fl redemption build (typex s13)

[s14fbs]

THIS IS A COPY PASTE BUILD THREAD FROM ANOTHER FORUM SO SOME OF IT MIGHT SEEM A LITTLE WEIRD



so i sold my blue car






and bought this


then spent a bunch of money on all this










---------- Post added at 11:55 PM ---------- Previous post was at 11:51 PM ----------

ended up in a pile





then stripped it back down sent it off to paint



meanwhile i rebuilt the ka that was in it since its gonna be in there a few months till i can get everything toghter for a s14 sr



and dyed the rear seats and side door inserts black


picked up a uncracked dash


---------- Post added 11-23-2012 at 12:02 AM ---------- Previous post was 11-22-2012 at 11:55 PM ----------

picked it up from paint



wheels finally showed up


installed the new carpet front and black and some of the interior stuff picked up some checkered floor mats


installed the motor


mounted the front brakes


mounted some tires


then got it sitting pretty


had to add some stickers



stil need to install engine harness and enging bay brake lines ect bunch little stupid shit

alarm and keyless entry needs to be wired
and the dash and the rest of the interior installed

[s14fbs]

[/COLOR]got some wood cut for the floor of the rear floor


couple randoms




i need to make a bracket to keep the bumper flat its warped hence why the rear valence is twisted


buddy gave me his old pbm skid plate


also rolled the car out in the road so i can measure ride height since my driveway makes the car sit weird and took a couple his res pics





sorry if im picture whoring

tomorrow im gonna be installing the rear z brake setup if i can get modivated

[s14fbs]

Well been crazy busy and broke for the holidays
But I was able to wire in the new radio and speakers
I kinda went super OCD and color coated heat shrink the wires
Example
Purple is rear right speaker green is rear left, 12v power switch & constant are red and so and so on




Love it sounds amazing full Bluetooth no wires needed

Random garage picture


I leave for work in the am so while I'm gone ill be ordering everything to get it done now that the holidays are over with

Also my clear type x lights came in

[s14fbs]

then i ended up trading the ka that was in the car for this
soo excited
got the 6 speed swap

nismo flywheel that i need to find some info on im guessing there rare since i cant find a thing on them


also picked up
a optima stainless battery tray & SR RAD




Buddy brought me back this from j land for the front bumper


also got some mounts for all the cables brake lines ect


another project i started is steering column gauge pod i had one u buy in the s14 and did not like it with the placement of the gauges no way to adjust the angle ect so i decided to make my own i trimmed down a cup and glued it to the panel to hold and im going to resin the whole thing once the other side is mounted and then re texture the panel when done

[s14fbs]

finally got time from work and life to get the motor for the car pulled out the other car and on the stand to get torn down cleaned coated and made all pretty and fresh gasket ect



finally


motor came with a bunch of sweet goodies

moonpie oval downpipe my faviorite
circuit sports turbo lines
tomei style oil pan
exedy stage 3 clutch
tubular manifold
b&m shifter on the 5mt even though it wont be getting used
greddy i/c pipe - for sale
and old skool hks bov when they werent anooying -also for sale

gonna be ordering tomei arms turbo kit and proncams and some other odds and ends in a couple weeks

[s14fbs]

shaved and polished

[s14fbs]

fuel rail and intake are done

cams get delievered tomorrow era-1 70mm throttle body next week and ill be sending the turbo manifold off to get chrome ceramic coated and tomei arms kit installed in a couple weeks after vacation to the tail of the dragon





---------- Post added 04-12-2013 at 05:17 PM ---------- Previous post was 04-11-2013 at 11:48 PM ----------



came home from vacation to this sick throttle body

super awesome product


and one from vacation

[s14fbs]

throttle body installed and its so fucking rad port matched the intake it as much as i could


and u cant really tell but cleaned out the oil runners and installed the cams


and everything got dropped off to the coaters yesterday before i leave for colorado in the am and once i get back i should have a arms kit ready to be installed

couple updates on the build

picked up the ceramic coated turbo manifold looks super rad still looks dull since i have not buffed the coating yet


gotta a whole bunch of packages coming

first one showed up from enjuku brett always puts something funny in the box


isis ps line and rad hoses


and got a rb20 fan im going to run instead of spending money on a gktech one

TOMEI TURBO IS ON ITS WAY !!!!!!

