CA S14 SR20DET Swap *Disassembled* - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

matthewman09 · 11-12-2013, 12:57 AM

Alright folks here it is. Having some issues along the way and can't afford to finish my build. My loss, your gain.
Nothing was wrong with the motor, I only took it apart to do a full build on it. Now I am out of space and money and other circumstances are forcing me to sell.

It is a complete motor swap, MINUS the turbo.
S14 SR20DET with Transmission.

Currently the head is taken off. Had it machined and cleaned and reassembled with the Brian Crower BC0200 Valve Springs/Retainers kit with Brian Crower Valves.
I have the receipt in HAND to prove it. All the head needs is new cams.

Nissan OEM Gasket Kit

Alternator

Power Steering pump

MAFS

Igniter Chip

Intake/Exhaust Manifold.

ECU

Upper and lower wire harness. Already wired to drop into an S13

The Block is still complete.

Transmission shifts great and has slightly used Exedy Stage 1 Clutch

For some reason I can't upload pictures at this moment. Will have some up ASAP.

Text for pictures and quickest response! 831-277-3074

Basically you just need to buy cams, and a turbo. And slap it all back together. Or build up the bottom end and the Reassemble and you will have a monster.

I do have the stock cams to go with it as well.

$1,500

ALSO WILLING TO PART OUT.

matthewman09 · 11-14-2013, 06:09 PM

Bumppppp!!

K_style · 11-14-2013, 11:16 PM

Where in Socal are you? Does it come with MAF?

matthewman09 · 11-15-2013, 10:34 AM

Quote:

Originally Posted by K_style

Where in Socal are you? Does it come with MAF?

Zipcode is 93955

and yes it comes with the MAF. literally a full swap

G5SR20240 · 11-15-2013, 10:56 AM

Would you be willing to sell just the bottom end?

matthewman09 · 11-15-2013, 10:59 AM

Quote:

Originally Posted by G5SR20240

Would you be willing to sell just the bottom end?

What would you offer for the bottom end?

matthewman09 · 11-30-2013, 11:18 AM

BUMP. The swap is complete. Just need a turbo and cams.

Also willing to PART OUT.

elucid · 11-30-2013, 11:55 AM

i'll take the starter if you're willing to part out. text/call me 562-652-0574.

jerry_beans · 12-01-2013, 04:11 AM

If you part it out I want the power steering tensioner.!!!

JDM king240 · 12-09-2013, 06:51 PM

what is condition of bottom end and how many miles?
would u be able to ship bottom block if i purchased and payed for shipping? 94566 CA

matthewman09 · 12-09-2013, 07:38 PM

Sorry my bad I don't have the bottom end anymore.
Still have all accessories and the built head.

Sent from my iPhone using Tapatalk

nissanhoe4show · 12-10-2013, 10:24 AM

turbo oil lines and stock exhaust manifold?

matthewman09 · 12-10-2013, 10:25 AM

I got the stock exhaust and intake manifolds. No turbo lines.

Sent from my iPhone using Tapatalk

yingiang · 12-10-2013, 10:32 AM

how much for harness and ecu?

matthewman09 · 12-10-2013, 10:33 AM

$120

Sent from my iPhone using Tapatalk

11-12-2013, 12:57 AM	#1
matthewman09 Zilvia Junkie Join Date: Mar 2012 Location: 831 Posts: 303 Trader Rating: (2) Feedback Score: 2 reviews	S14 SR20DET Swap Disassembled Alright folks here it is. Having some issues along the way and can't afford to finish my build. My loss, your gain. Nothing was wrong with the motor, I only took it apart to do a full build on it. Now I am out of space and money and other circumstances are forcing me to sell. It is a complete motor swap, MINUS the turbo. S14 SR20DET with Transmission. Currently the head is taken off. Had it machined and cleaned and reassembled with the Brian Crower BC0200 Valve Springs/Retainers kit with Brian Crower Valves. I have the receipt in HAND to prove it. All the head needs is new cams. Nissan OEM Gasket Kit Alternator Power Steering pump MAFS Igniter Chip Intake/Exhaust Manifold. ECU Upper and lower wire harness. Already wired to drop into an S13 The Block is still complete. Transmission shifts great and has slightly used Exedy Stage 1 Clutch For some reason I can't upload pictures at this moment. Will have some up ASAP. Text for pictures and quickest response! 831-277-3074 Basically you just need to buy cams, and a turbo. And slap it all back together. Or build up the bottom end and the Reassemble and you will have a monster. I do have the stock cams to go with it as well. $1,500 ALSO WILLING TO PART OUT. Last edited by matthewman09; 11-30-2013 at 11:17 AM..

