Tim's MoneyPit Build - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Teister · 09-29-2015, 08:20 PM

Sup Zilvia, Ill try to keep you guys entertained with this one.

So i picked up a stock zenki and threw some coil overs on it and some xxr's and drove it for a while until the day came where i said fuck it race car! The rest is what followed..

Heres some shots of her before i took her off the road for build..

So lets get to the teardown photos..

I pulled the Ka out and pressure washed the outside up real good, then pulled her in to get to stripping the interior and dry iced all the sound deafening crap out. and painted the floor.

after gutting the car, taking out all electrical stuff, harnesses etc i decided to wrap the dash with leather, just out of pure boredom. came out...okay? lol

yes the Z is my daily

The wrinkles on the passanger side of the dash is from previous damage to the dash, not from wrapping dash

After a bunch of doing a little here and there the interior now looks like this, no its nowhere near done.

Interior has been my last priority for a long time so itll be last thing covered, sorry!!

So the first Sub project I started with was my rear suspension and in my opinion no shortcuts were taken..
Full PoweredbyMax rear suspension and dropped knuckles accompanied by SPL subframe bushings, and Megan Solid aluminum diff bushings.
The diff is a r33 diff with 5 bolt axles that came with the diff. Very low mileage on diff.
For my brakes , Im quad Z32

Retrofitting my Headlights at the moment..
Got everything from some great people at Theretrofitsource.com they are local and man do they have some cooooooooool shit in there store..

Don't have any pictures of them mounted yet, only the driver side one is done so far. The Circuit Sports clear headlight covers fit like crap. require a ton of cutting...sadly its only company pumping them out at a fair price.

As far as engines go, i have a couple lol..and i got screwed on both deals but no problem with that. Karma will catch em.

Teister · 11-15-2016, 11:10 AM

Why is that so close to coilover.. smh

Teister · 11-15-2016, 11:22 AM

Bought an RB26, it was trash. Thanks seller!

Got it looking alll puuurty and stuff,

Its about to go downhilllll!

Teister · 11-15-2016, 11:27 AM

Some more coverage of my Retrofitted headlights...

Teister · 12-11-2016, 01:17 PM

bump bump bump

octanejockey · 12-11-2016, 09:02 PM

good stuff! Where in GA are you?

rawgarage · 12-11-2016, 11:55 PM

Lights look good AF

Teister · 12-12-2016, 10:49 PM

its been neglected but ive got more coming for you guys. And im located in Gwinnett

[URL=http://s1275.photobucket.com/user/Tim_Zenki/media/IMG_4732_zpstukzmh66.jpg.html]

[/URL

cleaned the undercarraige and sprayed it.. ignore the driveshaft. its not staying just stored it on the car.[URL=http://s1275.photobucket.com/user/Tim_Zenki/media/IMG_4545_zpsyyxl23of.jpg.html]

[/URL

deleted factory fuel system

[URL=http://s1275.photobucket.com/user/Tim_Zenki/media/IMG_4542_zpsm8dzv8yb.jpg.html]

[/URL

projects projects projects..

the megan diff bushings that are pressed in seem like really good quality. im

Slipped a spacer thats included with the SPL subframe bushings kit

fuck that shit

Teister · 12-21-2016, 06:54 PM

[URL=http://s1275.photobucket.com/user/Tim_Zenki/media/IMG_1271_zps2gicsj3v.jpg.html]

[/URL

09-29-2015, 08:20 PM	#1
Teister Join Date: Feb 2015 Location: Ga Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Rising S14 Build Sup Zilvia, Ill try to keep you guys entertained with this one. So i picked up a stock zenki and threw some coil overs on it and some xxr's and drove it for a while until the day came where i said fuck it race car! The rest is what followed.. Heres some shots of her before i took her off the road for build.. So lets get to the teardown photos.. I pulled the Ka out and pressure washed the outside up real good, then pulled her in to get to stripping the interior and dry iced all the sound deafening crap out. and painted the floor. after gutting the car, taking out all electrical stuff, harnesses etc i decided to wrap the dash with leather, just out of pure boredom. came out...okay? lol yes the Z is my daily The wrinkles on the passanger side of the dash is from previous damage to the dash, not from wrapping dash After a bunch of doing a little here and there the interior now looks like this, no its nowhere near done. Interior has been my last priority for a long time so itll be last thing covered, sorry!! So the first Sub project I started with was my rear suspension and in my opinion no shortcuts were taken.. Full PoweredbyMax rear suspension and dropped knuckles accompanied by SPL subframe bushings, and Megan Solid aluminum diff bushings. The diff is a r33 diff with 5 bolt axles that came with the diff. Very low mileage on diff. For my brakes , Im quad Z32 Retrofitting my Headlights at the moment.. Got everything from some great people at Theretrofitsource.com they are local and man do they have some cooooooooool shit in there store.. Don't have any pictures of them mounted yet, only the driver side one is done so far. The Circuit Sports clear headlight covers fit like crap. require a ton of cutting...sadly its only company pumping them out at a fair price. As far as engines go, i have a couple lol..and i got screwed on both deals but no problem with that. Karma will catch em. Last edited by Teister; 12-29-2016 at 09:17 PM..

12-12-2016, 10:49 PM	#8
Teister Join Date: Feb 2015 Location: Ga Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	its been neglected but ive got more coming for you guys. And im located in Gwinnett [URL=http://s1275.photobucket.com/user/Tim_Zenki/media/IMG_4732_zpstukzmh66.jpg.html][/URL cleaned the undercarraige and sprayed it.. ignore the driveshaft. its not staying just stored it on the car.[URL=http://s1275.photobucket.com/user/Tim_Zenki/media/IMG_4545_zpsyyxl23of.jpg.html][/URL deleted factory fuel system[URL=http://s1275.photobucket.com/user/Tim_Zenki/media/IMG_4542_zpsm8dzv8yb.jpg.html][/URL projects projects projects.. the megan diff bushings that are pressed in seem like really good quality. im Slipped a spacer thats included with the SPL subframe bushings kit fuck that shit

12-21-2016, 06:54 PM	#9
Teister Join Date: Feb 2015 Location: Ga Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	[URL=http://s1275.photobucket.com/user/Tim_Zenki/media/IMG_1271_zps2gicsj3v.jpg.html][/URL

11-15-2016, 11:10 AM	#2
Teister Join Date: Feb 2015 Location: Ga Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Why is that so close to coilover.. smh

11-15-2016, 11:22 AM	#3
Teister Join Date: Feb 2015 Location: Ga Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Bought an RB26, it was trash. Thanks seller! Got it looking alll puuurty and stuff, Its about to go downhilllll!

11-15-2016, 11:27 AM	#4
Teister Join Date: Feb 2015 Location: Ga Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Some more coverage of my Retrofitted headlights...

12-11-2016, 01:17 PM	#5
Teister Join Date: Feb 2015 Location: Ga Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	bump bump bump

12-11-2016, 09:02 PM	#6
octanejockey Leaky Injector Join Date: Jul 2015 Location: Safety Harbor, FL Posts: 117 Trader Rating: (5) Feedback Score: 5 reviews	good stuff! Where in GA are you?

12-11-2016, 11:55 PM	#7
rawgarage Banned from the Marketplace Join Date: Oct 2007 Location: h o u s t o n Age: 35 Posts: 5,986 Trader Rating: (75) Feedback Score: 75 reviews	Lights look good AF