Z33(350z) to SR20 Transmission Adapters! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

maverickmotorsports · 07-16-2012, 05:10 PM

$430 shipped for the adapter plate!

Z33 Transmission to SR20 Adapter!

Hey Zilvia! We had a really good response to the original thread and we just got more adapters in!

These are the new Version 2 adapters. The new plates have a slight modification which allows a little more clearance with bottom mount turbos.

So why a Z33 transmission? Keep reading!

The gearing is superior to an SR/KA/Z32 transmission. All of the gears are shorter now so you won't find yourself stuck between 2-3 gear on courses any more. You can now leave it in 3rd gear and rip! Not to mention having a 6 speed transmission that is tough and not made of glass like any SR/KA transmission!

This transmission is also significantly stronger. There are local 9 second Z33's that have yet to blow a trans. STOP BREAKING STOCK TRANSMISSIONS! Check out the gear size comparison!

You will retain your SR Clutch/Flywheel. You do not need a Z33 clutch.

What you need for the swap:

-Adapter plate
-Transmission mount
-Driveshaft
-Shortened shifter bracket
-Modifying Z33 Bellhousing
-Stainless steel clutch line. There are many vendors out there who sell these.

Pricing:

Just the plate and hardware is $430 shipped

Additionally other mods are available in stages depending on what you want to pay for.

Bellhousing Machining. Not just any machine shop can do this because of the size of the bellhousing. $80 +ship

Shifter modification. You send in your shifter and it gets modified then sent back to you. $125 +ship

Transmission crossmember. You can retain the original rubber mount(aftermarket mounts will also work). $100 +ship

A video of the first drive.

The two-tone s13 in front has the Z33 trans installed.

ImportTuner feature on the car we did the prototyping on.

Once this is done, you become rad!

Contact:

Feel free to contact me through;
PM
[email protected]
five two zero 444-4415

Thanks, George

heyitzalan · 07-16-2012, 06:07 PM

if i buy these stuff, where can i get the driveshaft from? i have a s13 sr in a s14 chassis.

Black240Ct · 07-16-2012, 06:55 PM

Quote:

Originally Posted by heyitzalan

if i buy these stuff, where can i get the driveshaft from? i have a s13 sr in a s14 chassis.

i did this trans swap and after i got the trans in with the crossmember made and such i measured the length from the trans to the diff.. called drive shaft shop.. or some shop like it (i forget the name) said i needed a z33 input with 240sx diff side and the length and they made one for me.. one piece steel was about $250

GrimDrifter · 07-16-2012, 07:17 PM

i have this tranny but without a shifter bracket. Can i buy a modified one from you, or do i need to locate one first?

chino38 · 07-16-2012, 08:31 PM

is there an adapter for a KA engine?

K_style · 07-17-2012, 09:18 AM

So it's pretty much $735 + Tranny for complete swap then?

Lynk444 · 07-17-2012, 09:42 AM

How do you make it so the stock speedometer works on a S13 or S14? That is what is holding me back on this.

maverickmotorsports · 07-17-2012, 12:04 PM

Quote:

Originally Posted by chino38

is there an adapter for a KA engine?

We have a completed prototype but we've been having trouble finding someone locally to do test fitting for us.

Quote:

Originally Posted by K_style

So it's pretty much $735 + Tranny for complete swap then?

$755 includes the adapter, hardware, bellhousing mod, shifter relocation, trans crossmember, and clutch line. Shipping would be added on top of that to ship the completed kit back to you.

Quote:

Originally Posted by Lynk444

How do you make it so the stock speedometer works on a S13 or S14? That is what is holding me back on this.

You would need an ABS diff with the dakota digital speedo conversion box. Alternatively you can also use the S15 diff.

turbo2nr · 07-17-2012, 12:20 PM

i heard that the starter and flywheel doesn't line up with the ka/z33 setup? did you find a way around this??

LoFoSho · 07-17-2012, 02:47 PM

Quote:

Originally Posted by george

$755 includes the adapter, hardware, bellhousing mod, shifter relocation, trans crossmember, and clutch line. Shipping would be added on top of that to ship the completed kit back to you.

What's the turnaround time and what does return shipping usually cost for everything???

I PM'd you this question and I never heard back from you when I asked if you had these in stock a few weeks back.

maverickmotorsports · 07-17-2012, 04:29 PM

Quote:

Originally Posted by turbo2nr

i heard that the starter and flywheel doesn't line up with the ka/z33 setup? did you find a way around this??

The bellhousing interferes with the starter nose. You just need to cut a small scallop out of the bellhousing to get it to fit. There are no issues with the flywheel since you'd be using the KA starter and flywheel.

