KA24E GSXR Intake Manifold - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

exact · 10-27-2022, 03:30 AM

Hey guys,

Testing water with this. I'm having a "intake manifold" made to adapt the KA24E to accept GSXR ITB's. If there's any additional interest beyond my single order, prices are dropping, so here's some info:

Manifold will be made from aluminium, base plate is waterjet-cut to 20mm thickness in case any resurfacing is necessary for flatness.
Piping will be 2,5mm wall thickness, pressed and cut to spec for both the intake and water pipe.
Everything you see will be tig-welded.

This solution is planned to use injectors in the GSXR throttle bodies.

Pricing levels are as follows:
680?/pc total order of 1 (achieved)
600?/pc total order of 2
550?/pc from 3 ordered pieces

This is for TOTAL pieces ordered, not per person.

Who would be interest / actually willing to buy? I am not the person making these, but will put in the order.

10-27-2022, 03:30 AM	#1
exact Join Date: Sep 2015 Location: Germany Age: 28 Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	KA24E GSXR Intake Manifold Hey guys, Testing water with this. I'm having a "intake manifold" made to adapt the KA24E to accept GSXR ITB's. If there's any additional interest beyond my single order, prices are dropping, so here's some info: Manifold will be made from aluminium, base plate is waterjet-cut to 20mm thickness in case any resurfacing is necessary for flatness. Piping will be 2,5mm wall thickness, pressed and cut to spec for both the intake and water pipe. Everything you see will be tig-welded. This solution is planned to use injectors in the GSXR throttle bodies. Pricing levels are as follows: 680?/pc total order of 1 (achieved) 600?/pc total order of 2 550?/pc from 3 ordered pieces This is for TOTAL pieces ordered, not per person. Who would be interest / actually willing to buy? I am not the person making these, but will put in the order.