|
11-19-2012, 08:36 PM
|
#1 |
|
Zilvia Junkie
 
|
s13 competition ready drift car for sale
I’m selling my 240 to help pay for my new car build. It’s a 89 240sx coupe, not sure how many miles on it, but only the roof is original anyway. The car meets drift competition rules and will probably be pretty competitive with a good driver. It made 350rwhp on the current setup and has the potential for more. I’m sure I’m forgetting a lot but here are the basic mods:
Engine/drivetrain: S13 blacktop block bored .5 over and decked Balanced and micro polished crank ACL race bearings JE 9:1 pistons also .5 over Eagle rods Greddy oil pan New oil pump S13 blacktop head mild port and polish and decked BC springs BC retainers Stock valves Greddy ras 262/274 BC cams New valve seals Cometic head gasket Custom valve cover w/ two 10an fittings Lightweight crank pulley Lightweight accessory pullies All an lines on power steering system Custom power steering reservoir Custom breather tank Custom coolant surge tank IAC delete Custom intake manifold 70mm throttle body Wiggins connectors V mount intercooler V mount radiator w/ 12an lines Top mount fuel rail 1000cc deutchwerks injectors 6an fuel lines Aero motive pre and post filters Aero motive FPR Walbro 255 inline pump 8 gallon fuel cell Custom stainless steel top mount manifold Garrett gtx2867r turbo Stainless an turbo lines 3 inch turbo back exhaust Tial 38mm waste gate 18 lb springs Lightweight steel flywheel Clutch masters Fx400 clutch Stock sr20det transmission One piece steel driveshaft Welded diff Suspension/steering/brakes: Silk Road rm8 coilovers PBM tension, toe, traction and ruca’s arms tien inner/outer tie rods rt tuning knuckles with crazy angle polyurethane steering rack bushings SPL solid subframe bushings 5 lug hubs 180sx type x front brakes rebuilt rear calipers with ebc yellow stuff pads pbm Hydro hand brake Rota torque wheels 18x9.5 front and rear bridgestone potenza tires fresh RT Tuning alignment Chassis: Silvia front end 30mm widebody front fenders 50mm rear over fenders whats left of the front and rear bumpers, side skirts still decent Full roll cage rear fire wall custom seat mounts corbeau seats camlock harnesses fire extinguisher Nardi steering wheel autometer tach It’s a track car. It gets driven hard, but has been well maintained. It’s been hit a couple times, hit a couple walls and a whole bunch of cones. It’s not a show car. It runs and drives great and is ready for competition. I can include a new rear clip if you want to make it pretty again. Also have an open trailer and a parts car that can go with it for the right price. I may also consider parting out if someone wants to buy the motor set up. $11000 for the car with trailer and parts car. $10000 for the car $6500 for the motor setup                        Email [email protected] or call (978) 460-1841 if you're interested.
__________________
Last edited by noname7198; 11-21-2012 at 06:22 AM.. |
|
|
| Sponsored Links |
|
11-20-2012, 05:19 AM
|
#6 | |
|
Zilvia Junkie
|
Quote:
__________________
|
|
|
|
|
|
11-28-2012, 01:27 PM
|
#8 |
|
Post Whore!
 
Join Date: May 2006
Location: where waldo is
Age: 42
Posts: 3,266
Trader Rating: (16)
  Feedback Score: 16 reviews
|
how is the comparison of using BC 264/272 cams compare to others i've seen like HKS 264/272 cams or Tomei's....etc especially running on that turbo if you've been in other SRed. Is it closely the same as the bigger brand names or slightly different.
__________________
18g and 20g turbo users click on me http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html 
|
|
|
|
|
11-28-2012, 08:59 PM
|
#9 |
|
Zilvia Addict
 
|
Hey guys its mike vogt idk whos posting from this name otherwise id message ya on facebook can you shoot me some info on the trailer im super interested thanks!
|
|
|
|
|
11-30-2012, 12:13 AM
|
#10 |
|
Leaky Injector
Join Date: Apr 2012
Location: Hometown: Waukesha WI, Current resident of: Forest City NC, Moving to: Arizona PHX area
Posts: 64
Trader Rating: (0)
Feedback Score: 0 reviews
|
nice car! what brand/name hood is that??
__________________
1/89 s13 XE. Tilton pedal box 5lug VLSD Sil front z32 brakes Volvo 5cyl w58 |
|
|
|
|
12-01-2012, 03:31 PM
|
#15 |
|
Zilvia Junkie
|
Never compared other cam set ups but I like the way this motor feels.
Mike I replied on Facebook about the trailer. Would prefer to sell the car with the trailer but if you want it we can work something out. 04srt21 I texted you and never heard back. My number is 978 460 1841 if you're still interested.
__________________
|
|
|
|
|
01-24-2013, 10:32 PM
|
#28 |
|
Zilvia Member
 
Join Date: Oct 2010
Location: New jersey
Age: 33
Posts: 258
Trader Rating: (5)
Feedback Score: 5 reviews
|
That front bumper has seen some cool shit i bet lol. Wish i had a truck i could tow this with i would buy it in a heartbeat, Need to get a car ready for march. GLWS
|
|
|
|
 |
| Bookmarks |
|
|
).
Linear Mode