Quote:

Originally Posted by LoFoSho

What's the turnaround time and what does return shipping usually cost for everything???

I PM'd you this question and I never heard back from you when I asked if you had these in stock a few weeks back.

Everything is in stock right now. Typical turn around is 2-3 days. Sometimes it might be quicker or longer depending on how busy we get.

Michael E · 07-17-2012, 04:39 PM

I need one for a ka24de/Z33 trans. Wish you were closer you could use mine as a prototype

GrimDrifter · 07-17-2012, 07:53 PM

Quote:

Originally Posted by george

We have a completed prototype but we've been having trouble finding someone locally to do test fitting for us.

$755 includes the adapter, hardware, bellhousing mod, shifter relocation, trans crossmember, and clutch line. Shipping would be added on top of that to ship the completed kit back to you.

You would need an ABS diff with the dakota digital speedo conversion box. Alternatively you can also use the S15 diff.

It's not easy to find an s15 diff, I've been looking.

Bolf · 07-18-2012, 01:51 PM

Hi George , what is the situation in using this with a s15 flywheel and clutch ?

Thanks

maverickmotorsports · 07-20-2012, 10:25 AM

Quote:

Originally Posted by Bolf

Hi George , what is the situation in using this with a s15 flywheel and clutch ?

Thanks

Replied to PM.

TougeKid1 · 07-20-2012, 11:18 AM

wait are the gear ratios from the Z33 same as the z32/sr/ka trans?

street240sx · 07-26-2012, 04:57 PM

Time to go work on my car so I could possibly help test

As for the ratios you can look them up. Z33 gears are closer together and overall a little short that's why I'm going q45 ratio

maverickmotorsports · 07-29-2012, 07:50 PM

Gear ratios are not the same. Everyone likes them better for drifting because they are spaced better.

350z/G35:

1st Gear Ratio: 3.794:1
2nd Gear Ratio: 2.324:1
3rd Gear Ratio: 1.624:1
4th Gear Ratio: 1.271:1
5th Gear Ratio: 1.000:1
6th Gear Ratio: 0.794:1

SR20:

1st Gear Ratio: 3.321:1
2nd Gear Ratio: 1.902:1
3rd Gear Ratio: 1.308:1
4th Gear Ratio: 1.000:1
5th Gear Ratio: 0.759:1
6th Gear Ratio: N/A

As you can see, the Z33 3rd gear is like a "2.5 gear" on the SR. Most guys with SR transmissions find that they are either sitting on the limiter in 2nd and not getting enough wheel speed or bogging out in 3rd and not spooling up the turbo. The Z33 trans has 3rd gear with is much better geared for the SR20 powerband.

ExtremeD · 07-29-2012, 10:59 PM

gears are nice and all but what about how strong it is. how much hp and abuse can it handle?

maverickmotorsports · 08-14-2012, 07:16 PM

There are local Z/G cars doing 900whp on slicks. They keep breaking the diffs. The transmissions are fine.

Our test vehicle has 550whp, 12" wide VIP wheels, and hasn't blown a Z33 trans in 2+ years. Constant abuse and drifting as well.

JFoxx · 08-24-2012, 06:45 AM

what exactly needs to be machined on the bell housing? and how would i place an order for 1?

maverickmotorsports · 08-30-2012, 02:26 PM

The bellhousing needs to be milled down to assure that the input shaft goes into the pilot bearing.

You can place an order by sending payment via Paypal. PM sent.

ZacKisBacK_Fr · 09-27-2012, 12:41 PM

I need this, I saw a CD009 brand new for a good price on the board so I would do the swap. PM me the price for everything needed for an easy install shipped to France 01170.
You don't need the gear box right?
Thank you

JUNSupraTT · 10-08-2012, 01:08 AM

I need this. sent pm for detail. Thanks.

ZacKisBacK_Fr · 10-08-2012, 03:18 AM

Same here, anyone around?

EsChassisLove · 10-08-2012, 05:38 AM

I can't wait to blow my SR tranny and justify this haha

ZacKisBacK_Fr · 10-08-2012, 06:09 AM

already my second OEM gearbox this season, I really need something that won't break!! :-(

JUNSupraTT · 10-09-2012, 10:19 AM

payment sent. check out your paypal account and my pm george!

JUNSupraTT · 10-12-2012, 02:13 PM

any update for my order yet? :-)

edpogi · 10-15-2012, 09:38 PM

Give George a little time to recover from Fd. He'll get back to you. Very good guy to deal with.

