SR20DET tranny bolts thread pitch - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Turb · 04-01-2016, 04:49 PM

I know this has been covered but my bolts aren't threading in nicely into my block after having it on the stand, and I wanted to clean the holes up on the block to the bell housing and everyone says its M12 - 1.75 and I have a tap thats that size but it seems like its a little too bit and its going to make the hole much bigger causing my bolts to not fit.

04-01-2016, 04:49 PM	#1
Turb Leaky Injector Join Date: Jun 2015 Location: Arizona Age: 27 Posts: 88 Trader Rating: (0) Feedback Score: 0 reviews	SR20DET tranny bolts thread pitch I know this has been covered but my bolts aren't threading in nicely into my block after having it on the stand, and I wanted to clean the holes up on the block to the bell housing and everyone says its M12 - 1.75 and I have a tap thats that size but it seems like its a little too bit and its going to make the hole much bigger causing my bolts to not fit.