My gt2871r .64 makes over 400 rwhp!

[idahotuner]

finally got my car to the dyno this weekend. did 4 runs.
first was of the acuator at 10 then the 2nd was at 16 psi the last run was set at 20 psi with a amll spike to 24 right near the end of the pull.

here is the dyno chart.


stock block redtop sr20det

my mods include:
z32 maf
740cc injectors
BC valve springs
new valve seals
Bc 264 cams
greddy intake manifold
greddy ls intercooler
hks bov
megan racing exhuast manifold
gt2871r .64 turbo 52 trim
meggan racing o2 housing
top speed down pipe
3 inch ebay cat delete and cat back exhuast.

enthalpy tuned ecu. that i picked up on here that was tuned for the same mods i have.

i am getting ahold of scott to geta reflash and get my afr worked out at idle and cruising too.

i think i have a leak after my maf before my turbo. which i need to fix because the idle is fluctuating more then normal.

this is in my 93 s13 which i am geussing weighs i nat about 2600 pounds