[s14fbs]

major updates

got this cool thing

what is this u may ask




that is all
AND NOW ITS PRESENT TIME























not really

boom so excited

[Sansone]

Looking good! Very clean

[tricky_ab]

It's nice to see more people using the Tomei ARMS turbo. I can't wait to hear what you think of it. It's on my short list of choices of turbo's that I'm interested in.

[Konster]

Looks really good. What did you dye the seats with and do they feel crunchy?

[s14fbs]

Originally Posted by tricky_ab

It's nice to see more people using the Tomei ARMS turbo. I can't wait to hear what you think of it. It's on my short list of choices of turbo's that I'm interested in.

yeah im very excited to run this turbo i really liked the specs and what very few reviews i could find on it

Originally Posted by Konster

Looks really good. What did you dye the seats with and do they feel crunchy?

just the black fabric paint in a spray can at first its crunky but now that its been worn in kinda there no worse then the factory fabric there temporary anyways until i get 180 rear seats

[KoukiMonsta]

Rad car is rad

[Konster]

Originally Posted by s14fbs

yeah im very excited to run this turbo i really liked the specs and what very few reviews i could find on it


just the black fabric paint in a spray can at first its crunky but now that its been worn in kinda there no worse then the factory fabric there temporary anyways until i get 180 rear seats

Cool thanks, I'm planning on doing the exact same thing.

[energy0uth]

Looking through the corner, nicely done.

Sick car too. I need aero damnit.

[Bmxer300zx]

Nice build man looks really clean so far.
That nismo clutch is a good score my buddy got that and a nismo clutch with his s13 blacktop he got from jdmenginedepot. I made him buy one of the dirty ones that they hadn't pressure washed and pillaged yet turned out to have alota goodies on it lol

[s14fbs]

Originally Posted by Bmxer300zx

Nice build man looks really clean so far.
That nismo clutch is a good score my buddy got that and a nismo clutch with his s13 blacktop he got from jdmenginedepot. I made him buy one of the dirty ones that they hadn't pressure washed and pillaged yet turned out to have alota goodies on it lol

I don't have a Nismo clutch? I have a lightweight nismo dual mass flywheel since I'm running a s15 sr 6mt setup as pictured

[Bmxer300zx]

Originally Posted by s14fbs

I don't have a Nismo clutch? I have a lightweight nismo dual mass flywheel since I'm running a s15 sr 6mt setup as pictured

Shit i meant flywheel lol my buddy got a nismo flywheel/clutch combo on his s13 blacktop know they're different different style between the s13 and s15 flywheel but he looked as well and couldn't find much info on his.

[s14fbs]

got the turbo kit installed




went under the knife


and we have touchdown






made another 1000$ order today at enjuku
now back to work so i can make another paycheck and make another hefty order

[KendallH]

Love your motor! I'm doing the same with mine; polished/shaved VC, polished intake, clutch fan, etc. Would love to see this car in person some day.

[s14fbs]

pretty much waiting on parts to arrive

some of my tomei order arrived


still waiting on
tomei type s frp
tomei fuel rail adapter
tomei oil cap
fmic kit
cody ace a/c bracket
summit order with all my -an line and fittings
xrp fuel filter
aeromotive fuel pump
tial bov
drift armor front bash bar

seems like the last bits are taking forever

[coupesallday!]

Subbeddddddddd

[Prok0]

Come bring that thang out to Gainesville if me and Clay throw a track day together.

[s14fbs]

Originally Posted by Prok0

Come bring that thang out to Gainesville if me and Clay throw a track day together.

im so down

[Bumpkin203]

Really nice build man, I also have one of the Nismo flywheels, it came on my swap so idk anything about it or how rare it is.

[Mustache240]

wow good shit! keep it up!

[bc.]

Awesomesauce!!!!

What fan shroud is that?

[s14fbs]

50% of the -an stuff showed up yesterday

Still have to order all the 10 -an stuff for the catch can and p/s ect

Just waiting to get the catch can soo can see exactly what I need

[WristWork]

Keep going! Quality build right here, please never change those rims