12-01-2013, 04:11 AM	#9
jerry_beans Zilvia FREAK! Join Date: Oct 2011 Location: El Paso Tejas Posts: 1,007 Trader Rating: (27) Feedback Score: 27 reviews	If you part it out I want the power steering tensioner.!!! __________________ IG @jerry_beans_

12-10-2013, 10:24 AM	#12
nissanhoe4show Zilvia Addict Join Date: Apr 2009 Location: sunny california Posts: 904 Trader Rating: (31) Feedback Score: 31 reviews	turbo oil lines and stock exhaust manifold? __________________

11-14-2013, 06:09 PM	#2
matthewman09 Zilvia Junkie Join Date: Mar 2012 Location: 831 Posts: 303 Trader Rating: (2) Feedback Score: 2 reviews	Bumppppp!!

11-14-2013, 11:16 PM	#3
K_style Post Whore! Join Date: Dec 2007 Location: Henderson, NV Posts: 7,666 Trader Rating: (63) Rides Gallery: K_style Feedback Score: 63 reviews	Where in Socal are you? Does it come with MAF?

11-15-2013, 10:56 AM	#5
G5SR20240 Zilvia Member Join Date: Jan 2011 Location: San Diego Age: 39 Posts: 230 Trader Rating: (9) Feedback Score: 9 reviews	Would you be willing to sell just the bottom end?

11-30-2013, 11:18 AM	#7
matthewman09 Zilvia Junkie Join Date: Mar 2012 Location: 831 Posts: 303 Trader Rating: (2) Feedback Score: 2 reviews	BUMP. The swap is complete. Just need a turbo and cams. Also willing to PART OUT.

11-30-2013, 11:55 AM	#8
elucid Zilvia Member Join Date: Dec 2010 Location: 562 Age: 35 Posts: 188 Trader Rating: (4) Feedback Score: 4 reviews	i'll take the starter if you're willing to part out. text/call me 562-652-0574.

12-09-2013, 06:51 PM	#10
JDM king240 Zilvia Junkie Join Date: Jan 2011 Location: california CA Posts: 438 Trader Rating: (5) Feedback Score: 5 reviews	what is condition of bottom end and how many miles? would u be able to ship bottom block if i purchased and payed for shipping? 94566 CA

12-09-2013, 07:38 PM	#11
matthewman09 Zilvia Junkie Join Date: Mar 2012 Location: 831 Posts: 303 Trader Rating: (2) Feedback Score: 2 reviews	Sorry my bad I don't have the bottom end anymore. Still have all accessories and the built head. Sent from my iPhone using Tapatalk

12-10-2013, 10:25 AM	#13
matthewman09 Zilvia Junkie Join Date: Mar 2012 Location: 831 Posts: 303 Trader Rating: (2) Feedback Score: 2 reviews	I got the stock exhaust and intake manifolds. No turbo lines. Sent from my iPhone using Tapatalk

12-10-2013, 10:32 AM	#14
yingiang Zilvia FREAK! Join Date: Mar 2007 Location: Dallas Age: 39 Posts: 1,306 Trader Rating: (17) Feedback Score: 17 reviews	how much for harness and ecu?

12-10-2013, 10:33 AM	#15
matthewman09 Zilvia Junkie Join Date: Mar 2012 Location: 831 Posts: 303 Trader Rating: (2) Feedback Score: 2 reviews	$120 Sent from my iPhone using Tapatalk