Maybe went overboard on SR build - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Touge_drifter · 02-04-2011, 11:13 PM

A friend suggested I post on here for my engine build & Its a S14 SR20det

here is what im working with.

Nissan s14 throttle body upgrade (NA 60mm)
Nismo engine bearings
Nismo clutch slave cylinder
Nismo stainless steel clutch line
Nismo clutch pivot fork bolt
Nismo engine/transmission mounts
Balanced & Blue printed
Custom coatings (dome & skirts)
Tomei 2.2liter stroker kit (88mm)
Tomei metal head gasket (1.2mm)
Tomei Procam camshafts (260in./260ex.)
Tomei valve springs
Tomei bronze valve guides
Tomei adjustable exhaust camshaft gear
Tomei oil cap
Tomei spark plug cover
Crower titaninum retainers
Crower stainless steel valves
Custom port & polish
Arp block/cylinder head studs
Greddy intake manifold (version 2)
Greddy oil pan
Greddy oil catch can
Greddy remote oil cooler (14 row)
Greddy oil filter relocation kit
Greddy engine pulley kit
Greddy Greddy rocker arm stoppers
Custom front mount intercooler
Custom intercooler piping
HKS bolw off valve (flat black)
HKS iron sleeves
Splitfire direct coil packs
Koyo aluminum radiator
FAL dual electric fans
Samco hose
Sard thermostat
Tomei fuel psi regulator
Bosch 1000cc fuel injectors
Power enterprise engine belts
SPEC Mini twin system(sponsorship)
Taka stainless steel turbo lines
Custom turbo outlet pipe
Tial wastegates 38mm
Full-Race turbo manifold
Forgerd performance hybrid twin scroll turbo (classified a/r)
XS engineering down pipe with catalyst converter delete
AEM EMS stand alone w/map conversion
Optima deep cycle battery
Walbro 255glph fuel pump (x2)
Swirl pot w/-AN fuel lines

Block (HKS) sleeved

Tomei 2.2 kit

Crank shaft in

Bottom end assembled

Touge_drifter · 02-04-2011, 11:15 PM

Other shots of the pistons and rods

S-Nation S13 · 02-04-2011, 11:17 PM

looking good bro, looking good

T-FAST · 02-04-2011, 11:18 PM

very nice!

Touge_drifter · 02-04-2011, 11:24 PM

Head

azsr20det · 02-04-2011, 11:31 PM

you nutsack lol
wish i could afford the tomei bottom end kit...
im stuck here slowly piecing everything together
so far i got camshafts.

cant wait to see where this goes

BoostSlideWayz · 02-04-2011, 11:40 PM

Fuck this makes me feel like a failure

Touge_drifter · 02-04-2011, 11:58 PM

Head bolted down

Thanks to SPEC for this AWESOME clutch

satek · 02-05-2011, 12:13 AM

Major $$$ build

Drifting-pedobear · 02-05-2011, 12:58 AM

lol that clutch is so thick.
16 plate clutch all siiick

right on man, this motor is one of the few that can be called "fully built"
looking forward to numbers.

NoPho4u · 02-05-2011, 01:01 AM

Looks pretty damn impressive with all that Tomei stuff but then a spec clutch...

Om1kron · 02-05-2011, 02:39 AM

Quote:

Originally Posted by NoPho4u

Looks pretty damn impressive with all that Tomei stuff but then a spec clutch...

lololololololololololol. spending tons of money isn't impressive.

NoPho4u · 02-05-2011, 08:35 AM

Spend 5K on some baller ass wheels

Top it off w/ some LING LONG TIRES LOL

Pandapants · 02-05-2011, 08:39 AM

mmmmm legitimacy

Touge_drifter · 02-05-2011, 10:38 AM

I like spec, Plus its free through my sponsorship. I had their modified 350z version (stage 3 + w/flywheel) on this engine before I did this build. As for the rims I have these.

Super advan version 2 front are 18x9 w/+15 and rear are 18x10 w/-8. it took me awhile to get (9 1/2 months) with the custom color (D1 spec gunmetal) and size.

Touge_drifter · 02-05-2011, 10:42 AM

Greddy fuel rail and 1000cc top feed injectors

Greddy S14 sr20 version 2 high port intake mainfold

NoPho4u · 02-05-2011, 10:42 AM

I was just giving you a hard time having all this top notch stuff but then having it topped off with the weakest link tho even if it was free. Of course it's clear money isn't an issue on your choice of parts. Why not go with a reputable brand with your own money.

