|
Chat General Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
03-03-2016, 08:24 AM | #32 |
Zilvia Addict
Join Date: Nov 2006
Location: Southeast Division
Age: 38
Posts: 818
Trader Rating: (6)
Feedback Score: 6 reviews
|
Looks good so far, i'd definitely buy one. I'm sure anyone who actually has the plastic oem nissan divider know's that it doesnt stay in place good enough & can pop out if you have something there using it as a cup holder.
|
03-03-2016, 02:52 PM | #35 |
Zilvia Junkie
|
Would this design be any better? This is just a paper mach-up but the actual one could have a plate that ran flush to the back of the holder to make a divided pocket for your phones. The pocket would be almost 1 3/4" x 3 1/4" at the deepest part.
It would be possible but you'll have to add your own padding. You could use some adhesive backed foam paper from a hobby store for the padding. They are only about $1 per sheet. |
03-03-2016, 02:58 PM | #36 |
Zilvia Junkie
|
Could anyone give me an exact measurement on the width of one of these consoles with the divider? They would need to have calipers or something for an accurate reading. Tape measure won't cut it. I just want to make sure Nissan didn't pull a fast one on me here. Thanks
|
03-03-2016, 07:13 PM | #37 |
Zilvia Junkie
|
|
03-07-2016, 05:16 PM | #41 |
Zilvia Junkie
|
Here's a few of the latest pics. This is the production prototype so it looks just like what the actual one will be. You will notice in pics #2 and #3 that the holder has a back plate that runs from the top to the bottom to keep stuff from sliding under it, essentially "dividing" off the back pocket. This way you have the divider and a cup holder.
Also I still need those accurate measurements for the S14 consoles with the divider slot. If anyone with a console and a set of calipers could take a quick measurement I'd really appreciate it. My console measures 3.210" wide at the front of the pocket for reference but it gets a little wider as you move to the back. |
03-08-2016, 07:48 AM | #44 | |
Zilvia Junkie
|
Quote:
No it doesn't slide. It attaches with two-sided tape and holds very well in place. |
|
03-08-2016, 12:20 PM | #48 |
Zilvia Junkie
|
Thanks but I already have those measurements. That's the console I currently have too. It has to be the one with the divider slot.
|
03-21-2016, 10:27 AM | #49 |
Zilvia Junkie
|
I got the parts back from being CNC routed so it shouldn't be too much longer.
|
03-29-2016, 07:52 PM | #50 |
Zilvia Junkie
|
S14 cup holders are finally available. You can view our ad on the home page here: http://zilvia.net/f/showthread.php?t=626658
Plus there's a surprise product for S14 owners! Thanks for everyone's input! It really helped shape this product into something that everyone can enjoy. |
Bookmarks |
Tags |
240sx cup holder, cup holder, cupholder, s14 cup holder, s14 cupholder |
|
|