BMW 326rb build thread... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ctnewman · 01-31-2007, 07:28 AM

Pretty simple yet a bit time consuming.

Yesterday I wire wheeled and sanded the driver's side floor pan making sure to get all of the rust off. Most of it was actually just rust dust from a few problem spots:

Then, using some 16GA plates, I tacked the plates over the rust from the inside:

Next, I will fill in the seams with seam sealant and then paint the floorpan with rust inhibiting paint. This is a lot easier than I thought it was going to be.

01-31-2007, 07:28 AM	#11
ctnewman Zilvia Junkie Join Date: Apr 2004 Location: buffalo,ny Age: 42 Posts: 541 Trader Rating: (0) Feedback Score: 0 reviews	Pretty simple yet a bit time consuming. Yesterday I wire wheeled and sanded the driver's side floor pan making sure to get all of the rust off. Most of it was actually just rust dust from a few problem spots: Then, using some 16GA plates, I tacked the plates over the rust from the inside: Next, I will fill in the seams with seam sealant and then paint the floorpan with rust inhibiting paint. This is a lot easier than I thought it was going to be.