Rev limiters - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TupperWare · 06-12-2017, 08:51 AM

I guess the fixes for this is different compared to the KA24E and the DE. But simply on my way to work i had the car in 4th and floored it just to have it cut out at 5k rpm. And it does the same in 5th as an actual safety. How can i remove these limiters? I literally don't have any sensor on my transmission hooked up except for my speed sensor. Sometimes when I'm driving my speedo will work or it won't at all. If it doesn't work it will cut 5th gear at 4k rpm. And if it is working it acts just like it did today.

chris_240sx · 06-13-2017, 12:17 PM

How fast are you going when it cuts out? You're moving pretty good if you're near the top of 4th. Our cars are speed governed at like 118 mph from the factory.

TupperWare · 06-17-2017, 11:38 PM

Not that fast I don't think, in like 5th gear once it hits the limiter I'm going 100. I don't have an accurate speedo so I have to use a GPS on my phone.

cotbu · 06-18-2017, 01:46 PM

Try depinning pin 32 iirc, from the ecu. Ka24de? This doesn't work for an Sr.

Sent from my LG-H631 using Tapatalk

TupperWare · 06-18-2017, 04:24 PM

Ka24e and wouldn't that stop the speedo from working entirely?

jedi03 · 06-18-2017, 04:39 PM

Get the auto ecu and there's no top speed limiter!

TupperWare · 06-18-2017, 04:41 PM

But there's also no rev limiter so that's a no from me

cotbu · 06-18-2017, 06:21 PM

No

Sent from my LG-H631 using Tapatalk

06-12-2017, 08:51 AM	#1
TupperWare Join Date: Mar 2015 Location: Oregon Age: 25 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Rev limiters I guess the fixes for this is different compared to the KA24E and the DE. But simply on my way to work i had the car in 4th and floored it just to have it cut out at 5k rpm. And it does the same in 5th as an actual safety. How can i remove these limiters? I literally don't have any sensor on my transmission hooked up except for my speed sensor. Sometimes when I'm driving my speedo will work or it won't at all. If it doesn't work it will cut 5th gear at 4k rpm. And if it is working it acts just like it did today.

06-18-2017, 01:46 PM	#4
cotbu Post Whore! Join Date: Sep 2005 Location: SWFL Age: 49 Posts: 3,318 Trader Rating: (3) Feedback Score: 3 reviews	Try depinning pin 32 iirc, from the ecu. Ka24de? This doesn't work for an Sr. Sent from my LG-H631 using Tapatalk __________________ LoverTechnologies "Half Broken Things!"

06-18-2017, 06:21 PM	#8
cotbu Post Whore! Join Date: Sep 2005 Location: SWFL Age: 49 Posts: 3,318 Trader Rating: (3) Feedback Score: 3 reviews	No Sent from my LG-H631 using Tapatalk __________________ LoverTechnologies "Half Broken Things!"

06-13-2017, 12:17 PM	#2
chris_240sx Zilvia Junkie Join Date: Mar 2009 Location: Washington Posts: 425 Trader Rating: (0) Feedback Score: 0 reviews	How fast are you going when it cuts out? You're moving pretty good if you're near the top of 4th. Our cars are speed governed at like 118 mph from the factory.

06-17-2017, 11:38 PM	#3
TupperWare Join Date: Mar 2015 Location: Oregon Age: 25 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Not that fast I don't think, in like 5th gear once it hits the limiter I'm going 100. I don't have an accurate speedo so I have to use a GPS on my phone.

06-18-2017, 04:24 PM	#5
TupperWare Join Date: Mar 2015 Location: Oregon Age: 25 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Ka24e and wouldn't that stop the speedo from working entirely?

06-18-2017, 04:39 PM	#6
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,836 Trader Rating: (8) Feedback Score: 8 reviews	Get the auto ecu and there's no top speed limiter!

06-18-2017, 04:41 PM	#7
TupperWare Join Date: Mar 2015 Location: Oregon Age: 25 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	But there's also no rev limiter so that's a no from me