Please help! Ignition fuse keeps blowing!
I need urgent help! My 92 s13 is having a issue with the ignition fuse, one day while doing a burnout my car gradually stalled while the burnout was taking place, I replace the main relay and the car worked perfectly fine for about 2 days then it started blowing the j clip 30a fuse and on the diagram it says it is the ignition fuse, the car has been down for about a week because everytime I put a new fuse in there they just pop after a ride in the car and I do not want to mess up the ECU and those fuses are hard to find. The car would ride perfectly but if I cut it off it will not come back on or even turn over, the clock stays on and everything electrical inside the car is dead, the headlights, back lights, and back up lights work. I've tried everything the only thing I have noticed is that there are two wires that are disconnected and they both lead to the positive battery terminal and back to the starter. My question is if anyone has an idea of what those wires are connected to? Or what keeps blowing my fuses? I tried tracking a short but I do not know where to start! Please help!
|