Transmission to bell housing bolts. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

GetSillY · 05-08-2014, 07:16 AM

Whats up everyone, I bought a s14 trans for my project but it is missing the bolts that hold the transmission to the bell housing. I have done a good bit of searching and have been un able to find any info. Any help would be much appreciated! (s14 ka 5 speed trans)

***S14DB*** · 05-08-2014, 08:39 AM

http://www.ka24development.com/transmission_swap.html

The Saint · 05-08-2014, 08:46 AM

They are 14mil socket head with a "7" stamped on it. There are 4 different lengths. The shortest are on the 2 plates that tie the engine to the tranny on the bottom. There are 4 for each side. The next size up goes around to the left and top. The 2 for the starter are 2 different lengths. If the engine is in the car you will need a long extension a universal and 14mill socket. As you tighten the tyranny to the engine, periodically rotate the crank to make sure it isn't binding up.

GetSillY · 05-08-2014, 08:55 AM

Hey thanks, i think what you are talking about is trans to engine. Im looking for trans case to trans bell housing. and i dont have any of the to reference.

***S14DB*** · 05-08-2014, 08:57 AM

The center case bolts?

The Saint · 05-08-2014, 09:11 AM

Quote:

Originally Posted by GetSillY

Hey thanks, i think what you are talking about is trans to engine. Im looking for trans case to trans bell housing. and i dont have any of the to reference.

Those are also stamped 7 and have 12 mill size socket heads. Unlike GM TRANYS the " manual bell housing is half of the Tranny.

The Saint · 05-08-2014, 09:12 AM

And the grip length is 3 inches.

GetSillY · 05-08-2014, 09:28 AM

Quote:

Originally Posted by S14DB

The center case bolts?

yes case to bell housing

GetSillY · 05-08-2014, 09:29 AM

Quote:

Originally Posted by The Saint

Those are also stamped 7 and have 12 mill size socket heads. Unlike GM TRANYS the " manual bell housing is half of the Tranny.

ok great, thanks for the info! any idea on thread and bolt size?

***S14DB*** · 05-08-2014, 09:31 AM

Quote:

Originally Posted by GetSillY

yes case to bell housing

Like The Saint mentioned above the front half of the case includes the bell-housing.

GetSillY · 05-08-2014, 10:02 AM

Quote:

Originally Posted by S14DB

Like The Saint mentioned above the front half of the case includes the bell-housing.

gotcha, sorry if i was confusing/confused. Those are the bolts i need Front part of trans case/bell housing to second part of trans case.

The Saint · 05-08-2014, 10:08 AM

Go to a junkyard an look around for a 240sx or frontier truck. You might get lucky. 12 mil head, 3 inch length, and 7 size brass bolt.

GetSillY · 05-08-2014, 11:10 AM

Quote:

Originally Posted by The Saint

Go to a junkyard an look around for a 240sx or frontier truck. You might get lucky. 12 mil head, 3 inch length, and 7 size brass bolt.

yeah i could give that a try, junk yards are pretty sparse when it comes to 240's around here though maybe frontier, maybe lol. Thanks for the help guys.

05-08-2014, 07:16 AM	#1
GetSillY Join Date: Jul 2011 Location: eburg md Age: 37 Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	Transmission to bell housing bolts. Whats up everyone, I bought a s14 trans for my project but it is missing the bolts that hold the transmission to the bell housing. I have done a good bit of searching and have been un able to find any info. Any help would be much appreciated! (s14 ka 5 speed trans)

05-08-2014, 08:39 AM	#2
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 20,181 Trader Rating: (3) Feedback Score: 3 reviews	http://www.ka24development.com/transmission_swap.html __________________ Comments should be taken as Opinions not as Statements of Fact

05-08-2014, 08:57 AM	#5
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 20,181 Trader Rating: (3) Feedback Score: 3 reviews	The center case bolts? __________________ Comments should be taken as Opinions not as Statements of Fact

05-08-2014, 08:46 AM	#3
The Saint Leaky Injector Join Date: Mar 2008 Location: Hotlanta Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	They are 14mil socket head with a "7" stamped on it. There are 4 different lengths. The shortest are on the 2 plates that tie the engine to the tranny on the bottom. There are 4 for each side. The next size up goes around to the left and top. The 2 for the starter are 2 different lengths. If the engine is in the car you will need a long extension a universal and 14mill socket. As you tighten the tyranny to the engine, periodically rotate the crank to make sure it isn't binding up.

05-08-2014, 08:55 AM	#4
GetSillY Join Date: Jul 2011 Location: eburg md Age: 37 Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	Hey thanks, i think what you are talking about is trans to engine. Im looking for trans case to trans bell housing. and i dont have any of the to reference.

05-08-2014, 09:12 AM	#7
The Saint Leaky Injector Join Date: Mar 2008 Location: Hotlanta Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	And the grip length is 3 inches.

05-08-2014, 10:08 AM	#12
The Saint Leaky Injector Join Date: Mar 2008 Location: Hotlanta Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	Go to a junkyard an look around for a 240sx or frontier truck. You might get lucky. 12 mil head, 3 inch length, and 7 size brass bolt.