OS Giken
Ogura Clutch
Nimso Copper Max
Exceddy

JSimpson · 02-05-2011, 10:50 AM

mannn should have went with the VE head. Stock Neo VVL head will outflow the best DET heads and has no rocker arms so you can rev it to the moon and never have a problem while your rockin 280 cams stock haha!!!

dr1ft32 · 02-05-2011, 10:52 AM

Let's see the car

jacobs13 · 02-05-2011, 10:53 AM

Who cares? ^^^^

But nice build man, I have the same sleeves, but you must to have robbed a bank to buy all this. Looking forward to see numbers and that turbo your hiding

Touge_drifter · 02-05-2011, 10:57 AM

I like spec, its holds 1300tq and has stock pedal feel. what makes spec the weak link? Wouldn't have minded the OS Giken.....It would match the transmission gears Im going with. The Nismo has a harsh engagement and spec is all I have ever used even before the sponsorship.

NoPho4u · 02-05-2011, 11:02 AM

Which Model Nismo are you referring to?

Also Spec clutch's are known to be budget minded american clutch which often times fail. Just do a search on here on their brand in general and you will find countless clutch's that didn't live up to their expectations.

I just felt all this money you spend on these upgrades almost goes to waste if your clutch isn't up to par.

shiftdrift · 02-05-2011, 11:02 AM

with this much money, i'd sell the built head and go p12 head.

Touge_drifter · 02-05-2011, 11:04 AM

I didnt think about the VE head. Didnt know if it would work on a S14 sr20det. heres the car

NoPho4u · 02-05-2011, 11:05 AM

Seen that car on here before. What are the details on the aero?

shiftdrift · 02-05-2011, 11:09 AM

it is your car, so if you like it that's great, i'm just not feeling the flat black, doesn't seem to be able to pull it off.

fckillerbee · 02-05-2011, 11:21 AM

the wheels are sex.....the amount of gap between your fender and the actual rear wheel makes me want to vomit on a daily basis...throw a 1 inch spacer on there and it'll do gods of wonder....

nice fucking build man....good luck trying to blow that up...very NICE.

Touge_drifter · 02-05-2011, 11:22 AM

I have to get it resprayed again. I wanted to do a ocean blue metallic, But kinda undecided on different color. as for the car being on here before. I just signed up on here in November.

S15 conversion (orgins bumpers, fenders & custom rear panels)
S15 wide body (+20mm-f & +80mm-r)
Satin matte black paint
AB Flug carbon fiber hood
Seibon carbon fiber trunk
Kouki taillights
Locking hood pins
Hid conversion kit
Advan Super advan ver.2 rims (discontinued D1GP spec gunmetal)
BFGoodrich T/A KDW2 tires 245/18-f & 285/18-r
Rotora 6piston front big brake kit
Rotora 4piston rear big brake kit
Project Kics Neo/Chrome lug nuts (open-ended)
Project Kics 60mm extended forged lug nuts
HKS hyper exhaust system (85mm)
Rearview camera (for mirror)
Window tint

Touge_drifter · 02-05-2011, 11:26 AM

Wheels are fix already. Heres the turbo (1st turbo), full race manifold, new Tial wastegate

shiftdrift · 02-05-2011, 11:29 AM

this thread is so full of win......and +1 on the ocean blue

02-04-2011, 11:13 PM	#1
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 44 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	Maybe went overboard on SR build A friend suggested I post on here for my engine build & Its a S14 SR20det here is what im working with. Nissan s14 throttle body upgrade (NA 60mm) Nismo engine bearings Nismo clutch slave cylinder Nismo stainless steel clutch line Nismo clutch pivot fork bolt Nismo engine/transmission mounts Balanced & Blue printed Custom coatings (dome & skirts) Tomei 2.2liter stroker kit (88mm) Tomei metal head gasket (1.2mm) Tomei Procam camshafts (260in./260ex.) Tomei valve springs Tomei bronze valve guides Tomei adjustable exhaust camshaft gear Tomei oil cap Tomei spark plug cover Crower titaninum retainers Crower stainless steel valves Custom port & polish Arp block/cylinder head studs Greddy intake manifold (version 2) Greddy oil pan Greddy oil catch can Greddy remote oil cooler (14 row) Greddy oil filter relocation kit Greddy engine pulley kit Greddy Greddy rocker arm stoppers Custom front mount intercooler Custom intercooler piping HKS bolw off valve (flat black) HKS iron sleeves Splitfire direct coil packs Koyo aluminum radiator FAL dual electric fans Samco hose Sard thermostat Tomei fuel psi regulator Bosch 1000cc fuel injectors Power enterprise engine belts SPEC Mini twin system(sponsorship) Taka stainless steel turbo lines Custom turbo outlet pipe Tial wastegates 38mm Full-Race turbo manifold Forgerd performance hybrid twin scroll turbo (classified a/r) XS engineering down pipe with catalyst converter delete AEM EMS stand alone w/map conversion Optima deep cycle battery Walbro 255glph fuel pump (x2) Swirl pot w/-AN fuel lines Block (HKS) sleeved Tomei 2.2 kit Crank shaft in Bottom end assembled __________________ No tune No life Last edited by Touge_drifter; 02-04-2011 at 11:59 PM..