07-16-2012, 05:10 PM	#1
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	Z33(350z) to SR20 Transmission Adapters! $430 shipped for the adapter plate! Z33 Transmission to SR20 Adapter! Hey Zilvia! We had a really good response to the original thread and we just got more adapters in! These are the new Version 2 adapters. The new plates have a slight modification which allows a little more clearance with bottom mount turbos. So why a Z33 transmission? Keep reading! The gearing is superior to an SR/KA/Z32 transmission. All of the gears are shorter now so you won't find yourself stuck between 2-3 gear on courses any more. You can now leave it in 3rd gear and rip! Not to mention having a 6 speed transmission that is tough and not made of glass like any SR/KA transmission! This transmission is also significantly stronger. There are local 9 second Z33's that have yet to blow a trans. STOP BREAKING STOCK TRANSMISSIONS! Check out the gear size comparison! You will retain your SR Clutch/Flywheel. You do not need a Z33 clutch. What you need for the swap: -Adapter plate -Transmission mount -Driveshaft -Shortened shifter bracket -Modifying Z33 Bellhousing -Stainless steel clutch line. There are many vendors out there who sell these. Pricing: Just the plate and hardware is $430 shipped Additionally other mods are available in stages depending on what you want to pay for. Bellhousing Machining. Not just any machine shop can do this because of the size of the bellhousing. $80 +ship Shifter modification. You send in your shifter and it gets modified then sent back to you. $125 +ship Transmission crossmember. You can retain the original rubber mount(aftermarket mounts will also work). $100 +ship A video of the first drive. The two-tone s13 in front has the Z33 trans installed. ImportTuner feature on the car we did the prototyping on. Once this is done, you become rad! Contact: Feel free to contact me through; PM [email protected] five two zero 444-4415 Thanks, George __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

07-16-2012, 08:31 PM	#5
chino38 Zilvia Member Join Date: Apr 2012 Location: paramount Posts: 186 Trader Rating: (0) Feedback Score: 0 reviews	is there an adapter for a KA engine? __________________ Wtb: convertible map light harness

07-17-2012, 12:20 PM	#9
turbo2nr Post Whore! Join Date: Jan 2005 Location: queens NYC Age: 38 Posts: 2,561 Trader Rating: (8) Feedback Score: 8 reviews	i heard that the starter and flywheel doesn't line up with the ka/z33 setup? did you find a way around this?? __________________ s14 kouki ka-t

07-17-2012, 04:39 PM	#12
Michael E Zilvia Member Join Date: Apr 2011 Location: Alabama, U.S.A. Age: 34 Posts: 292 Trader Rating: (5) Feedback Score: 5 reviews	I need one for a ka24de/Z33 trans. Wish you were closer you could use mine as a prototype __________________ Instagram: @michaelelsea

07-29-2012, 07:50 PM	#18
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	Gear ratios are not the same. Everyone likes them better for drifting because they are spaced better. 350z/G35: 1st Gear Ratio: 3.794:1 2nd Gear Ratio: 2.324:1 3rd Gear Ratio: 1.624:1 4th Gear Ratio: 1.271:1 5th Gear Ratio: 1.000:1 6th Gear Ratio: 0.794:1 SR20: 1st Gear Ratio: 3.321:1 2nd Gear Ratio: 1.902:1 3rd Gear Ratio: 1.308:1 4th Gear Ratio: 1.000:1 5th Gear Ratio: 0.759:1 6th Gear Ratio: N/A As you can see, the Z33 3rd gear is like a "2.5 gear" on the SR. Most guys with SR transmissions find that they are either sitting on the limiter in 2nd and not getting enough wheel speed or bogging out in 3rd and not spooling up the turbo. The Z33 trans has 3rd gear with is much better geared for the SR20 powerband. __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

07-16-2012, 06:07 PM	#2
heyitzalan Zilvia Addict Join Date: Oct 2006 Location: NEW YORK F!@$ING CITY Posts: 701 Trader Rating: (15) Feedback Score: 15 reviews	if i buy these stuff, where can i get the driveshaft from? i have a s13 sr in a s14 chassis.

07-16-2012, 07:17 PM	#4
GrimDrifter Leaky Injector Join Date: Jan 2004 Location: Cactus, AZ Age: 43 Posts: 107 Trader Rating: (0) Feedback Score: 0 reviews	i have this tranny but without a shifter bracket. Can i buy a modified one from you, or do i need to locate one first?

07-17-2012, 09:18 AM	#6
K_style Post Whore! Join Date: Dec 2007 Location: Henderson, NV Posts: 7,666 Trader Rating: (63) Rides Gallery: K_style Feedback Score: 63 reviews	So it's pretty much $735 + Tranny for complete swap then?

