TX FS/FT: VOLK GT-C 19x 8.5 +27 & 19x9.5 +24 5x114.3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

VoBoy · 04-06-2010, 12:24 AM

*** WHEELS ARE SOLD AS OF 4/24! *** MODS PLEASE LOCK THREAD!
***PENDING SALE AS OF 4/23!***

PM me if interested. Local pick up only! Will not ship!

Up for sale are some used Gunmetal w/ Polish Lip VOLK GT-C wheels. Lots of battle scars (or love wounds lol) and the price reflects this.

Comes with tires mounted, however rears are bald (and wrong tire size anyway) but good enough if you wanted to test mount. 245/35 19 Nitto 555's on front with ~50% left.

Specs:
19x8.5 +27 (~23-24lbs)
19x9.5 +24 (~24-25lbs)
Wheels will clear OEM Brembo's. These are old school offsets compared to the current standard w/ Z's and G's, but nothing 20MM+ spacers can't fix.

Center caps, lug nuts (12x1.25) and key are included (only one type of lug that will work with these wheels), 2 RAYS valve stem caps (other two were stolen

.) You will need your own center hub rings adapters though.

I'm not as OCD as some of the members on here, but for potential buyers I've listed all the flaws I can point out so that there are no surprises:

1. One of the front wheel has some curbage (~2inches worth but not crazy).
2. The other front had a bend that was repaired by Wheels America, so the finish on the lip is without a clearcoat, somewhat more shiner than the others. Also a nick on the spoke.
3. One of the rears has a slight bend that's hard to see sometimes, but doesn't leak air or vibrate. Held air even after a remount with different tire. Also has a small nick on the lip.
4. The other rear has some rash and clear coat is stripping a bit around them.
5. Lips have scratches on the clear coat, more noticably around the valve stem area. (Common among Volks I believe)
6. Minor, but Inner Barrel stickers of specs are gone.

Found this pic online, courtesy of ST350z, hope he doesn't mind.... these wheels look great on a black 240sx!
http://i437.photobucket.com/albums/q...z/IMG_9285.jpg

Finally,
SOLD SOLD SOLD!
Thanks for looking!

Flushladyz · 04-08-2010, 07:30 AM

dumb question...you willing to part out just the rears. possible trade or sell.

illest · 04-08-2010, 10:01 AM

too bad you're not local.. I'll pick these up 4sure!
Unless you'll do $1,100 shipped to FL?

gunmetalr32 · 04-08-2010, 10:07 AM

Quote:

Originally Posted by VoBoy

Center caps, lug nuts (12x1.25) and key are included (only one type of lug that will work with these wheels), 2 RAYS valve stem caps (other two were stolen

.

they stole my blue ray valve stem caps too.. fuckin sucks man and you need to buy a whole new valve stem from rays just to get a cap @ $10 a peice

VoBoy · 04-09-2010, 10:33 AM

Sorry won't part this out. Shipping would at least be $200 on top of my pickup asking price. $1,100 shipped is just too low. I'd be willing to ship if someone had the RPF1's or LE37's to trade me though.

And yes...finding out someone stole your valve stem caps is a pretty shitty feeling lol. But it's just a cap... all good.

z33tt08 · 04-11-2010, 02:25 AM

consider sold if you still have them.

VoBoy · 04-17-2010, 12:15 PM

last bump...

niZmoRB25 · 04-19-2010, 01:24 PM

great price, only if you were closer!!!

Richie

silvianerd · 04-19-2010, 06:03 PM

Hey are you willing to sell 1200 shipped to 38141 ?

rb26man · 04-19-2010, 06:51 PM

these would look sex on a s13

ghetto180 · 08-04-2010, 12:29 AM

I know you sold them but what is the hub bore size for the hub rings you got for these wheels, and you said only one type of lugnuts work, what type are they, I ask because i just bought a set of zilvia and deployed overseas and want to get everything i need to have them on my s14 when i get back, anything will help, thanks