02-04-2011, 11:15 PM	#2
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 44 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	Other shots of the pistons and rods __________________ No tune No life Last edited by Touge_drifter; 02-05-2011 at 10:59 AM..

02-04-2011, 11:24 PM	#5
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 44 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	Head __________________ No tune No life

02-04-2011, 11:40 PM	#7
BoostSlideWayz Nissanaholic! Join Date: Sep 2008 Location: Lebec Age: 34 Posts: 1,686 Trader Rating: (1) Feedback Score: 1 reviews	Fuck this makes me feel like a failure __________________ 1994 toyota supra...... n-a D= 1992 nissan 240sx KA24E-T fully Built =D

02-04-2011, 11:58 PM	#8
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 44 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	Head bolted down Thanks to SPEC for this AWESOME clutch __________________ No tune No life

02-04-2011, 11:17 PM	#3
S-Nation S13 Post Whore! Join Date: Jan 2008 Location: LAND of the LOST Posts: 4,083 Trader Rating: (92) Feedback Score: 92 reviews	looking good bro, looking good

02-04-2011, 11:18 PM	#4
T-FAST Leaky Injector Join Date: Jun 2010 Location: Harlingen Texas Posts: 65 Trader Rating: (2) Feedback Score: 2 reviews	very nice!

02-04-2011, 11:31 PM	#6
azsr20det Leaky Injector Join Date: Jun 2010 Location: az Posts: 148 Trader Rating: (0) Feedback Score: 0 reviews	you nutsack lol wish i could afford the tomei bottom end kit... im stuck here slowly piecing everything together so far i got camshafts. cant wait to see where this goes

02-05-2011, 12:13 AM	#9
satek Leaky Injector Join Date: Jan 2010 Location: Vancouver BC Age: 33 Posts: 132 Trader Rating: (0) Feedback Score: 0 reviews	Major $$$ build

02-05-2011, 12:58 AM	#10
Drifting-pedobear Zilvia Addict Join Date: Jan 2009 Location: seattle, wa Age: 33 Posts: 937 Trader Rating: (11) Feedback Score: 11 reviews	lol that clutch is so thick. 16 plate clutch all siiick right on man, this motor is one of the few that can be called "fully built" looking forward to numbers. __________________ RIGHTWHEELDRIVE.com

02-05-2011, 01:01 AM	#11
NoPho4u BANNED Join Date: Jan 2011 Location: SOCAL SON Age: 42 Posts: 53 Trader Rating: (0) Feedback Score: 0 reviews	Looks pretty damn impressive with all that Tomei stuff but then a spec clutch...

02-05-2011, 08:35 AM	#13
NoPho4u BANNED Join Date: Jan 2011 Location: SOCAL SON Age: 42 Posts: 53 Trader Rating: (0) Feedback Score: 0 reviews	Spend 5K on some baller ass wheels Top it off w/ some LING LONG TIRES LOL

02-05-2011, 08:39 AM	#14
Pandapants Zilvia Junkie Join Date: Mar 2008 Location: SoFla Age: 34 Posts: 302 Trader Rating: (4) Feedback Score: 4 reviews	mmmmm legitimacy

02-05-2011, 10:38 AM	#15
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 44 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	I like spec, Plus its free through my sponsorship. I had their modified 350z version (stage 3 + w/flywheel) on this engine before I did this build. As for the rims I have these. Super advan version 2 front are 18x9 w/+15 and rear are 18x10 w/-8. it took me awhile to get (9 1/2 months) with the custom color (D1 spec gunmetal) and size. __________________ No tune No life

02-05-2011, 10:42 AM	#16
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 44 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	Greddy fuel rail and 1000cc top feed injectors Greddy S14 sr20 version 2 high port intake mainfold __________________ No tune No life

02-05-2011, 10:50 AM	#18
JSimpson Banned from the Marketplace Join Date: Nov 2009 Location: Indiana Posts: 1,009 Trader Rating: (15) Feedback Score: 15 reviews	mannn should have went with the VE head. Stock Neo VVL head will outflow the best DET heads and has no rocker arms so you can rev it to the moon and never have a problem while your rockin 280 cams stock haha!!!

