bravo!

I dunno bout that hondata sticker tho. would be better if they were all relevant.

[WERDdabuilder]

Originally Posted by Jaescrub

I have been wanting to sticker bomb something but wanted it to be lo key so I did this

[Jaescrub]

A buddy of mine works at a tuning shop and gave em to me it's kinda a joke funny part about it is that your the first to even point them out good eye ha ha ha

[chiboy002]

Originally Posted by Taniguchi_Is_#1

god bless china.

i hope youre kidding cause those are more wrinkly than my nutsac