04-06-2010, 12:24 AM	#1
VoBoy Join Date: Jan 2010 Location: Houston, TX Posts: 22 Trader Rating: (1) Feedback Score: 1 reviews	FS/FT: VOLK GT-C 19x 8.5 +27 & 19x9.5 +24 5x114.3 * WHEELS ARE SOLD AS OF 4/24! * MODS PLEASE LOCK THREAD! *PENDING SALE AS OF 4/23!* PM me if interested. Local pick up only! Will not ship! Up for sale are some used Gunmetal w/ Polish Lip VOLK GT-C wheels. Lots of battle scars (or love wounds lol) and the price reflects this. Comes with tires mounted, however rears are bald (and wrong tire size anyway) but good enough if you wanted to test mount. 245/35 19 Nitto 555's on front with ~50% left. Specs: 19x8.5 +27 (~23-24lbs) 19x9.5 +24 (~24-25lbs) Wheels will clear OEM Brembo's. These are old school offsets compared to the current standard w/ Z's and G's, but nothing 20MM+ spacers can't fix. Center caps, lug nuts (12x1.25) and key are included (only one type of lug that will work with these wheels), 2 RAYS valve stem caps (other two were stolen .) You will need your own center hub rings adapters though. I'm not as OCD as some of the members on here, but for potential buyers I've listed all the flaws I can point out so that there are no surprises: 1. One of the front wheel has some curbage (~2inches worth but not crazy). 2. The other front had a bend that was repaired by Wheels America, so the finish on the lip is without a clearcoat, somewhat more shiner than the others. Also a nick on the spoke. 3. One of the rears has a slight bend that's hard to see sometimes, but doesn't leak air or vibrate. Held air even after a remount with different tire. Also has a small nick on the lip. 4. The other rear has some rash and clear coat is stripping a bit around them. 5. Lips have scratches on the clear coat, more noticably around the valve stem area. (Common among Volks I believe) 6. Minor, but Inner Barrel stickers of specs are gone. Found this pic online, courtesy of ST350z, hope he doesn't mind.... these wheels look great on a black 240sx! http://i437.photobucket.com/albums/q...z/IMG_9285.jpg Finally, SOLD SOLD SOLD! Thanks for looking! Last edited by VoBoy; 08-04-2010 at 10:08 AM..

04-19-2010, 06:51 PM	#10
rb26man Zilvia Addict Join Date: Oct 2007 Location: where the hood ckatz is at Age: 37 Posts: 891 Trader Rating: (2) Feedback Score: 2 reviews	these would look sex on a s13 __________________

08-04-2010, 12:29 AM	#11
ghetto180 Zilvia Junkie Join Date: Jan 2007 Location: Seattle, WA Posts: 341 Trader Rating: (5) Feedback Score: 5 reviews	gt-c I know you sold them but what is the hub bore size for the hub rings you got for these wheels, and you said only one type of lugnuts work, what type are they, I ask because i just bought a set of zilvia and deployed overseas and want to get everything i need to have them on my s14 when i get back, anything will help, thanks

04-08-2010, 07:30 AM	#2
Flushladyz Leaky Injector Join Date: Apr 2010 Location: charlotte Age: 42 Posts: 66 Trader Rating: (0) Feedback Score: 0 reviews	dumb question...you willing to part out just the rears. possible trade or sell.

04-08-2010, 10:01 AM	#3
illest Zilvia Junkie Join Date: Jan 2010 Location: sunny FL Posts: 348 Trader Rating: (10) Feedback Score: 10 reviews	too bad you're not local.. I'll pick these up 4sure! Unless you'll do $1,100 shipped to FL?

04-09-2010, 10:33 AM	#5
VoBoy Join Date: Jan 2010 Location: Houston, TX Posts: 22 Trader Rating: (1) Feedback Score: 1 reviews	Sorry won't part this out. Shipping would at least be $200 on top of my pickup asking price. $1,100 shipped is just too low. I'd be willing to ship if someone had the RPF1's or LE37's to trade me though. And yes...finding out someone stole your valve stem caps is a pretty shitty feeling lol. But it's just a cap... all good.

04-11-2010, 02:25 AM	#6
z33tt08 Join Date: Apr 2010 Location: houston Age: 42 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	consider sold if you still have them.

04-17-2010, 12:15 PM	#7
VoBoy Join Date: Jan 2010 Location: Houston, TX Posts: 22 Trader Rating: (1) Feedback Score: 1 reviews	last bump...

04-19-2010, 01:24 PM	#8
niZmoRB25 Join Date: Oct 2008 Location: Merced Age: 44 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	great price, only if you were closer!!! Richie

04-19-2010, 06:03 PM	#9
silvianerd Join Date: Dec 2009 Location: memphis TN Posts: 33 Trader Rating: (1) Feedback Score: 1 reviews	Hey are you willing to sell 1200 shipped to 38141 ?