02-05-2011, 10:52 AM	#19
dr1ft32 Zilvia Junkie Join Date: Jan 2004 Location: fresno ca Posts: 380 Trader Rating: (2) Feedback Score: 2 reviews	Let's see the car __________________ 2013 Toyota Tacoma, Faster than your beater 240

02-05-2011, 10:53 AM	#20
jacobs13 Zilvia FREAK! Join Date: May 2009 Location: Long Beach Age: 32 Posts: 1,061 Trader Rating: (27) Feedback Score: 27 reviews	Who cares? ^^^^ But nice build man, I have the same sleeves, but you must to have robbed a bank to buy all this. Looking forward to see numbers and that turbo your hiding

02-05-2011, 10:57 AM	#21
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 44 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	I like spec, its holds 1300tq and has stock pedal feel. what makes spec the weak link? Wouldn't have minded the OS Giken.....It would match the transmission gears Im going with. The Nismo has a harsh engagement and spec is all I have ever used even before the sponsorship. __________________ No tune No life

02-05-2011, 11:02 AM	#22
NoPho4u BANNED Join Date: Jan 2011 Location: SOCAL SON Age: 42 Posts: 53 Trader Rating: (0) Feedback Score: 0 reviews	Which Model Nismo are you referring to? Also Spec clutch's are known to be budget minded american clutch which often times fail. Just do a search on here on their brand in general and you will find countless clutch's that didn't live up to their expectations. I just felt all this money you spend on these upgrades almost goes to waste if your clutch isn't up to par.

02-05-2011, 11:02 AM	#23
shiftdrift Nissanaholic! Join Date: Nov 2009 Location: indiana Age: 33 Posts: 2,242 Trader Rating: (42) Feedback Score: 42 reviews	with this much money, i'd sell the built head and go p12 head. __________________ SW Fab

02-05-2011, 11:04 AM	#24
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 44 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	I didnt think about the VE head. Didnt know if it would work on a S14 sr20det. heres the car __________________ No tune No life

02-05-2011, 11:05 AM	#25
NoPho4u BANNED Join Date: Jan 2011 Location: SOCAL SON Age: 42 Posts: 53 Trader Rating: (0) Feedback Score: 0 reviews	Seen that car on here before. What are the details on the aero?

02-05-2011, 11:09 AM	#26
shiftdrift Nissanaholic! Join Date: Nov 2009 Location: indiana Age: 33 Posts: 2,242 Trader Rating: (42) Feedback Score: 42 reviews	it is your car, so if you like it that's great, i'm just not feeling the flat black, doesn't seem to be able to pull it off. __________________ SW Fab

02-05-2011, 11:21 AM	#27
fckillerbee Post Whore! Join Date: Nov 2007 Location: Southern California Age: 39 Posts: 4,266 Trader Rating: (5) Feedback Score: 5 reviews	the wheels are sex.....the amount of gap between your fender and the actual rear wheel makes me want to vomit on a daily basis...throw a 1 inch spacer on there and it'll do gods of wonder.... nice fucking build man....good luck trying to blow that up...very NICE.

02-05-2011, 11:22 AM	#28
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 44 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	I have to get it resprayed again. I wanted to do a ocean blue metallic, But kinda undecided on different color. as for the car being on here before. I just signed up on here in November. S15 conversion (orgins bumpers, fenders & custom rear panels) S15 wide body (+20mm-f & +80mm-r) Satin matte black paint AB Flug carbon fiber hood Seibon carbon fiber trunk Kouki taillights Locking hood pins Hid conversion kit Advan Super advan ver.2 rims (discontinued D1GP spec gunmetal) BFGoodrich T/A KDW2 tires 245/18-f & 285/18-r Rotora 6piston front big brake kit Rotora 4piston rear big brake kit Project Kics Neo/Chrome lug nuts (open-ended) Project Kics 60mm extended forged lug nuts HKS hyper exhaust system (85mm) Rearview camera (for mirror) Window tint __________________ No tune No life

02-05-2011, 11:26 AM	#29
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 44 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	Wheels are fix already. Heres the turbo (1st turbo), full race manifold, new Tial wastegate __________________ No tune No life

02-05-2011, 11:29 AM	#30
shiftdrift Nissanaholic! Join Date: Nov 2009 Location: indiana Age: 33 Posts: 2,242 Trader Rating: (42) Feedback Score: 42 reviews	this thread is so full of win......and +1 on the ocean blue __________________ SW Fab