07-17-2012, 09:42 AM	#7
Lynk444 Leaky Injector Join Date: Mar 2010 Location: Gilbert, AZ Age: 41 Posts: 60 Trader Rating: (4) Feedback Score: 4 reviews	How do you make it so the stock speedometer works on a S13 or S14? That is what is holding me back on this.

07-18-2012, 01:51 PM	#14
Bolf Join Date: May 2012 Location: Uk Age: 44 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	Hi George , what is the situation in using this with a s15 flywheel and clutch ? Thanks

07-20-2012, 11:18 AM	#16
TougeKid1 Leaky Injector Join Date: Jul 2010 Location: santa monica Posts: 98 Trader Rating: (0) Feedback Score: 0 reviews	wait are the gear ratios from the Z33 same as the z32/sr/ka trans?

07-26-2012, 04:57 PM	#17
street240sx Zilvia Addict Join Date: Apr 2010 Location: AZ Posts: 805 Trader Rating: (22) Feedback Score: 22 reviews	Time to go work on my car so I could possibly help test As for the ratios you can look them up. Z33 gears are closer together and overall a little short that's why I'm going q45 ratio

07-29-2012, 10:59 PM	#19
ExtremeD Leaky Injector Join Date: Aug 2006 Location: norcal Age: 37 Posts: 50 Trader Rating: (0) Feedback Score: 0 reviews	gears are nice and all but what about how strong it is. how much hp and abuse can it handle?

08-14-2012, 07:16 PM	#20
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	There are local Z/G cars doing 900whp on slicks. They keep breaking the diffs. The transmissions are fine. Our test vehicle has 550whp, 12" wide VIP wheels, and hasn't blown a Z33 trans in 2+ years. Constant abuse and drifting as well. __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

08-24-2012, 06:45 AM	#21
JFoxx BANNED Join Date: May 2008 Location: SD & OC Posts: 722 Trader Rating: (3) Feedback Score: 3 reviews	what exactly needs to be machined on the bell housing? and how would i place an order for 1?

08-30-2012, 02:26 PM	#22
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	The bellhousing needs to be milled down to assure that the input shaft goes into the pilot bearing. You can place an order by sending payment via Paypal. PM sent. __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

09-27-2012, 12:41 PM	#23
ZacKisBacK_Fr Leaky Injector Join Date: Sep 2012 Location: France Age: 46 Posts: 81 Trader Rating: (0) Feedback Score: 0 reviews	I need this, I saw a CD009 brand new for a good price on the board so I would do the swap. PM me the price for everything needed for an easy install shipped to France 01170. You don't need the gear box right? Thank you __________________

10-08-2012, 01:08 AM	#24
JUNSupraTT Join Date: Nov 2008 Location: MI/Seoul, Kor Age: 43 Posts: 27 Trader Rating: (1) Feedback Score: 1 reviews	I need this. sent pm for detail. Thanks. __________________ jdm Supra rz t04r dbb/264 cam [email protected]

10-08-2012, 03:18 AM	#25
ZacKisBacK_Fr Leaky Injector Join Date: Sep 2012 Location: France Age: 46 Posts: 81 Trader Rating: (0) Feedback Score: 0 reviews	Same here, anyone around? __________________

10-08-2012, 05:38 AM	#26
EsChassisLove Nissanaholic! Join Date: Jan 2011 Location: San Diego Age: 35 Posts: 2,090 Trader Rating: (26) Feedback Score: 26 reviews	I can't wait to blow my SR tranny and justify this haha __________________ IG/TikTok-ThatS14_Z06guy

10-08-2012, 06:09 AM	#27
ZacKisBacK_Fr Leaky Injector Join Date: Sep 2012 Location: France Age: 46 Posts: 81 Trader Rating: (0) Feedback Score: 0 reviews	already my second OEM gearbox this season, I really need something that won't break!! :-( __________________

10-09-2012, 10:19 AM	#28
JUNSupraTT Join Date: Nov 2008 Location: MI/Seoul, Kor Age: 43 Posts: 27 Trader Rating: (1) Feedback Score: 1 reviews	payment sent. check out your paypal account and my pm george! __________________ jdm Supra rz t04r dbb/264 cam [email protected]

10-12-2012, 02:13 PM	#29
JUNSupraTT Join Date: Nov 2008 Location: MI/Seoul, Kor Age: 43 Posts: 27 Trader Rating: (1) Feedback Score: 1 reviews	any update for my order yet? :-) __________________ jdm Supra rz t04r dbb/264 cam [email protected]

10-15-2012, 09:38 PM	#30
edpogi Leaky Injector Join Date: Feb 2004 Location: lansdale, pa Posts: 81 Trader Rating: (4) Feedback Score: 4 reviews	Give George a little time to recover from Fd. He'll get back to you. Very good guy to deal with.